Bengie
New Member
- Joined
- Feb 17, 2011
- Messages
- 29 (0.01/day)
- Location
- Wisconsin
System Name | Meh |
---|---|
Processor | i7-920 stock |
Motherboard | Dell PoS |
Cooling | 3x120mm 1x200mm and a slot cooler aimed at my video card |
Memory | Patriot 1600 @ 1066 7-7-7-20-1 |
Video Card(s) | XFX6950 @ 910/1420 |
Storage | WD 640 Blue |
Case | Antec 900 |
Audio Device(s) | Integrated RealTek |
Power Supply | Antec NEW TP750 |
Software | Win7 Ult x64 |
I've been having an issue with BC2 recently(past week) that causes my computer to freeze after ~20-30min of play. The screen stops, sound starts to repeat that last 0.5sec of audio and nothing responds. No BSOD, just a sudden lock up.
BC2 is the only program that does this. My computer runs with no issues and I let it run 24/7.
I have tried Heaven 2.5 for a 1 hour 15min, Kombustor 2.0 DX11 on burn-in for an hour, Team Fortress 2 for an hour, Civ5 for 4 hours with DX 11, memtest for 48 hours, prime95 for 24 hours, and I run CPU+GPU folding at night. No issues. As long as I don't run BC2, my computer will run 24/7 between Windows updates.
Did an sfc /scannow, Steam integrity check, 11.2 ATI drivers, RealTek 2.58, also tried disabling my RealTek in the bios. I uninstalled both ATI and RealTek Drivers, rebooted, ran driver sweeper, rebooted, reinstalled the drivers.
Win7 64, ATI 6950, 6GB of ram, i7-920, RealTek onboard. GPU runs at 40c during BC2 and ~60% load. Kombustor/Heaven/Folding actually get my GPU to 100% which my cards runs only 60c.
Antec 750 PSU that has 4 rails, the 6pins feeding my 6950 are on dedicated rails that share nothing with anything else and reviews of my PSU showed each 6pin capable of handling 330watts, with extremely smooth voltage output, which is waaayyy above spec.
Thanks for any ideas
BC2 is the only program that does this. My computer runs with no issues and I let it run 24/7.
I have tried Heaven 2.5 for a 1 hour 15min, Kombustor 2.0 DX11 on burn-in for an hour, Team Fortress 2 for an hour, Civ5 for 4 hours with DX 11, memtest for 48 hours, prime95 for 24 hours, and I run CPU+GPU folding at night. No issues. As long as I don't run BC2, my computer will run 24/7 between Windows updates.
Did an sfc /scannow, Steam integrity check, 11.2 ATI drivers, RealTek 2.58, also tried disabling my RealTek in the bios. I uninstalled both ATI and RealTek Drivers, rebooted, ran driver sweeper, rebooted, reinstalled the drivers.
Win7 64, ATI 6950, 6GB of ram, i7-920, RealTek onboard. GPU runs at 40c during BC2 and ~60% load. Kombustor/Heaven/Folding actually get my GPU to 100% which my cards runs only 60c.
Antec 750 PSU that has 4 rails, the 6pins feeding my 6950 are on dedicated rails that share nothing with anything else and reviews of my PSU showed each 6pin capable of handling 330watts, with extremely smooth voltage output, which is waaayyy above spec.
Thanks for any ideas