Hello guys
I bought a sapphire 6950 dirt 3 edition cheap in hope that i could fix it , but no matter what i do in atiflash it will give me ( NO ADAPTOR FOUND )
The card is not recognised in windows , not anywhere .. its like its physically not even there
The guy told me he ran a batch file and flicked the switch or something along those lines .. and now the card wont boot at all , though the fans are spinning and the card seems to be in working order .
It wont boot off either switch pos #1 or #2 , windows wont recognise the card only the pci one .
I have an old nvidia pci card im using at the moment so i can attempt to fix / reflash / hardmod the card and get it working .
I was reading around and came across this http://www.techpowerup.com/forums/showthread.php?t=115240
Does the same thing apply to the 6950 ? can i jump the pins and succesfully reflash the card like he did ? Wizzard ..
i really dont care to screw this card up because it is anyway .. i will do whatever to fix it
Any help would be greatly appreciated , i know the guys here know alot in comparison to other forums .
thankyou !
i solder a wire from pin 1 to pin 8 ? and atiflash should recognise the card then .. snip the wire and flash ? am i right ..
This is so frustrating , i have tried everything ! this is my last hope .
I bought a sapphire 6950 dirt 3 edition cheap in hope that i could fix it , but no matter what i do in atiflash it will give me ( NO ADAPTOR FOUND )
The card is not recognised in windows , not anywhere .. its like its physically not even there
The guy told me he ran a batch file and flicked the switch or something along those lines .. and now the card wont boot at all , though the fans are spinning and the card seems to be in working order .
It wont boot off either switch pos #1 or #2 , windows wont recognise the card only the pci one .
I have an old nvidia pci card im using at the moment so i can attempt to fix / reflash / hardmod the card and get it working .
I was reading around and came across this http://www.techpowerup.com/forums/showthread.php?t=115240
Does the same thing apply to the 6950 ? can i jump the pins and succesfully reflash the card like he did ? Wizzard ..
i really dont care to screw this card up because it is anyway .. i will do whatever to fix it
Any help would be greatly appreciated , i know the guys here know alot in comparison to other forums .
thankyou !
i solder a wire from pin 1 to pin 8 ? and atiflash should recognise the card then .. snip the wire and flash ? am i right ..
This is so frustrating , i have tried everything ! this is my last hope .
Last edited: