Uptime73
New Member
- Joined
- Feb 5, 2005
- Messages
- 109 (0.02/day)
- Location
- Columbus, Ohio USA
System Name | custom built clone |
---|---|
Processor | AMD Phenom 9950 Quad Core (Agena) |
Motherboard | ASUS M3A78-EM |
Cooling | Zalman CNPS9700 LED |
Memory | OCZ Fatal1ty PC2 8500 4 GB (2 x 2GB) |
Video Card(s) | Visiotek ATI Radeon 3650 |
Storage | Western Digital 320 GB SATA II hard drive |
Display(s) | Proview CRT |
Audio Device(s) | onboard |
Power Supply | 475 watt not sure of brand |
Software | Vista Ultimate Edition x64, Service Pack 2 |
Hello all. I am running OCCT to test staility and it crashes about 4 minutes into the test. ItS giveing me a code 4, which is a calculation. What should I do?
I have Iwill P4HT motherboard with Intel 2.4 GHz processor with 1 stick of ! GB memory (PNY 2700 333 MHz). The memory is set to 266. The AGP/PCI slots are locked at 33/66. Vcore voltage is set to 1.5 V. Thanks.
- Josh
I have Iwill P4HT motherboard with Intel 2.4 GHz processor with 1 stick of ! GB memory (PNY 2700 333 MHz). The memory is set to 266. The AGP/PCI slots are locked at 33/66. Vcore voltage is set to 1.5 V. Thanks.
- Josh