- Joined
- Dec 9, 2009
- Messages
- 646 (0.12/day)
- Location
- South East, United Kingdom
System Name | Swag |
---|---|
Processor | Intel Xeon E3110 4GHz |
Motherboard | GIGABYTE GA-G31M-ES2L |
Cooling | Scythe Infinity I Push-Pull w/ AS5 |
Memory | 2x2GB Transcend 800MHz DDR2 @ 890MHz 1.9v |
Video Card(s) | Palit nVIDIA GTX460 1GB 800/1600/2000 |
Storage | Crucial M4 64GB |
Display(s) | LG Flatron M1917TM 1280x1024 @ 60Hz |
Audio Device(s) | Realtek HD Audio |
Power Supply | OCZ StealthXStream 2 600W |
Software | Windows 7 Professional 64-bit |
Basically just made a new PC
ASUS P5LP-LE
X1300 PCI-E
2GB 533MHz
Win Xp Pro SP3
all worked amazingly. uninstalled video drivers. windows did some updates before it shut down. shut down ok, then i changed the graphics card from x1300 to 7950gt, and it freezes on boot screen
switched back to x1300, still freezes on boot screen.
set jumper to clear cmos, turned pc on, freezes at boot screen again
then i put x850xt in, freezes at boot screen. removed 6 pin power connector to x850xt, get a warning that says "NO POWER CONNECTOR TO GRAPHICS CARD", so i turn off and connect it. still freezes at boot screen.
fucking hell, all i did was swiTch a graphics card, then when i put it back it doesnt care!!
WHAT !
seriously i spent all day fixing this thing up and now it just fucks me over, im so annoyed
any suggestions?
ASUS P5LP-LE
X1300 PCI-E
2GB 533MHz
Win Xp Pro SP3
all worked amazingly. uninstalled video drivers. windows did some updates before it shut down. shut down ok, then i changed the graphics card from x1300 to 7950gt, and it freezes on boot screen
switched back to x1300, still freezes on boot screen.
set jumper to clear cmos, turned pc on, freezes at boot screen again
then i put x850xt in, freezes at boot screen. removed 6 pin power connector to x850xt, get a warning that says "NO POWER CONNECTOR TO GRAPHICS CARD", so i turn off and connect it. still freezes at boot screen.
fucking hell, all i did was swiTch a graphics card, then when i put it back it doesnt care!!
WHAT !
seriously i spent all day fixing this thing up and now it just fucks me over, im so annoyed
any suggestions?