CPU Temperature High even idle :(

[Januka.OC]

I do that last month bro i have done this things

I have Re Delied and apply TGC
Die and IHS
before i apply i clean everything untill i see it 100% clean.

I use Neil polish, Isopropyl alcohol, Arcticlean kit so i know i clean very well.

Then i have applied new thermal everything is fine back then. Not it's not been months its beed 20 days or 30 days let me check woow it's not last month i do that in this month Aprail 9. So it's been 2 weeks.

 

[Arctucas]

So, when you first applied the Conductonaut to the die, you had idle temperatures of 33°-35°C? At what ambient?

 

[Januka.OC]

I have the H110iGTX , if you still feel uncertain, i could do it on mine, record it, & upload the video so you could watch the full process. If you dont feel confident.

My daughter is leaving in 1&1/2 hours, i could do it then

Oky Please do that video thanks I'll waiting for it

 

[jboydgolfer]

I do that last month bro i have done this things

I have Re Delied and apply TGC
Die and IHS
before i apply i clean everything untill i see it 100% clean.

I use Neil polish, Isopropyl alcohol, Arcticlean kit so i know i clean very well.

Then i have applied new thermal everything is fine back then. Not it's not been months its beed 20 days or 30 days let me check woow it's not last month i do that in this month Aprail 9. So it's been 2 weeks.

i understand you have done it recently, its not the point though. When You are experiencing high CPU temps, that cannot be attributed to a program, or lack of airflow, your option are limited to the standard troubleshooting tactics used since PC's were custom built. The first stpes, you have gone through, if the matter persists still, your next step is to verify proper contact between the CPU and its cooler. The only way to properly do that is to remove, and reinstall the CPU block.

Oky Please do that video thanks I'll waiting

i can in 90 minutes.

 

[Januka.OC]

So, when you first applied the Conductonaut to the die, you had idle temperatures of 33°-35°C? At what ambient?

I can't find ambient temperatures cause i don't have any meter but my room not hoot i can feel it. Those day raining sonits little cool that i can say.

 

[jboydgolfer]

I can't find ambient temperatures cause i don't have any meter but my room not hoot i can feel it. Those day raining sonits little cool that i can say.

do you have a wall mounted thermostat in your room to control heating or cooling?

if you do, they generally have temperature markings on them, if you turn the wheel, you should hear a "click" sound when the coil resches the current room temp, that will give you a rough idea of your rooms ambient temp


one of these?

 

[Arctucas]

An estimate of the ambient is OK.

Where are you located?

Also, What CPU are you using?

 

[Januka.OC]

i don't have TG Conductonaut anymore. But i have Kryonaut so if i do this i have to put Kryonaut not conductonaut so it will definitely not solved my problem

do you have a wall mounted thermostat in your room to control heating or cooling?

I don't have that bro

An estimate of the ambient is OK.

Where are you located?

Also, What CPU are you using?

CPU is Intel Core i7 7700k 4.5GHz.

 

[jboydgolfer]

I don't have that bro

Do you have regular TIM (thermal paste)? Not liquid metal, just regular paste? Personally I wouldn't recommend putting liquid metal between the top of your IHS and a CPU block. Something like

if you have ever bought an AIR cpu cooler, it likely came in a small tube with the cooler. AIO coolers generally have it preinstalled.

 

[Arctucas]

7700K.

All BIOS settings at default? In others words, nothing is overclocked?

 

[Januka.OC]

7700K.

All BIOS settings at default? In others words, nothing is overclocked?

All BIOS Default but
i have undervolt
Offset - 0.090mv

 

[jboydgolfer]

@Januka.OC

please run MSI afterburner for about 5 minutes, and run the Monitoring tool, be sure it is monitoring CPU usage, and CPU temps, and take a screensnip, and upload it please.

it would look like this.

 

[Januka.OC]

Do you have regular TIM (thermal paste)? Not liquid metal, just regular paste?

I have Thermal Grizzly Kryonaut
I have used it to my GPU and i have Overclock it to
GPU Clock 1480Mhz (def 1291Mhz)
Memory clock 7700Mhz (Def 7010Mhz)

and temp above 60 it stay 58c


And i thought the same Liquid metal maybe not good for IHS and Cooler. O think that's why this happening.

Oky i do that wait give me time..

 

[jboydgolfer]

I have Thermal Grizzly Kryonaut

that is thermal paste, it will be fine.

did put that under your IHS when you delidded it? thats not the same as Conductonaut.
it would be safe, but it wouldnt be as "worth the delidding" as Liquid metal.

 

[Januka.OC]

I just turned on my pc see here here told you BIOS Temps is very low...

 

[jboydgolfer]

I just turned on my pc see here here told you BIOS Temps is very low...

Normally bios temps are higher than idle windows temps.

Please upload that screen shot of cpu temps & activity now so we can see the correlation of cpu load & temp

 

[Januka.OC]

Here here again... I told you i have idle like 33c now i have 31c
I don't know what happens if i run Realbench. See coler fans its runs at 660RPM

 

[jboydgolfer]

Here here again... I told you i have idle like 33c now i have 31c
I don't know what happens if i run Realbench. See coler fans its runs at 660RPM

those temps are fine bud. problem solved

theyre just like mine.

 

[eidairaman1]

those temps are fine bud. problem solved

theyre just like mine.

View attachment 100123

I concur, im on air, overclocked to max, my idle temps are 43, ramps to 50-60, different cpu though.

 

[Arctucas]

Here here again... I told you i have idle like 33c now i have 31c
I don't know what happens if i run Realbench. See coler fans its runs at 660RPM

You reseated the cooler?

 

[jboydgolfer]

there is nothing to worry about here. the problem is solved. those temps are Very respectable.

 

[Januka.OC]

I just run Realbench and those are the results.
I do something,
I have loose the screws one by one
and re tight it one by one.

After Realbench done cpu back to normal what i don't understand bro it's like this pc alive i mean something it show me hot sometimes cooler...

 

[jboydgolfer]

I just run Realbench and those are the results.
I do something,
I have loose the screws one by one
and re tight it one by one.

After Realbench done cpu back to normal what i don't understand bro it's like this pc alive i mean something it show me hot sometimes cooler...

thats good, then the issue is resolved. 53c Max is a good temp.

Glad it worked out, im off to make breakfast.

 

[Januka.OC]

I run Realbench last time when i open this post Average temp like 65C max temp 72c mini temp 42c

Now it's fine I think i reset bios to old version i don't know what fixes it

 

[eidairaman1]

I just run Realbench and those are the results.
I do something,
I have loose the screws one by one
and re tight it one by one.

After Realbench done cpu back to normal what i don't understand bro it's like this pc alive i mean something it show me hot sometimes cooler...

You are fine, stop mucking with it