E2220

[h3llb3nd4]

What the heck!!!This is what I did, Refused to post...
Stock: 200mhz fsb
800mhz ram
1.9v cpu core
2.0v ram
OC: 220mhz
880mhz
2.0v cpu
2.2v ram

 

[RadeonX2]

2.0v for the CPU? that's toasty :shadedshu

 

[h3llb3nd4]

O sorry on that, It DID post but black screened when It reached the boot selection screen

 

[Jakl]

You set your CPU voltage to 2.0v !?!?!?!? You SHOULD NOT go over 1.5v , not even a.145v you shouldnt go over.. I have never seen anything go higher than 1.7v and thats under LN2

Reset your setting back to default before you destroy your computer

 

[h3llb3nd4]

it was idling at 1.9 when I left it on auto

 

[3870x2]

holy sh1t, anything above 1.5 will fry it, anything above 1.9 will disintegrate it. You might have already fried it. Make sure it doesnt blow up or catch on fire.

 

[TRIPTEX_CAN]

1.9? are you sure it wasnt actually 1.19 or 1.09?

 

[h3llb3nd4]

K rechecking on cpu-z

 

[3870x2]

1.9? are you sure it wasnt actually 1.19 or 1.09?

sounds right. No mobo I've ever had let me go that high.

 

[h3llb3nd4]

OMFG, need physical memory dump....well at least my proccey still works...

 

[TRIPTEX_CAN]

sounds right. No mobo I've ever had let me go that high.

yeah.. lol and if his board did go that high it would be dead already.

 

[mrhuggles]

what all motherboards can set 2.0v anyways? it was probably 1.29v or something, my VID is like... 1.2375v hehe i make that mistake all the time btw.

e2140, pretty ok overclocker, hitting 100% overclock with 1.4250v

 

[h3llb3nd4]

When I say physical I mean Physically on myself.

 

[sapetto]

My E2180 @ 2500mhz
Core Voltage 1.296
So your E2220 cant idle at 1.9

 

[mrhuggles]

dude at 2500mhz you can probably lower the voltage by a whole lot.

 

[h3llb3nd4]

My E2180 @ 2500mhz
Core Voltage 1.296
So your E2220 cant idle at 1.9

whats the speed of your ram?,Latencies, etc

 

[h3llb3nd4]

K I must have gotten the voltages messed up when I was typing this...
stock: 1.19
OCed: 1.2

 

[sapetto]

My MB isn't good for OC, it doesn't have cpu voltage setting in bios, so i can do that for now. Maybe waiting for Core i5

 

[TRIPTEX_CAN]

Ok that makes sense. now we can work out a nice OC.

Do you have an OC target? You should keep in mind that the stock cooling wont get you far.

 

[h3llb3nd4]

@sapetto thanx for the info
@Trip no target...anything that will make my proccy go past 2.6ghz

specs
multi 12x
2.4ghz

 

[silkstone]

Got mine to run stable @3.4ghz 1.55v 24/7 heat wasn;t really an issue. lapped cpu and crappy air cooler

 

[mrhuggles]

CPU: 3.2ghz 1.4250v
FSB: 400mhz
RAM: 800mhz 1:1 ratio 5-5-5-18 2T

CPU
26.54GIPS 19.33GFLOPS
8.29MIPS/MHZ 6.03MFLOPS/mhz

RAM
88ns
int: 7.06gb/sec float:7.02gb/sec

 

[h3llb3nd4]

silk what cooler you have? and what ram?

 

[h3llb3nd4]

anyway, my multiplier is stuck at 12 and fsb is on 200...whenever I pull the fsb up, the mem clock also goes up, can you unlink them and how?

 

[3dsage]

You cant drop the multi on the ram? Loosen the timings up.
I bet they cant handle that overclock from 800 to 880, try the 667 divider or something like that.