DrOctopus
New Member
- Joined
- Apr 7, 2009
- Messages
- 81 (0.01/day)
- Location
- Melbourne, Australia
System Name | LL-Q08 |
---|---|
Processor | i7 860 |
Motherboard | Gigabyte P55 ITX |
Cooling | H50 |
Memory | 4gb 2000mhz Kingston HyperX |
Video Card(s) | Sapphire 5870 |
Storage | 40GB Intel SSD, 1tb WD Black, 2TB Seagate |
Display(s) | 3x 22" BenQ |
Case | Lian Li Q08 |
Audio Device(s) | Onboard |
Power Supply | Seasonic 430W Fanless |
Software | 7 64bit Ulti |
Hey guys, so heres what happened. Ive put everything together apart from the hard drives which have not arrived yet, hence no os installed. however, i decided to check that all the temps were O.K and that all the hardware was being registered in the bios.
I plugged the comp into my mon, it registered my e8500 and said 333 x 9.5 : 3.16
Then when into bios to check the temps,went to system mon, it was at 45 on start up with my triton 81 installed, went into fan control and changed to manual 100%.
Then next time it posts it states e8500 but says 333 x 9 : 3.0
i now cant change the multiplier. Its locked like a e8400 at 9x
I may be a bit of a noob but how the hell did i manage to do that by changing fan speed?
I plugged the comp into my mon, it registered my e8500 and said 333 x 9.5 : 3.16
Then when into bios to check the temps,went to system mon, it was at 45 on start up with my triton 81 installed, went into fan control and changed to manual 100%.
Then next time it posts it states e8500 but says 333 x 9 : 3.0
i now cant change the multiplier. Its locked like a e8400 at 9x
I may be a bit of a noob but how the hell did i manage to do that by changing fan speed?