• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

*** F@H Tech Assistance Thread ***

Joined
Jul 2, 2008
Messages
6,375 (1.83/day)
Likes
8,454
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
TPF=Time Per Frame
Do you have a Passkey?
Also, you have to finish 10 SMP WU's before the bonus kicks in. You don't want to do bigadv WU's for those first 10.
I think you are just doing a SMP WU. (5 hour eta)
 
Joined
Dec 18, 2009
Messages
2,406 (0.81/day)
Likes
2,460
Location
London, UK
System Name Slick
Processor Intel i5 2467M
Motherboard Samsung Series 5 Ultrabook
Memory 8GB Corsair Value
Storage Crucial M4 7mm 256GB
Display(s) 13"
Software Windows 8 Pro x64
Should have clarified it was first time with SMP and 8 cores. Back when I started I was under the impression you had to do something complicated with VMWare images to be able to do more than 4 cores.

I think I might have done 10WU in the past with SMP and my passkey from last year. Any way to find out?

EDIT: OK, just found out all I had to do was enter my username and passkey into donor stats search of the F@H site. Seems I requested 2 passkeys from 2 different email addresses. The one from last year has 23completed SMP WU.

Seems also that the way this V7 client is setup, it forces you to do a SMP before downloading bigadv as the next WU.
 
Last edited:
Joined
Jan 31, 2010
Messages
2,471 (0.85/day)
Likes
782
System Name Xtreme PC's AMDx8
Processor AMD FX8320 @ 4.0GHz NB/HT @ 2.6GHz
Motherboard Asus Crosshair V Formula
Cooling ThermoLab Baram 2x 120mm Gentle Typhoons 1850rpm
Memory 8GB (2x4GB) Mushkin Blackline DDR3 2400MHz 11/13/13/34/1T 1.65V
Video Card(s) Sapphire Nitro+ RX580 8GB OC 1342/2000 (Core/Mem) BIOS Modded
Storage 2x Kingston V300 120GB SSD's Raid0: 1x Sandisk 128GB SSD 1xWD 2TB red, 1xWD 1TB black 1xWD 2TB nas
Display(s) ViewSonic VX2457 75Hz FreeSync 1920x1080p
Case SilverStone Raven RV02B-W + 3x SS AP181 + USB3.0 upgrade
Audio Device(s) Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp Technics Speaker set
Power Supply SilverStone ST75F-P Modular 750W
Mouse Logitech G402 Hyperion Fury
Keyboard Logitech G105
Software Windows 10 X64 PRO (build 1607)
Benchmark Scores it sucks even less much now ;)
yup looks pretty good from here Kiex and TPF = Time Per Frame, each WU gets divided into x frames for your CPU or GPU to work on. F@H then calculates TPF so it knows roughly how long your CPU/GPU will take to finish the WU ie: ETA
 
Joined
Dec 18, 2009
Messages
2,406 (0.81/day)
Likes
2,460
Location
London, UK
System Name Slick
Processor Intel i5 2467M
Motherboard Samsung Series 5 Ultrabook
Memory 8GB Corsair Value
Storage Crucial M4 7mm 256GB
Display(s) 13"
Software Windows 8 Pro x64
yup looks pretty good from here Kiex and TPF = Time Per Frame, each WU gets divided into x frames for your CPU or GPU to work on. F@H then calculates TPF so it knows roughly how long your CPU/GPU will take to finish the WU ie: ETA
Thanks, makes a lot more sense now. Think I finally got to grips with this bigadv stuff now.

First one is running now, a 2684 WU with TPF 38min. Going to take 2 days to complete.. damn it's a big WU!
 
Joined
Jul 2, 2008
Messages
6,375 (1.83/day)
Likes
8,454
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit

4x4n

Xtreme Refugee
Joined
Apr 2, 2009
Messages
488 (0.15/day)
Likes
641
Location
Seattle
Processor 5930k
Motherboard Asus X99-Deluxe
Cooling Custom water
Memory 4x4gb Corsair Dominator 3000
Video Card(s) GTX 750 Ti
Storage Samsung Evo 500gb
Display(s) Asus 24"
Case Fractal Design Arc XL
Power Supply Seasonic 650
Started folding with my GTS450 in another rig today. Running 267.59 drivers, and all I get is a failed unit after about a minute. This card is running 100% stock settings, and I have tried the latest 270.61 drivers also. Any ideas whats going on?

EDIT: added log.

Code:
16:08:12:          PID: 3560
16:08:12:          CWD: C:/ProgramData/FAHData
16:08:12:Win32 Service: false
16:08:12:***********************************************************************
16:08:12:<config>
16:08:12:  <!-- Folding Slot Configuration -->
16:08:12:  <gpu v='true'/>
16:08:12:
16:08:12:  <!-- User Information -->
16:08:12:  <passkey v='********************************'/>
16:08:12:  <team v='50711'/>
16:08:12:  <user v='4x4n'/>
16:08:12:
16:08:12:  <!-- Folding Slots -->
16:08:12:</config>
16:08:12:Trying to access database...
16:08:12:Database locked
16:08:12:Enabled folding slot 00: READY gpu:0:"GF106 [GeForce 450 GTS]"
16:08:12:Connecting to assign-GPU.stanford.edu:80
16:08:12:News: Welcome to Folding@Home
16:08:12:Assigned to work server 171.64.65.64
16:08:12:Requesting new work unit for slot 00: READY gpu:0:"GF106 [GeForce 450 GTS]" from 171.64.65.64
16:08:12:Connecting to 171.64.65.64:8080
16:08:12:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
16:08:12:Slot 00: Downloading 43.68KiB
16:08:12:Slot 00: Download complete
16:08:12:Received Unit: id:00 state:DOWNLOAD project:6806 run:5261 clone:0 gen:17 core:0x15 unit:0x000000110a3b1e644d94c5c10c107259
16:08:12:Starting Unit 00
16:08:12:Running core: C:/ProgramData/FAHData/cores/www.stanford.edu/~pande/Win32/x86/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -lifeline 3560 -version 701 -checkpoint 15 -gpu 0
16:08:12:Started core on PID 2784
16:08:12:FahCore 0x15 started
16:08:13:Unit 00:
16:08:13:Unit 00:*------------------------------*
16:08:13:Unit 00:Folding@Home GPU Core
16:08:13:Unit 00:Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
16:08:13:Unit 00:
16:08:13:Unit 00:Build host: SimbiosNvdWin7
16:08:13:Unit 00:Board Type: NVIDIA/CUDA
16:08:13:Unit 00:Core      : x=15
16:08:13:Unit 00: Window's signal control handler registered.
16:08:13:Unit 00:Preparing to commence simulation
16:08:13:Unit 00:- Looking at optimizations...
16:08:13:Unit 00:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
16:08:13:Unit 00:- Created dyn
16:08:13:Unit 00:- Files status OK
16:08:13:Unit 00:sizeof(CORE_PACKET_HDR) = 512 file=<>
16:08:13:Unit 00:- Expanded 44214 -> 172159 (decompressed 389.3 percent)
16:08:13:Unit 00:Called DecompressByteArray: compressed_data_size=44214 data_size=172159, decompressed_data_size=172159 diff=0
16:08:13:Unit 00:- Digital signature verified
16:08:13:Unit 00:
16:08:13:Unit 00:Project: 6806 (Run 5261, Clone 0, Gen 17)
16:08:13:Unit 00:
16:08:13:Unit 00:Assembly optimizations on if available.
16:08:13:Unit 00:Entering M.D.
16:08:15:Unit 00:Tpr hash 00/wudata_01.tpr:  1008431989 930440720 1798603369 2932190372 2926891746
16:08:15:Unit 00:Working on 2 PEPTIDE (1-42)
16:08:15:Unit 00:Client config unavailable.
16:08:15:Unit 00:Starting GUI Server
16:08:15:Unit 00:Finished fah_main
16:08:15:Unit 00:
16:08:15:Unit 00:Successful run
16:08:15:Unit 00:DynamicWrapper: Finished Work Unit: sleep=10000
16:08:25:Unit 00:Reserved 0 bytes for xtc file; Cosm status=0
16:08:25:Unit 00:Reserved 0 0 786430464 bytes for arc file=<00/wudata_01.trr> Cosm status=0
16:08:25:Unit 00:Allocated 0 bytes for edr file
16:08:25:Unit 00:Error: could not open bedfile, but going on anyway
16:08:25:Unit 00:- Checksum of file (00/wudata_01.edr) read from disk doesn't match
16:08:25:Unit 00:edrfile file hash check failed.
16:08:25:Unit 00:
16:08:25:Unit 00:Folding@home Core Shutdown: FILE_IO_ERROR
16:08:25:FahCore, running Unit 00, returned: FILE_IO_ERROR (117)
16:08:25:WARNING: Unit 00 Fatal error, dumping
16:08:25:Sending unit results: id:00 state:SEND project:6806 run:5261 clone:0 gen:17 core:0x15 unit:0x000000110a3b1e644d94c5c10c107259
16:08:25:Connecting to 171.64.65.64:8080
16:08:25:Server responded WORK_ACK (400)
16:08:26:Cleaning up Unit 00
16:08:27:Connecting to assign-GPU.stanford.edu:80
16:08:27:News: Welcome to Folding@Home
16:08:27:Assigned to work server 171.64.65.64
16:08:27:Requesting new work unit for slot 00: READY gpu:0:"GF106 [GeForce 450 GTS]" from 171.64.65.64
16:08:27:Connecting to 171.64.65.64:8080
16:08:27:Slot 00: Downloading 41.50KiB
16:08:27:Slot 00: Download complete
16:08:27:Received Unit: id:01 state:DOWNLOAD project:6805 run:5160 clone:3 gen:12 core:0x15 unit:0x0000000c0a3b1e644d8d2f3b8a9b0fa4
16:08:27:Starting Unit 01
16:08:27:Running core: C:/ProgramData/FAHData/cores/www.stanford.edu/~pande/Win32/x86/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -lifeline 3560 -version 701 -checkpoint 15 -gpu 0
16:08:27:Started core on PID 1296
16:08:27:FahCore 0x15 started
16:08:28:Unit 01:
16:08:28:Unit 01:*------------------------------*
16:08:28:Unit 01:Folding@Home GPU Core
16:08:28:Unit 01:Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
16:08:28:Unit 01:
16:08:28:Unit 01:Build host: SimbiosNvdWin7
16:08:28:Unit 01:Board Type: NVIDIA/CUDA
16:08:28:Unit 01:Core      : x=15
16:08:28:Unit 01: Window's signal control handler registered.
16:08:28:Unit 01:Preparing to commence simulation
16:08:28:Unit 01:- Looking at optimizations...
16:08:28:Unit 01:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
16:08:28:Unit 01:- Created dyn
16:08:28:Unit 01:- Files status OK
16:08:28:Unit 01:sizeof(CORE_PACKET_HDR) = 512 file=<>
16:08:28:Unit 01:- Expanded 41986 -> 162639 (decompressed 387.3 percent)
16:08:28:Unit 01:Called DecompressByteArray: compressed_data_size=41986 data_size=162639, decompressed_data_size=162639 diff=0
16:08:28:Unit 01:- Digital signature verified
16:08:28:Unit 01:
16:08:28:Unit 01:Project: 6805 (Run 5160, Clone 3, Gen 12)
16:08:28:Unit 01:
16:08:28:Unit 01:Assembly optimizations on if available.
16:08:28:Unit 01:Entering M.D.
16:08:29:Unit 01:Tpr hash 01/wudata_01.tpr:  2986312225 1880647900 4199440510 3773863553 2779174108
16:08:29:Unit 01:Working on ALZHEIMER'S DISEASE AMYLOID
16:08:29:Unit 01:Client config unavailable.
16:08:30:Unit 01:Starting GUI Server
16:08:30:Unit 01:Finished fah_main
16:08:30:Unit 01:
16:08:30:Unit 01:Successful run
16:08:30:Unit 01:DynamicWrapper: Finished Work Unit: sleep=10000
16:08:40:FahCore, running Unit 01, returned: FILE_IO_ERROR (117)
16:08:40:WARNING: Unit 01 Fatal error, dumping
16:08:40:Sending unit results: id:01 state:SEND project:6805 run:5160 clone:3 gen:12 core:0x15 unit:0x0000000c0a3b1e644d8d2f3b8a9b0fa4
16:08:40:Connecting to 171.64.65.64:8080
16:08:40:Connecting to assign-GPU.stanford.edu:80
16:08:40:Server responded WORK_ACK (400)
16:08:40:Cleaning up Unit 01
16:08:40:News: Welcome to Folding@Home
16:08:40:Assigned to work server 171.64.65.64
16:08:40:Requesting new work unit for slot 00: READY gpu:0:"GF106 [GeForce 450 GTS]" from 171.64.65.64
16:08:40:Connecting to 171.64.65.64:8080
16:08:41:Slot 00: Downloading 40.91KiB
16:08:41:Slot 00: Download complete
16:08:41:Received Unit: id:00 state:DOWNLOAD project:6805 run:5161 clone:3 gen:12 core:0x15 unit:0x0000000c0a3b1e644d8d2f3caf824ea5
16:08:41:Starting Unit 00
16:08:41:Running core: C:/ProgramData/FAHData/cores/www.stanford.edu/~pande/Win32/x86/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -lifeline 3560 -version 701 -checkpoint 15 -gpu 0
16:08:41:Started core on PID 3880
16:08:41:FahCore 0x15 started
16:08:41:Unit 00:
16:08:41:Unit 00:*------------------------------*
16:08:41:Unit 00:Folding@Home GPU Core
16:08:41:Unit 00:Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
16:08:41:Unit 00:
16:08:41:Unit 00:Build host: SimbiosNvdWin7
16:08:41:Unit 00:Board Type: NVIDIA/CUDA
16:08:41:Unit 00:Core      : x=15
16:08:41:Unit 00: Window's signal control handler registered.
16:08:41:Unit 00:Preparing to commence simulation
16:08:41:Unit 00:- Looking at optimizations...
16:08:41:Unit 00:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
16:08:41:Unit 00:- Created dyn
16:08:41:Unit 00:- Files status OK
16:08:41:Unit 00:sizeof(CORE_PACKET_HDR) = 512 file=<>
16:08:41:Unit 00:- Expanded 41383 -> 162639 (decompressed 393.0 percent)
16:08:41:Unit 00:Called DecompressByteArray: compressed_data_size=41383 data_size=162639, decompressed_data_size=162639 diff=0
16:08:41:Unit 00:- Digital signature verified
16:08:41:Unit 00:
16:08:41:Unit 00:Project: 6805 (Run 5161, Clone 3, Gen 12)
16:08:41:Unit 00:
16:08:41:Unit 00:Assembly optimizations on if available.
16:08:41:Unit 00:Entering M.D.
16:08:43:Unit 00:Tpr hash 00/wudata_01.tpr:  2503901873 2367888248 835013042 2768515516 4066922963
16:08:43:Unit 00:Working on ALZHEIMER'S DISEASE AMYLOID
16:08:43:Unit 00:Client config unavailable.
16:08:43:Unit 00:Starting GUI Server
16:08:43:Unit 00:Finished fah_main
16:08:43:Unit 00:
16:08:43:Unit 00:Successful run
16:08:43:Unit 00:DynamicWrapper: Finished Work Unit: sleep=10000
16:08:53:Unit 00:Reserved 0 bytes for xtc file; Cosm status=0
16:08:53:Unit 00:Reserved 0 0 786430464 bytes for arc file=<00/wudata_01.trr> Cosm status=0
16:08:53:Unit 00:Allocated 0 bytes for edr file
16:08:53:Unit 00:Error: could not open bedfile, but going on anyway
16:08:53:Unit 00:- Checksum of file (00/wudata_01.edr) read from disk doesn't match
16:08:53:Unit 00:edrfile file hash check failed.
16:08:53:Unit 00:
16:08:53:Unit 00:Folding@home Core Shutdown: FILE_IO_ERROR
16:08:54:FahCore, running Unit 00, returned: FILE_IO_ERROR (117)
16:08:54:WARNING: Unit 00 Fatal error, dumping
16:08:54:Sending unit results: id:00 state:SEND project:6805 run:5161 clone:3 gen:12 core:0x15 unit:0x0000000c0a3b1e644d8d2f3caf824ea5
16:08:54:Connecting to 171.64.65.64:8080
16:08:54:Connecting to assign-GPU.stanford.edu:80
16:08:54:News: Welcome to Folding@Home
16:08:54:Assigned to work server 171.64.65.64
16:08:54:Requesting new work unit for slot 00: READY gpu:0:"GF106 [GeForce 450 GTS]" from 171.64.65.64
16:08:54:Connecting to 171.64.65.64:8080
16:08:54:Server responded WORK_ACK (400)
16:08:54:Cleaning up Unit 00
16:08:54:Slot 00: Downloading 43.36KiB
16:08:54:Slot 00: Download complete
16:08:54:Received Unit: id:01 state:DOWNLOAD project:6806 run:5267 clone:0 gen:17 core:0x15 unit:0x000000110a3b1e644d94c5c4424cfce4
16:08:54:Starting Unit 01
16:08:54:Running core: C:/ProgramData/FAHData/cores/www.stanford.edu/~pande/Win32/x86/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -lifeline 3560 -version 701 -checkpoint 15 -gpu 0
16:08:54:Started core on PID 3520
16:08:54:FahCore 0x15 started
16:08:55:Unit 01:
16:08:55:Unit 01:*------------------------------*
16:08:55:Unit 01:Folding@Home GPU Core
16:08:55:Unit 01:Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
16:08:55:Unit 01:
16:08:55:Unit 01:Build host: SimbiosNvdWin7
16:08:55:Unit 01:Board Type: NVIDIA/CUDA
16:08:55:Unit 01:Core      : x=15
16:08:55:Unit 01: Window's signal control handler registered.
16:08:55:Unit 01:Preparing to commence simulation
16:08:55:Unit 01:- Looking at optimizations...
16:08:55:Unit 01:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
16:08:55:Unit 01:- Created dyn
16:08:55:Unit 01:- Files status OK
16:08:55:Unit 01:sizeof(CORE_PACKET_HDR) = 512 file=<>
16:08:55:Unit 01:- Expanded 43892 -> 172159 (decompressed 392.2 percent)
16:08:55:Unit 01:Called DecompressByteArray: compressed_data_size=43892 data_size=172159, decompressed_data_size=172159 diff=0
16:08:55:Unit 01:- Digital signature verified
16:08:55:Unit 01:
16:08:55:Unit 01:Project: 6806 (Run 5267, Clone 0, Gen 17)
16:08:55:Unit 01:
16:08:55:Unit 01:Assembly optimizations on if available.
16:08:55:Unit 01:Entering M.D.
16:08:57:Unit 01:Tpr hash 01/wudata_01.tpr:  3243589585 353048341 890071933 3334118657 3245111031
16:08:57:Unit 01:Working on 2 PEPTIDE (1-42)
16:08:57:Unit 01:Client config unavailable.
16:08:57:Unit 01:Starting GUI Server
16:08:57:Unit 01:Finished fah_main
16:08:57:Unit 01:
16:08:57:Unit 01:Successful run
16:08:57:Unit 01:DynamicWrapper: Finished Work Unit: sleep=10000
16:09:07:FahCore, running Unit 01, returned: FILE_IO_ERROR (117)
16:09:07:WARNING: Unit 01 Fatal error, dumping
16:09:07:Sending unit results: id:01 state:SEND project:6806 run:5267 clone:0 gen:17 core:0x15 unit:0x000000110a3b1e644d94c5c4424cfce4
16:09:07:Connecting to 171.64.65.64:8080
16:09:07:Server responded WORK_ACK (400)
16:09:07:Cleaning up Unit 01
16:09:08:Connecting to assign-GPU.stanford.edu:80
16:09:08:News: Welcome to Folding@Home
16:09:08:Assigned to work server 171.64.65.64
16:09:08:Requesting new work unit for slot 00: READY gpu:0:"GF106 [GeForce 450 GTS]" from 171.64.65.64
16:09:08:Connecting to 171.64.65.64:8080
16:09:08:Slot 00: Downloading 43.19KiB
16:09:08:Slot 00: Download complete
16:09:08:Received Unit: id:00 state:DOWNLOAD project:6806 run:5268 clone:0 gen:17 core:0x15 unit:0x000000110a3b1e644d94c5c46c9a17fd
16:09:08:Starting Unit 00
16:09:08:Running core: C:/ProgramData/FAHData/cores/www.stanford.edu/~pande/Win32/x86/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -lifeline 3560 -version 701 -checkpoint 15 -gpu 0
16:09:08:Started core on PID 2252
16:09:08:FahCore 0x15 started
16:09:09:Unit 00:
16:09:09:Unit 00:*------------------------------*
16:09:09:Unit 00:Folding@Home GPU Core
16:09:09:Unit 00:Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
16:09:09:Unit 00:
16:09:09:Unit 00:Build host: SimbiosNvdWin7
16:09:09:Unit 00:Board Type: NVIDIA/CUDA
16:09:09:Unit 00:Core      : x=15
16:09:09:Unit 00: Window's signal control handler registered.
16:09:09:Unit 00:Preparing to commence simulation
16:09:09:Unit 00:- Looking at optimizations...
16:09:09:Unit 00:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
16:09:09:Unit 00:- Created dyn
16:09:09:Unit 00:- Files status OK
16:09:09:Unit 00:sizeof(CORE_PACKET_HDR) = 512 file=<>
16:09:09:Unit 00:- Expanded 43718 -> 172159 (decompressed 393.7 percent)
16:09:09:Unit 00:Called DecompressByteArray: compressed_data_size=43718 data_size=172159, decompressed_data_size=172159 diff=0
16:09:09:Unit 00:- Digital signature verified
16:09:09:Unit 00:
16:09:09:Unit 00:Project: 6806 (Run 5268, Clone 0, Gen 17)
16:09:09:Unit 00:
16:09:09:Unit 00:Assembly optimizations on if available.
16:09:09:Unit 00:Entering M.D.
16:09:10:Unit 00:Tpr hash 00/wudata_01.tpr:  728968900 666329813 3268116476 1173997056 1545415587
16:09:10:Unit 00:Working on 2 PEPTIDE (1-42)
16:09:10:Unit 00:Client config unavailable.
16:09:11:Unit 00:Starting GUI Server
16:09:11:Unit 00:Finished fah_main
16:09:11:Unit 00:
16:09:11:Unit 00:Successful run
16:09:11:Unit 00:DynamicWrapper: Finished Work Unit: sleep=10000
16:09:21:Unit 00:Reserved 0 bytes for xtc file; Cosm status=0
16:09:21:Unit 00:Reserved 0 0 786430464 bytes for arc file=<00/wudata_01.trr> Cosm status=0
16:09:21:Unit 00:Allocated 0 bytes for edr file
16:09:21:Unit 00:Error: could not open bedfile, but going on anyway
16:09:21:Unit 00:- Checksum of file (00/wudata_01.edr) read from disk doesn't match
16:09:21:Unit 00:edrfile file hash check failed.
16:09:21:Unit 00:
16:09:21:Unit 00:Folding@home Core Shutdown: FILE_IO_ERROR
16:09:21:FahCore, running Unit 00, returned: FILE_IO_ERROR (117)
16:09:21:WARNING: Unit 00 Fatal error, dumping
16:09:21:Sending unit results: id:00 state:SEND project:6806 run:5268 clone:0 gen:17 core:0x15 unit:0x000000110a3b1e644d94c5c46c9a17fd
16:09:21:Connecting to 171.64.65.64:8080
16:09:21:Server responded WORK_ACK (400)
16:09:21:Cleaning up Unit 00
 
Last edited:
Joined
Jul 2, 2008
Messages
6,375 (1.83/day)
Likes
8,454
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
??Try running it as administrator??
 

bogmali

Moderator
Staff member
Joined
Mar 16, 2008
Messages
7,461 (2.08/day)
Likes
4,786
Location
Pacific Northwest
System Name System Has No Name
Processor Core i7-7820X
Motherboard MSI X299 Gaming Pro Carbon
Cooling Corsair H115i AIO
Memory Apacer Blade 4x8GB DDR4-3200
Video Card(s) Gigabyte AORUS GTX-1080ti
Storage Sandisk SDSSDXP 240GB SSD, Sandisk Extreme Pro 480GB SSD, Samsung 960 Pro M.2 NVMe 1TB
Display(s) Samsung UE510 UHD 28"
Case Coolermaster MasterCase H500P
Audio Device(s) Onboard
Power Supply Seasonic Prime Ultra 1K Watt
Mouse EpicGear Zora
Keyboard CM Quickfire Xti
Software Win10 Pro 64
Benchmark Scores Xbox Live Gamertag=jondonken
4X4n- "These errors indicate an I/O hardware problem or perhaps an AV program preventing FAH from writing/reading certain work files."

Try running your clients as ADMINs just like TBBB said or give it some permissions on your AV program.
 

4x4n

Xtreme Refugee
Joined
Apr 2, 2009
Messages
488 (0.15/day)
Likes
641
Location
Seattle
Processor 5930k
Motherboard Asus X99-Deluxe
Cooling Custom water
Memory 4x4gb Corsair Dominator 3000
Video Card(s) GTX 750 Ti
Storage Samsung Evo 500gb
Display(s) Asus 24"
Case Fractal Design Arc XL
Power Supply Seasonic 650
I got it worked out guys, thanks for the help. After many installs, re-installs, driver cleaners, it's working great now.
 
Joined
Sep 8, 2006
Messages
603 (0.15/day)
Likes
415
Location
Pacific N.W.
System Name SYS-1//SYS-2//SYS-3//SYS-4
Processor AMD FX-8350//AMD FX-8350//AMD X6 1090T //AMD FX-8350
Motherboard Biostar TA990FXE//Gigabyte 990FX-G//MSI 890GXM-G65//ASUS M5A99FX Pro 2.0
Cooling ZEROtherm Nirvana//Corsair H-110i//AMD PII Cooler//AMD CL Water Cooler
Memory REDLINE 1866 (4X4g)//REDLINE 2133 (4X4g)//Geil (4x2g)//AMD R9 G 2400 (4x4g)
Video Card(s) XFX R9 270 (CF)//R9 270x(CF) Devil's//XFX HD7870//R9 270X(CF) Devil's
Storage Corsair ForceIII GS-360 //Samsung 850-Pro//Samsung 840-Pro//Hyper-X Savage 480
Display(s) Samsung 214T 21.3" LCD//BENQ G2400WD 24" LCD
Case SIGMA LUNA//Corsair 650D //Silverstone SG-01//Cooler Master HAF-XB
Audio Device(s) X-FI Fatality Pro//Sound Blaster Z//Sound Blaster Z//Sound Blaster Z
Power Supply Corsair HX620W//Corsair HX850i//Corsair HX620//Corsair HX 750
Software Win 7 Ult-64//Vista Premium-64//Win 7 Ult-64//Vista Ult-64
I understand the fact that Nvidia folds better than ATI.But am curious as to how much better? Does ATI get approx 70-80% of what and Nvidia does???????Or is it much worse?
 
T

twilyth

Guest
I downloaded the most current version of F@H and I couldn't find any way to limit it to just running on my 5770. There seemed to be 4 instances of it out of 8 threads on a 2600k. I did look at the wiki for config options but putting -config after the program didn't work. Also it didn't remember my user name and team assignment.

Any assistance would be appreciated.
 

bogmali

Moderator
Staff member
Joined
Mar 16, 2008
Messages
7,461 (2.08/day)
Likes
4,786
Location
Pacific Northwest
System Name System Has No Name
Processor Core i7-7820X
Motherboard MSI X299 Gaming Pro Carbon
Cooling Corsair H115i AIO
Memory Apacer Blade 4x8GB DDR4-3200
Video Card(s) Gigabyte AORUS GTX-1080ti
Storage Sandisk SDSSDXP 240GB SSD, Sandisk Extreme Pro 480GB SSD, Samsung 960 Pro M.2 NVMe 1TB
Display(s) Samsung UE510 UHD 28"
Case Coolermaster MasterCase H500P
Audio Device(s) Onboard
Power Supply Seasonic Prime Ultra 1K Watt
Mouse EpicGear Zora
Keyboard CM Quickfire Xti
Software Win10 Pro 64
Benchmark Scores Xbox Live Gamertag=jondonken
I understand the fact that Nvidia folds better than ATI.But am curious as to how much better? Does ATI get approx 70-80% of what and Nvidia does???????Or is it much worse?
Not close to 70 or 80% but with the new V7 client, I'd say 50-60% (someone post some #'s for comparison).

I downloaded the most current version of F@H and I couldn't find any way to limit it to just running on my 5770. There seemed to be 4 instances of it out of 8 threads on a 2600k. I did look at the wiki for config options but putting -config after the program didn't work. Also it didn't remember my user name and team assignment.

Any assistance would be appreciated.
Which client did you download, the V7 or the standalone? Post some screenies my friend;)
 
Last edited:
Joined
Jan 31, 2010
Messages
2,471 (0.85/day)
Likes
782
System Name Xtreme PC's AMDx8
Processor AMD FX8320 @ 4.0GHz NB/HT @ 2.6GHz
Motherboard Asus Crosshair V Formula
Cooling ThermoLab Baram 2x 120mm Gentle Typhoons 1850rpm
Memory 8GB (2x4GB) Mushkin Blackline DDR3 2400MHz 11/13/13/34/1T 1.65V
Video Card(s) Sapphire Nitro+ RX580 8GB OC 1342/2000 (Core/Mem) BIOS Modded
Storage 2x Kingston V300 120GB SSD's Raid0: 1x Sandisk 128GB SSD 1xWD 2TB red, 1xWD 1TB black 1xWD 2TB nas
Display(s) ViewSonic VX2457 75Hz FreeSync 1920x1080p
Case SilverStone Raven RV02B-W + 3x SS AP181 + USB3.0 upgrade
Audio Device(s) Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp Technics Speaker set
Power Supply SilverStone ST75F-P Modular 750W
Mouse Logitech G402 Hyperion Fury
Keyboard Logitech G105
Software Windows 10 X64 PRO (build 1607)
Benchmark Scores it sucks even less much now ;)
both my HD5770's get roughly 6600ppd each if I don't run an SMP WU if smp is used aswell they get around 6200/6400ppd each at the moment I can do 7 WU's per day for 12845 points

opps nearly forgot.... that's with the new open beta v7.1.24 as there's still work being done on it I'd expect to see further gains in PPD for ATI/AMD GPU's

oopps nearly also forgot with core_11 gpu2 WU's I only used to get max 2500ppd each card
 
Last edited:
T

twilyth

Guest
Not close to 70 or 80% but with the new V7 client, I'd say 50-60% (someone post some #'s for comparison).



Which client did you download, the V7 or the standalone? Post some screenies my friend;)
dl'ed 6.23 - it was the first one on the download page here -http://folding.stanford.edu/English/Download

There are no screens except for the config screen (with 3 tabs) which tells virtually nothing.
 

bogmali

Moderator
Staff member
Joined
Mar 16, 2008
Messages
7,461 (2.08/day)
Likes
4,786
Location
Pacific Northwest
System Name System Has No Name
Processor Core i7-7820X
Motherboard MSI X299 Gaming Pro Carbon
Cooling Corsair H115i AIO
Memory Apacer Blade 4x8GB DDR4-3200
Video Card(s) Gigabyte AORUS GTX-1080ti
Storage Sandisk SDSSDXP 240GB SSD, Sandisk Extreme Pro 480GB SSD, Samsung 960 Pro M.2 NVMe 1TB
Display(s) Samsung UE510 UHD 28"
Case Coolermaster MasterCase H500P
Audio Device(s) Onboard
Power Supply Seasonic Prime Ultra 1K Watt
Mouse EpicGear Zora
Keyboard CM Quickfire Xti
Software Win10 Pro 64
Benchmark Scores Xbox Live Gamertag=jondonken
dl'ed 6.23 - it was the first one on the download page here -http://folding.stanford.edu/English/Download

There are no screens except for the config screen (with 3 tabs) which tells virtually nothing.
Here:

http://www.techpowerup.com/forums/showpost.php?p=2257743&postcount=1514

Download it and follow the hyperlinked tutorial. Since you have a 5XXX series card, you can take advantage of the most recent optimization for ATI/AMD cards. Scroll all the way down on the tutorial to where it starts talking about the beta 5 series ATI/AMD card work units.

You can also reconfigure that client later on if you decide to add your CPU for some SMP goodness;)
 
T

twilyth

Guest
Here:

http://www.techpowerup.com/forums/showpost.php?p=2257743&postcount=1514

Download it and follow the hyperlinked tutorial. Since you have a 5XXX series card, you can take advantage of the most recent optimization for ATI/AMD cards. Scroll all the way down on the tutorial to where it starts talking about the beta 5 series ATI/AMD card work units.

You can also reconfigure that client later on if you decide to add your CPU for some SMP goodness;)
OK, I installed the client and set the preferred mode to GPU and I only see one instance running. The client view program is just a dos window though. I guess there is a list of instructions somewhere for controlling it?

I'll install the monitor software later after I reboot. Right now I've got 2 instances of the console and the client window won't close.

How come no tray icon? Which program do you use to control the client?

Thanks.
 

bogmali

Moderator
Staff member
Joined
Mar 16, 2008
Messages
7,461 (2.08/day)
Likes
4,786
Location
Pacific Northwest
System Name System Has No Name
Processor Core i7-7820X
Motherboard MSI X299 Gaming Pro Carbon
Cooling Corsair H115i AIO
Memory Apacer Blade 4x8GB DDR4-3200
Video Card(s) Gigabyte AORUS GTX-1080ti
Storage Sandisk SDSSDXP 240GB SSD, Sandisk Extreme Pro 480GB SSD, Samsung 960 Pro M.2 NVMe 1TB
Display(s) Samsung UE510 UHD 28"
Case Coolermaster MasterCase H500P
Audio Device(s) Onboard
Power Supply Seasonic Prime Ultra 1K Watt
Mouse EpicGear Zora
Keyboard CM Quickfire Xti
Software Win10 Pro 64
Benchmark Scores Xbox Live Gamertag=jondonken
Joined
Jul 25, 2008
Messages
2,879 (0.83/day)
Likes
1,817
Location
South of Planet Earth
System Name SLOW-MO-SHUN II
Processor AMD RYZEN 5 1600X 6-Core 3.6GHz
Motherboard ASRock AB350 Pro4
Cooling AMD stock cooler, 6 case fans
Memory 16GB (2 x 8GB) 288-Pin DDR4 2400MHz Dual Channel
Video Card(s) NVidia GeForce GTX1060 6GB
Storage SEAGATE 1TB 7200 RPM 64MB ------SAMSUNG 250GB Solid State Drive SATA III
Display(s) Asus 24" widescreen 1080p
Case Corsair Carbide Series 200R Black Steel
Audio Device(s) Onboard
Power Supply SEASONIC 620 W E/P
Software Windows 10 Home 64-Bit
I want to get my 2x 6950's folding for the CC. Do I need a dummy plug or was that just a Vista deal? Can I keep my cards in xfire? What program should I run?

Thanks
:respect:
 
Joined
Jul 2, 2008
Messages
6,375 (1.83/day)
Likes
8,454
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
I want to get my 2x 6950's folding for the CC. Do I need a dummy plug or was that just a Vista deal? Can I keep my cards in xfire? What program should I run?

Thanks
:respect:
Well...,

First, thanks for trying this now, instead of when CC has started.

You will want to use the new V7 Client. Use the link in Bog's post (post 1542) to install it and make sure you select advmethods to make it use the new core16. I for one am anxious to hear how V7 handles two ATI cards. Xfire has always needed to be disabled for Folding before but I don't know with V7. Please let us know. Might I suggest you also read through http://www.techpowerup.com/forums/showthread.php?t=143124 . Some of those links are older...
Dummy plugs? I sure hope not.
 
Joined
Jan 31, 2010
Messages
2,471 (0.85/day)
Likes
782
System Name Xtreme PC's AMDx8
Processor AMD FX8320 @ 4.0GHz NB/HT @ 2.6GHz
Motherboard Asus Crosshair V Formula
Cooling ThermoLab Baram 2x 120mm Gentle Typhoons 1850rpm
Memory 8GB (2x4GB) Mushkin Blackline DDR3 2400MHz 11/13/13/34/1T 1.65V
Video Card(s) Sapphire Nitro+ RX580 8GB OC 1342/2000 (Core/Mem) BIOS Modded
Storage 2x Kingston V300 120GB SSD's Raid0: 1x Sandisk 128GB SSD 1xWD 2TB red, 1xWD 1TB black 1xWD 2TB nas
Display(s) ViewSonic VX2457 75Hz FreeSync 1920x1080p
Case SilverStone Raven RV02B-W + 3x SS AP181 + USB3.0 upgrade
Audio Device(s) Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp Technics Speaker set
Power Supply SilverStone ST75F-P Modular 750W
Mouse Logitech G402 Hyperion Fury
Keyboard Logitech G105
Software Windows 10 X64 PRO (build 1607)
Benchmark Scores it sucks even less much now ;)
Well...,

First, thanks for trying this now, instead of when CC has started.

You will want to use the new V7 Client. Use the link in Bog's post (post 1542) to install it and make sure you select advmethods to make it use the new core16. I for one am anxious to hear how V7 handles two ATI cards. Xfire has always needed to be disabled for Folding before but I don't know with V7. Please let us know. Might I suggest you also read through http://www.techpowerup.com/forums/showthread.php?t=143124 . Some of those links are older...
Dummy plugs? I sure hope not.
No need to disable Xfire any more and your right an dummy plug is not needed anymore
I fold with Xfire enabled turn it off and one card stops folding
 
Joined
Jul 2, 2008
Messages
6,375 (1.83/day)
Likes
8,454
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
Last edited:
Joined
Jul 2, 2008
Messages
6,375 (1.83/day)
Likes
8,454
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
Slightly OT, but since this is for the CC and I know that you guys know how to OC for Folding...,

To help me save time, will someone(s) please point me to a good (but short) guide(s), or source(s) for OC'ing the following:

Phenom II X4 805 that's on a (cheap) Biostar A880G Only trying to get to 3.0, but maybe more for CC.;) CM 212+

i5-650 on an Asus P7P55D-E Pro. I can get it stable to 3.6 from 3.2 stock, but above that I'm having problems. I'm expecting 4.0+. In a CM ATCS 840 with a H50. Got the case and cooler for $80!
 
Joined
Jan 31, 2010
Messages
2,471 (0.85/day)
Likes
782
System Name Xtreme PC's AMDx8
Processor AMD FX8320 @ 4.0GHz NB/HT @ 2.6GHz
Motherboard Asus Crosshair V Formula
Cooling ThermoLab Baram 2x 120mm Gentle Typhoons 1850rpm
Memory 8GB (2x4GB) Mushkin Blackline DDR3 2400MHz 11/13/13/34/1T 1.65V
Video Card(s) Sapphire Nitro+ RX580 8GB OC 1342/2000 (Core/Mem) BIOS Modded
Storage 2x Kingston V300 120GB SSD's Raid0: 1x Sandisk 128GB SSD 1xWD 2TB red, 1xWD 1TB black 1xWD 2TB nas
Display(s) ViewSonic VX2457 75Hz FreeSync 1920x1080p
Case SilverStone Raven RV02B-W + 3x SS AP181 + USB3.0 upgrade
Audio Device(s) Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp Technics Speaker set
Power Supply SilverStone ST75F-P Modular 750W
Mouse Logitech G402 Hyperion Fury
Keyboard Logitech G105
Software Windows 10 X64 PRO (build 1607)
Benchmark Scores it sucks even less much now ;)
Joined
Jul 2, 2008
Messages
6,375 (1.83/day)
Likes
8,454
Location
Hillsboro, OR
System Name Main/DC
Processor i7-3770K/i7-2600K
Motherboard MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling Phanteks PH-TC14CS/H80
Memory Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s) Asus GTX 660 Ti/MSI HD7770
Storage Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s) Asus 24' LED/Samsung SyncMaster B1940
Case P100/Antec P280 It's huge!
Audio Device(s) on board
Power Supply SeaSonic SS-660XP2/Seasonic SS-760XP2
Software Win 7 Home Premiun 64 Bit
Joined
Jan 31, 2010
Messages
2,471 (0.85/day)
Likes
782
System Name Xtreme PC's AMDx8
Processor AMD FX8320 @ 4.0GHz NB/HT @ 2.6GHz
Motherboard Asus Crosshair V Formula
Cooling ThermoLab Baram 2x 120mm Gentle Typhoons 1850rpm
Memory 8GB (2x4GB) Mushkin Blackline DDR3 2400MHz 11/13/13/34/1T 1.65V
Video Card(s) Sapphire Nitro+ RX580 8GB OC 1342/2000 (Core/Mem) BIOS Modded
Storage 2x Kingston V300 120GB SSD's Raid0: 1x Sandisk 128GB SSD 1xWD 2TB red, 1xWD 1TB black 1xWD 2TB nas
Display(s) ViewSonic VX2457 75Hz FreeSync 1920x1080p
Case SilverStone Raven RV02B-W + 3x SS AP181 + USB3.0 upgrade
Audio Device(s) Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp Technics Speaker set
Power Supply SilverStone ST75F-P Modular 750W
Mouse Logitech G402 Hyperion Fury
Keyboard Logitech G105
Software Windows 10 X64 PRO (build 1607)
Benchmark Scores it sucks even less much now ;)
you'll get better performance by increasing the HT/NB clocks more so than just purely upping the core clocks