• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

*** F@H Tech Assistance Thread ***

gpu2 keeps dropping wu's, either unstable machine error, or early end. i cranked up the fans to 100%, temps dropped, but still get errors...these cards are factory OC'ed...

I can figure out which card is which in gpu-z, but not in afterburner or the client
 
gpu2 keeps dropping wu's, either unstable machine error, or early end. i cranked up the fans to 100%, temps dropped, but still get errors...these cards are factory OC'ed...

I can figure out which card is which in gpu-z, but not in afterburner or the client

What client?
 
fahtracker v2 from chimp challenge thread
 
Try the newer v7 client and see if you still get the "UNSTABLE_MACHINE" errors.

Also are you using both 260's in the rig? If you are, you need to extend the 2nd card to the 1st that way the client will see both cards.
 
alright, the client sees all three cards, but i have disabled the 8500 on recommendation. i am in the middle of a quiz, i will load up v7 in few and report back.

as far as "extending," is that something in v7, cuz i didn't see that in v2 fahtracker?
 
almost 24h bump update...i blame all problems on ocz agility 60 gb. went back to warp 32GB and seems fine...fahtracker 2, 17936 ppd
 
Does this look right for an i7 2600K? F@H Client V7 doesn't give me an estimate so used the bonus calc:

bigadv.jpg
 
Yes, unless you are running 4.5 GHZ. Is it dedicated?
 
This is the 4.4GHz that I use day to day. The 4.6GHz dedicated one has a GTX470 folding on it too so the TPF is more or less the same. Struggling to bring the third 2600K online, powers off without BSOD which has me confused.

EDIT: Are bigadv memory speed dependent? Just wondering if the 1333MHz is affecting performance. Doesn't for WCG, but may be different here.
 
how can you ppl use f@h at more than 4ghz,i have real big heat issues at 3,6ghz
 

Attachments

  • F@H.jpg
    F@H.jpg
    201.6 KB · Views: 386
how can you ppl use f@h at more than 4ghz,i have real big heat issues at 3,6ghz

Bahh...80C is for wimps, push it up some more :roll: :roll:

Really need to use water cooling when pushing these i7's, that is what I use
 
how can you ppl use f@h at more than 4ghz,i have real big heat issues at 3,6ghz

Most of us settle @ 3.8Ghz. I have 3x i7's air cooled(CMHyper 212 Plus) that hover around 75C.
 
After a google frenzy, seen that others get 38K PPD on 2685WU at 4.6GHz. Meh.. thought SNB would be better :ohwell:
 
I just tried to run GPUZ while folding and my entire system locked right up???
 
After a google frenzy, seen that others get 38K PPD on 2685WU at 4.6GHz. Meh.. thought SNB would be better :ohwell:

Ahh didnt see the 2685WU part, if you can catch one of the 6900WU you should see your PPD rise some more.
 
After a google frenzy, seen that others get 38K PPD on 2685WU at 4.6GHz. Meh.. thought SNB would be better :ohwell:

Mine gets about 42k @ 4.6 With a GTX 275 also folding. Without the 275 it's 47k.
 
Mine gets about 42k @ 4.6 With a GTX 275 also folding. Without the 275 it's 47k.

Show off:rolleyes:

Kidding aside, I'll have my 2600K coming online later today;)
 
Mine gets about 42k @ 4.6 With a GTX 275 also folding. Without the 275 it's 47k.

42K to my 40K doesn't seem too bad then. PM'd for memory settings see if I can squeeze those extra points for the chimp.
 
42K to my 40K doesn't seem too bad then. PM'd for memory settings see if I can squeeze those extra points for the chimp.

Memory is stock, G.Skill Ripjaws F3-12800CL9D-8GBLX.:)
 

Attachments

  • CPU-Z.JPG
    CPU-Z.JPG
    42.3 KB · Views: 359
  • 11.JPG
    11.JPG
    84.4 KB · Views: 336
I already have my GPU'S folding how do I stop/pause crunching and add my CPU?....keep it simple...lol
 
Guys, I setup my CPU to fold, is everything okay? It's at 100% usage, just want to make sure everything else is okay.

Capture010337.jpg
 
I already have my GPU'S folding how do I stop/pause crunching and add my CPU?....keep it simple...lol

If you running the V7 client you don't need to stop folding add an new slot ;)
 
If you running the V7 client you don't need to stop folding add an new slot ;)

Its crunching i am worried about....give me a step by step to set up my CPU
 
Back
Top