Fitseries3
Eleet Hardware Junkie
- Joined
- Oct 6, 2007
- Messages
- 15,508 (2.56/day)
- Location
- Republic of Texas
so i setup F@H on my 295 and for some reason im having problems.
i have setup gpu0 and gpu1 as usual.
if i start gpu0 then gpu1...
gpu0 will run on the 1st(primary) gpu on the card and fold fine.
gpu1 will EUE and stop within 30seconds.
HOWEVER...................
IF i start gpu1 first and then gpu0...
gpu1 will run on the 1st(primary) gpu on the card and fold fine
and
gpu0 will EUE and stop within 30seconds.
now i thought if i specified "GPU0" that the 1st card, 1st gpu would always be folding that info.
that seems not to be the case.
STILL...
my problem is that i cannot get both gpus folding on the 295 BUT I HAVE IN THE PAST.
i have hdmi and dvi both running out to an actual monitor and both are active in both windows display manager and nvidia control pannel.
i have tried different drivers and reinstalling OS with no solution found yet.
WHY OOOOOOOO WHY must i always suffer from these SHIT problems?
i have setup gpu0 and gpu1 as usual.
if i start gpu0 then gpu1...
gpu0 will run on the 1st(primary) gpu on the card and fold fine.
gpu1 will EUE and stop within 30seconds.
HOWEVER...................
IF i start gpu1 first and then gpu0...
gpu1 will run on the 1st(primary) gpu on the card and fold fine
and
gpu0 will EUE and stop within 30seconds.
now i thought if i specified "GPU0" that the 1st card, 1st gpu would always be folding that info.
that seems not to be the case.
STILL...
my problem is that i cannot get both gpus folding on the 295 BUT I HAVE IN THE PAST.
i have hdmi and dvi both running out to an actual monitor and both are active in both windows display manager and nvidia control pannel.
i have tried different drivers and reinstalling OS with no solution found yet.
WHY OOOOOOOO WHY must i always suffer from these SHIT problems?