• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Feature Requests

can you add posibility to overclock ASUS A6Km CPU please ?
chipset is SIS 756 rev 02, and my CPU is Turion MT-32

thanks in advance !
 
I think there are a lot of us(intel 945gnt users) that would like support for the IDT CV115FPVG clock generator.
When i use the IDT CV115-4 it shows double the fsb and double the frequency(i have an intel p4 630)
Thanks,

Ditto here!
 
I've a pentium 4-m (mobile) processor in abit is7-e board. It is possible to add multiplier setting for this cpu?
(12-25, min-max multiplier)
 
Need PCI lock, voltage raising, and support for
Mainboard.gif
 
I've opened today my T43 IBM laptop and found the clockgen to be ICS 954204 - datasheet here. Can you please add support for it in SysTool? It will be great to overclock my Dothan. Thanks!
It's very good idea to support this chip. It's (ICS 954204 BFLF) used in
Gigabyte GA-8I945GZME-RH motherboard. It support Core2duo 6300 - but
only with 200MHz FSB :-( So proc works at 1400MHZ core speed only.
Thanks!
 
i didnt read anything in this post so im sure ppl already said this but here are my "requests":

1. Most Important a LOG if possible simular like mbm nice, neet and with high/low/avg
2. no bloatware keep it fast and using as least as posible recources, no skins and that kind of junk (best example of what Not to do is uguru :)


thx

btw i think this will be the next mbm for me
 
Hi! I have AsRock AM2XLI-eSATA2 and it's not supported by systool b.702, current version. Can't you add its support, please! it's based on uli 1697 chipset, and I dont know its clock generator or how to find out its name...
 
is there any chance we could get support for the Jetway 939 GT4-SLI
it's nforce4 based, and the OC works, but it's kind of buggy, and no temp monitors

please please please!?
 
Any chance to see support for the ASRock 775Dual-VSTA clockgen? It's a Realtek RTM866-890, probably as aged or more than the chipset of the board (VIA PT880 Ultra / VT8237A). I've found nothing trough internet about it, so probably isn't used almost anywhere else.
 
PLL not found?

Is it possible to add ISC 951412 PLL clock? This is on a lappie from HP (I know everybody says do not overclock, but this model has the 939 desktop socket and the fans to go along if she dies she dies). The board is named Hewlett-Packard Pavilion ZV6100 (EC360UA#ABA) if that helps. I can give the complete list of hardware if needed.
Thank you,
1 deviant lappie
 
I have noticed lately in the monitoring window that if you adjust the graph windows to a different range than default, they do not stay that way. Say for instance you adjust the 12v graph from it default range of 15.20v - 9.70v to 12.68v - 11.4v. If you move out of that window or pick a different sesnor, then go back to the 12v sensor it has moved back to the default 15.20v - 9.70v. It would be nice to have these stay, or perhaps be able to set them in the properties box for that sensor.
 
I have a dell xps m1710 it has the pll of type "Pericom P16C 410MAE" Could you please add this to your programs database.

Thank you Wizzard for all that you have done! Keep up the good work
 
Does somebody know whats the PLL of the MSi RS482M4-ILD? May it be Winbond W83627THF? I don't know what to look for and where the PLL should be
 
Is it possible to add ISC 951412 PLL clock? This is on a lappie from HP (I know everybody says do not overclock, but this model has the 939 desktop socket and the fans to go along if she dies she dies). The board is named Hewlett-Packard Pavilion ZV6100 (EC360UA#ABA) if that helps. I can give the complete list of hardware if needed.
Thank you,
1 deviant lappie
My board has the same clock gen as yours dude....
 
My board has the same clock gen as yours dude....


what board is that? The exact model number of my machine is zv6123cl by HP. I would really rather use one prog. instead of both clock-gen and systool. Best case would be to rip that chip out and have Mr.Bios open up the Bios for me.
 
what board is that? The exact model number of my machine is zv6123cl by HP. I would really rather use one prog. instead of both clock-gen and systool. Best case would be to rip that chip out and have Mr.Bios open up the Bios for me.
Its an MSI board with ATi Xpress 200 with SB400 and RS480 (AMETHYST-M)

Edit: Its MS-7184
 
Last edited:
i dont know if it has been discussed. but i would like to know if there is any hope to get SYSTOOL with max fsb more than 399. for today conroe systems it is very important.

Thanks!

Ed.
 
I just got the new update released today. Did the temp sensors for the ATI cards get messed with? For no reason I'm suddenly running 4-5 C cooler than I was before.
 
I was wondering if you could help you me to get Systool working on
my board. ¿Any chance to support the Intel D946GZis mobo?
(Chipset Intel 946PL/GZ - rev. C1)
Mobo Id: TS94610J.86A.0025.2006.0703.1026

http://www.intel.com/products/motherboard/D946GZIS/index.htm

Thanks in advance !! :toast:

+1 :rockout:

Clock gen chip is IDT CV174CPAG.

All software clockers detect it when similar (older) IDT chip is selected but none changes settings.
Here's the thread about it:
http://forums.techpowerup.com/showthread.php?t=18802&page=5

Thanks a lot! :D

Edit: Here's the datasheet:
http://www.idt.com/products/files/7005462/CV174C.pdf

And here's the product page:
http://www.idt.com/?genID=CV174C
 
Last edited:
Adding support

How about adding support for Asrock K7s41GX motherboard
 
Hey.

Just want to hear if u are going to add OC support for the Asrock 775Dual-VSTA

The clockgenerator is a Realtek: RTM866-890 (63174Q1 L6241)

Btw, great work ;)
 
moin,
will the DFI UT-Lanparty CFX3200-DR be supported in the near future?
 
Back
Top