phroZeN_
New Member
- Joined
- Jul 23, 2010
- Messages
- 9 (0.00/day)
System Name | phroZeN |
---|---|
Processor | AMD Phenom II X6 1055T Thuban 2.8GHz 6 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Six-Core |
Motherboard | ASUS M4A89GTD PRO/USB3 AM3 AMD 890GX HDMI SATA 6Gb/s USB 3.0 ATX AMD Motherboard |
Cooling | CORSAIR Cooling Hydro Series CWCH50-1 120mm High Performance CPU Cooler |
Memory | G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 |
Video Card(s) | ASUS EAH5850 DirectCU TOP/2DIS/1GD5 Radeon HD 5850 |
Storage | Western Digital Caviar Green WD8000AARS 800GB 5400 RPM 64MB Cache SATA 3.0Gb/s 3.5" Internal Hard D |
Case | Corsair Obsidian Series 800D CC800DW Black Aluminum / Steel ATX Full Tower Computer Case |
Power Supply | CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC Power Supply |
Software | Windows 7 Ultimate 64 Bit |
Here's the problem.
I got a computer built and the video card resolution that it was installed on was 1080p and my monitor doesn't have that. So now when I hooked it up to mine i get nothing but a black screen. Monitor doesn't boot up and stays in standby mode. I'm running this through an HDMI cable as well. I've taken the video card out off and can run the computer fine off VGA / on-board video card. I've messed around in the BIOS / Boot screen to start on low resolution then I would install the video card and I got it to work twice (kinda) the screen would have lines goin all crazy in it and then it would just go to a blue / black screen. I would reboot and the monitor wouldn't turn on again.
The video card I'm trying to get working is the:
ASUS EAH5850 DirectCU TOP/2DIS/1GD5 Radeon HD 5850 (Cypress Pro) 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card w/ ATI Eyefinity
ASUS EAH5850 DirectCU TOP/2DIS/1GD5 Radeon HD 5850...
------------------
System Information
------------------
Time of this report: 7/23/2010, 00:51:58
Machine name: PHROZEN-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_gdr.100226-1909)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 05/04/10 14:20:43 Ver: 08.00.15
Processor: AMD Phenom(tm) II X6 1055T Processor (6 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 7934MB RAM
Page File: 1687MB used, 14179MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: ATI Radeon HD 4290
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x9714)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9714&SUBSYS_84541043&REV_00
Display Memory: 3166 MB
Dedicated Memory: 355 MB
Shared Memory: 2811 MB
Current Mode: 640 x 480 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: HG216
Monitor Id: HSD1CA3
Native Mode: 1680 x 1050(p) (59.954Hz)
Output Type: HD15
Driver Name: aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.0029 (English)
Driver Version: 8.741.0.0
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 5/27/2010 12:02:04, 592384 bytes
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
If anybody can help it'd be greatly appreciated.
Mail: Tylerdubya86@gmail.com
Steam: dab_infecti0n@yahoo.com
I got a computer built and the video card resolution that it was installed on was 1080p and my monitor doesn't have that. So now when I hooked it up to mine i get nothing but a black screen. Monitor doesn't boot up and stays in standby mode. I'm running this through an HDMI cable as well. I've taken the video card out off and can run the computer fine off VGA / on-board video card. I've messed around in the BIOS / Boot screen to start on low resolution then I would install the video card and I got it to work twice (kinda) the screen would have lines goin all crazy in it and then it would just go to a blue / black screen. I would reboot and the monitor wouldn't turn on again.
The video card I'm trying to get working is the:
ASUS EAH5850 DirectCU TOP/2DIS/1GD5 Radeon HD 5850 (Cypress Pro) 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card w/ ATI Eyefinity
ASUS EAH5850 DirectCU TOP/2DIS/1GD5 Radeon HD 5850...
------------------
System Information
------------------
Time of this report: 7/23/2010, 00:51:58
Machine name: PHROZEN-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_gdr.100226-1909)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 05/04/10 14:20:43 Ver: 08.00.15
Processor: AMD Phenom(tm) II X6 1055T Processor (6 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 7934MB RAM
Page File: 1687MB used, 14179MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: ATI Radeon HD 4290
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x9714)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9714&SUBSYS_84541043&REV_00
Display Memory: 3166 MB
Dedicated Memory: 355 MB
Shared Memory: 2811 MB
Current Mode: 640 x 480 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: HG216
Monitor Id: HSD1CA3
Native Mode: 1680 x 1050(p) (59.954Hz)
Output Type: HD15
Driver Name: aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.0029 (English)
Driver Version: 8.741.0.0
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 5/27/2010 12:02:04, 592384 bytes
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
If anybody can help it'd be greatly appreciated.
Mail: Tylerdubya86@gmail.com
Steam: dab_infecti0n@yahoo.com
Last edited: