- Joined
- May 2, 2017
- Messages
- 7,762 (3.04/day)
- Location
- Back in Norway
System Name | Hotbox |
---|---|
Processor | AMD Ryzen 7 5800X, 110/95/110, PBO +150Mhz, CO -7,-7,-20(x6), |
Motherboard | ASRock Phantom Gaming B550 ITX/ax |
Cooling | LOBO + Laing DDC 1T Plus PWM + Corsair XR5 280mm + 2x Arctic P14 |
Memory | 32GB G.Skill FlareX 3200c14 @3800c15 |
Video Card(s) | PowerColor Radeon 6900XT Liquid Devil Ultimate, UC@2250MHz max @~200W |
Storage | 2TB Adata SX8200 Pro |
Display(s) | Dell U2711 main, AOC 24P2C secondary |
Case | SSUPD Meshlicious |
Audio Device(s) | Optoma Nuforce μDAC 3 |
Power Supply | Corsair SF750 Platinum |
Mouse | Logitech G603 |
Keyboard | Keychron K3/Cooler Master MasterKeys Pro M w/DSA profile caps |
Software | Windows 10 Pro |
I'm looking to add some quick disconnect fittings to my water loop to make it a bit easier to handle, fill, leak test, etc. Ideally I would want fittings that don't leak (obviously), are relatively easy to connect and disconnect, aren't too large (this is going into an SFF build, so fittings reaching 10cm long when connected are less than ideal), and don't impede flow too much (I currently have an EK-SPC pump, and I'm planning to ditch that for an Alphacool Eisbaer LT Solo pump/block combo). And ideally they shouldn't be wildly expensive. They also need to be available for purchase in Norway or Sweden. Any suggestions? My preferred water cooling shop exclusively sells Barrow QDCs, and while I know Barrow makes some good stuff I have no idea about their QDCs - and I'm very wary of bad ones.