solidspartan117
New Member
- Joined
- Aug 7, 2012
- Messages
- 5 (0.00/day)
Hi I'm new here and I have a big problem, I have tried everything and would like any help I can get.
My Rig:
Intel Core i5 2320 @ 3.4Ghz
Acer Oem Motherboard
4Gb Dual Channel 1333Mhz DDR3 Ram
Gainward GTX275 Golden Sample
500Gb Western Digital Blue Caviar
DVD Re-writer Drive
3 Non-LED Case Fans
Fractal Design Tesla 600W Psu
The Graphics Card when connected wont display through my monitor and I have Re-seated 4x and checked that all connections are secure and that both 6-pin Pci-e are connected but still no display. When I plug it into my On board Graphics then the display comes on and everything works, I have tried disabling the on board Graphics through Device Manger to no avail and I cant change the primary boot in the Bios as it is Oem and wont let me.
The PSU is new and has more than enough power but I will give you some details:
+3.3V = 24A
+5V = 24A
+12v1 = 20A
+12v2 = 20A
+12v3 = 20A
+12v4 = 20A
-12v = 0.5A
+5Vsb = 2.5A
The Continuous output is rated at 531.5W with a peak of 600W and is 80Plus Certified
So I highly doubt it is the power supply as it has more than enough but I suppose it could be faulty? and it was then how would I tell?
I also should mention that I have tested the Graphics card in another system and it worked fine and when I put a low profile card into my computer it worked, so is it my Motherboard or something else? I am at a complete loss and any help would be greatly appreciated.
My Rig:
Intel Core i5 2320 @ 3.4Ghz
Acer Oem Motherboard
4Gb Dual Channel 1333Mhz DDR3 Ram
Gainward GTX275 Golden Sample
500Gb Western Digital Blue Caviar
DVD Re-writer Drive
3 Non-LED Case Fans
Fractal Design Tesla 600W Psu
The Graphics Card when connected wont display through my monitor and I have Re-seated 4x and checked that all connections are secure and that both 6-pin Pci-e are connected but still no display. When I plug it into my On board Graphics then the display comes on and everything works, I have tried disabling the on board Graphics through Device Manger to no avail and I cant change the primary boot in the Bios as it is Oem and wont let me.
The PSU is new and has more than enough power but I will give you some details:
+3.3V = 24A
+5V = 24A
+12v1 = 20A
+12v2 = 20A
+12v3 = 20A
+12v4 = 20A
-12v = 0.5A
+5Vsb = 2.5A
The Continuous output is rated at 531.5W with a peak of 600W and is 80Plus Certified
So I highly doubt it is the power supply as it has more than enough but I suppose it could be faulty? and it was then how would I tell?
I also should mention that I have tested the Graphics card in another system and it worked fine and when I put a low profile card into my computer it worked, so is it my Motherboard or something else? I am at a complete loss and any help would be greatly appreciated.