- Joined
- Nov 9, 2010
- Messages
- 5,657 (1.15/day)
System Name | Space Station |
---|---|
Processor | Intel 13700K |
Motherboard | ASRock Z790 PG Riptide |
Cooling | Arctic Liquid Freezer II 420 |
Memory | Corsair Vengeance 6400 2x16GB @ CL34 |
Video Card(s) | PNY RTX 4080 |
Storage | SSDs - Nextorage 4TB, Samsung EVO 970 500GB, Plextor M5Pro 128GB, HDDs - WD Black 6TB, 2x 1TB |
Display(s) | LG C3 OLED 42" |
Case | Corsair 7000D Airflow |
Audio Device(s) | Yamaha RX-V371 |
Power Supply | SeaSonic Vertex 1200w Gold |
Mouse | Razer Basilisk V3 |
Keyboard | Bloody B840-LK |
Software | Windows 11 Pro 23H2 |
A long while ago I made a thread about not being able to get PCM 5.1 audio pass through via HDMI out on my GPU. I can get a working HDMI option in the Windows sound panel, but only as my stereo TV.
Recently though I found a thread where guys were talking about Wii U's requiring an LPCM 5.1 capable receiver, and turning off the AVR's passing the audio to a stereo TV if passing the signal through the receiver.
I'm not sure if an inability to pass HDMI video through my AVR is the problem, or the AVR being set to pass audio to a stereo TV, or neither, but nothing I've tried allows me to get 5.1 PCM audio out of my games using HDMI.
Can anyone tell me how to set this up? TV, AVR and GPU are listed in my sys spec chart.
I have the same AVR mentioned in the following thread btw. How would I do what Mark suggested in post #5?
http://www.avforums.com/forums/av-amplifiers-receivers/1505712-yamaha-rxv371-outputing-2-1-only.html
Recently though I found a thread where guys were talking about Wii U's requiring an LPCM 5.1 capable receiver, and turning off the AVR's passing the audio to a stereo TV if passing the signal through the receiver.
I'm not sure if an inability to pass HDMI video through my AVR is the problem, or the AVR being set to pass audio to a stereo TV, or neither, but nothing I've tried allows me to get 5.1 PCM audio out of my games using HDMI.
Can anyone tell me how to set this up? TV, AVR and GPU are listed in my sys spec chart.
I have the same AVR mentioned in the following thread btw. How would I do what Mark suggested in post #5?
http://www.avforums.com/forums/av-amplifiers-receivers/1505712-yamaha-rxv371-outputing-2-1-only.html