help needed for a bios setting on sapphire pure rd580

[chefnr1]

Need help with bios setting on my sapphire pure inovation rd580, it doesnt matter how i set it it's just beeping when i save and exit it's my rig in sign thats it's about, please someone i'm desperat, and are there any type of clockgen for this board, i'll go nuts if i cant fix this

 

[POGE]

Have you tried to clear the cmos? Look in your motherboard manual on what jumper to use.

 

[chefnr1]

Have you tried to clear the cmos? Look in your motherboard manual on what jumper to use.

yes i have cleare cmos several time, after every try to set something in bios i must clear cmos because it will not boot at all just beeping but after clearing cmos it's booting fine but i want to clock a little but it's not working at all
and my Geil One is good for 270mhx+ with 3,68v

 

[POGE]

Humm... I'm just gonna take a shot in the dark on this one. It may be a corrupted bios. Try to reflash it, if you dont know how, ask here, or look on sapphires website.

 

[chefnr1]

Humm... I'm just gonna take a shot in the dark on this one. It may be a corrupted bios. Try to reflash it, if you dont know how, ask here, or look on sapphires website.

have the bios that came with the board and i dont think it's a corupped issues it's just that i dont know exacly how to set all the things there are in the bios it's so much to set in it, makes my head spin and confuse me ´totally

 

[Urlyin]

What are the beep codes for that BIOS ... trying to tell you something

 

[chefnr1]

What are the beep codes for that BIOS ... trying to tell you something

when i set something in memsetting and reboot there is 2 long beeps and what i read about it it means ,2 Beeps=Memory parity error but my mem works just fine on my DFI platform and going at 270mhz+ at 3,6v so it can not be a memory failure, i think it's the bios that are incorrect but i cant find any newer one to flash in so i'm stuck with optimized defaults

 

[Thermopylae_480]

I'm a bit confused. Is everything working correctly under default settings? Are you saying your problem begins when you try to overclock?

 

[chefnr1]

I'm a bit confused. Is everything working correctly under default settings? Are you saying your problem begins when you try to overclock?

everything works fine on optimized defaults, problem starting when i shall change mem settings cant change anything that my mem can handle and when i save and exit just looping long beeping, haveBios beep codes and that means memory error but my mem works fine on my DFI board so thats not the problem that they are bad at all, and i am sure that it is a bios issue, and my atitool is totaly crazy tried several of versions some of them dont work at all an the other that i can clock with is just crazy when i set it to org speed to my card and then set cklock it jumps up tp over 2800mhz on both core and mem, i'll go nuts on this,and my first boar was dead on arrival so this is my second board....

 

[Thermopylae_480]

Don't change things you don't know how to set. Try playing with just the things that you are familiar with and see if it still creates a problem. I would still try flashing your BIOS even if it is up to date. If for some reason your BIOS is corrupted that might fix it.

 

[chefnr1]

Don't change things you don't know how to set. Try playing with just the things that you are familiar with and see if it still creates a problem. I would still try flashing your BIOS even if it is up to date. If for some reason your BIOS is corrupted that might fix it.

i've manage to set bios memsettings so that i can clock have for now 245x11 and will try to get a little higher, and i just change those that i recognize, so it's a start forward for me now i'm not that frustrated anymore

 

[chefnr1]

well manage to do this so far, but the org cooler are not good on X1600XT must change it to something better..








http://service.futuremark.com/compare?2k1=8963519