• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Help- PC On BootLoop. Fix Upgrade or Buy New?

tried both rams seperatly- nothing.
tried set on other slots- got 1 long beep and 3short beeps after.
then 1 short beep every 5-10sec.

same behavior after reboot


EDIT:
I dont understand whats going on...
after i left the pc for a min or 2 with the single beep every 10sec, it shutdown itself.

then after reboot, single beep, and bios popup appeared asking me 3 option, i choosed "Set default settings and boot" and windows started and all looks ok.
i shut the pc down and powered up again- working.
i suted down 3rd time, still working...

now it is up and looks fine again.
note at the moment- both rams are in the 3rd and 4th slot(they was at 1st and 2nd).
 
Last edited:
tried both rams seperatly- nothing.
tried set on other slots- got 1 long beep and 3short beeps after.
then 1 short beep every 5-10sec.

same behavior after reboot


EDIT:
I dont understand whats going on...
after i left the pc for a min or 2 with the single beep every 10sec, it shutdown itself.

then after reboot, single beep, and bios popup appeared asking me 3 option, i choosed "Set default settings and boot" and windows started and all looks ok.
i shut the pc down and powered up again- working.
i suted down 3rd time, still working...

now it is up and looks fine again.
note at the moment- both rams are in the 3rd and 4th slot(they was at 1st and 2nd).

Board manuals typically tell you what slots to occupy first when using only 1-2 modules of ram. If it fails again try other ram. Also check for mobo bios updates
 
Back
Top