How can I OC my Ram?

[mclaren85]

I have 4 sets of 3600 mhz DDR-4 8 gb rams. But at the default bios settings, It runs at 2666 Mhz. I tried A-XMP presets but system fails to launch. Here are my cpu-z and bios screen menu. How can I make the correct adjustments in order to run at advertised speeds?

 

[68Olds]

Get a screenshot of all your Voltage Settings. You might need to manually set the DRAM voltage to 1.35v and another setting due to having 4 sticks.

 

[izy]

You can try "Memory try it !" , it wont be as good as if you doing it manually but you can start from there. You can also try DRAM-Calculator-for-Ryzen-1.7.3 ( https://www.techpowerup.com/download/ryzen-dram-calculator/ ) to help you with the timmings.

 

[ThrashZone]

Hi,
3600c18
Well you can start out posting the VER# on the side of the stick
Run this and use Read post the screen shot

Thaiphoon Burner - Official Support Website

 

[BMfan80]

Maybe this can help...https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4%20OC%20Guide.md#gskill-042-code

 

[Deleted member 185158]

Under "Game Boost" hit the XMP 2 button. F10 and restart should be all you need to do. I think that's what you're asking?

 

[JrRacinFan]

Try with only 2 sticks first.

 

[Kapone33]

I have this board and it will not do 4 DIMMs at 3600MHz even if that is the XMP for the RAM. This board in particular has so much going on that the Memory OC on 4 sticks is not good. If you want try 2 sticks and use Mem Tryit in the BIOS to see if you can get 4000 MHz using 2 sticks. That will usually work but make sure you check HWinfo64 for errors. You could potentially get 3200MHZ on all 4 but the timings will still be loose.

 

[izy]

I have this board and it will not do 4 DIMMs at 3600MHz even if that is the XMP for the RAM. This board in particular has so much going on that the Memory OC on 4 sticks is not good. If you want try 2 sticks and use Mem Tryit in the BIOS to see if you can get 4000 MHz using 2 sticks. That will usually work but make sure you check HWinfo64 for errors. You could potentially get 3200MHZ on all 4 but the timings will still be loose.

I dont think that X570s can be worse than B450 tomahawk on RAM OC (used to have an b350 PC MATE some time ago that worked with 3400 on Zen1) , i can push 3800mhz on RAM (maybe even more , but my IMC its limited to 3733mhz stable) on Zen2 B450.

 

[ir_cow]

I wrote is on TPU discord, so I'll just copy and paste what I wrote.

The two things I would do to start. Try each kit at AXMP separately. If it works. All 4 DIMMs, enable AXMP and manually set the memory to 3200 at the same time. If that works, now you know its just a timing / voltage thing to play around with

 

[JrRacinFan]

I dont think that X570s can be worse than B450 tomahawk on RAM OC (used to have an b350 PC MATE some time ago that worked with 3400 on Zen1) , i can push 3800mhz on RAM (maybe even more , but my IMC its limited to 3733mhz stable) on Zen2 B450.

I know my own x570s will not run 4 sticks at xmp. Hence suggestion of trying 2 sticks

 

[mclaren85]

I wrote is on TPU discord, so I'll just copy and paste what I wrote.

The two things I would do to start. Try each kit at AXMP separately. If it works. All 4 DIMMs, enable AXMP and manually set the memory to 3200 at the same time. If that works, now you know its just a timing / voltage thing to play around with

All four sticks are same brand and model except one is made by micron the other is samsung. Is that make any difference?

Also, Do A-xmp profile not compatible with 4 slot ram?