Norton
Moderator - Returning from the Darkness
- Joined
- Dec 21, 2011
- Messages
- 14,108 (3.00/day)
- Location
- Northeast USA
System Name | Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs |
---|---|
Processor | Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc... |
Motherboard | Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc... |
Cooling | Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc... |
Memory | 2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc.. |
Video Card(s) | MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc... |
Storage | Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc... |
Display(s) | Main PC (2x24" Dell UltraSharp U2414H) |
Case | Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc... |
Audio Device(s) | Logitech Z625 THX 2.1 speakers |
Power Supply | EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc... |
Mouse | G300s |
Keyboard | Corsair K65 |
VR HMD | N/A |
Software | Windows 10 Pro or Ubuntu |
Benchmark Scores | Why sit on the Bench when you can get in the game and Crunch!!! |
Hi guys Joined in order to add info in this thread:
OldChap| Seasonic 1000p | 2*xeon e5 2650 @2.4(turbo)| 1 SSD | 240W @ 100% | 19600 on VINA | 81.89 | Linux Mint 17 | Watercooled (d5) 4 fans 24/7 crunching
OldChap| Seasonic 1000p | 2*xeon e5 2650 @2.4(turbo)| 1 SSD | 240W @ 100% | 13813 on non-VINA | 57.55 | Linux Mint 17 | Watercooled (d5) 4 fans 24/7 crunching
OldChap| Seasonic ss330 bronze| celeron j1900 @2.4(turbo)| 1 SSD | 17.5W @ 100% | 1809 on VINA | 103.37| Linux Mint 17 | passive cooled 24/7 crunching
OldChap| Seasonic ss330 bronze| celeron j1900 @2.4(turbo)| 1 SSD | 17.4W @ 100% | 1330 on non-VINA | 76.43| Linux Mint 17 | passive cooled 24/7 crunching
Points of note: the bigger rig is about 95% efficient in that the power from the socket is only 5% higher at 252.7w
The same cannot be said of the bronze psu trying to run at 5% load. This is closer to 65% efficient.
Close attention must therefore be paid to psu selection or multiple boards could be run from one psu or maybe one of these j1900 rigs could be piggybacked onto an existing rig.
Welcome and thanks for your contribution to the thread!