• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

How to use ThrottleStop for 2 CPUs individually ?

erich56

New Member
Joined
Apr 27, 2023
Messages
7 (0.01/day)
My HP Workstation Z840 has 2 CPUs Intel Xeon E5 2667 V4 Octacore 3.2GHz inside.
I am using ThrottleStop 9.6 for over- an underclocking, which works well. However, I have not found out yet whether I can set the "Clock Mode" and/or "Multiplier" value seperately for the two CPUs. Any idea whether this is possible or not?
 
Go to the "Actions" tab, click "Create", select the "Start program" action and specify the path to the executable file Throttlestop .exe; Go to the "Conditions" tab, where we need to uncheck the "Conclusion only when powered by mains power" box and click OK to complete the configuration task.
 
Last edited by a moderator:
the google translator says:

Go to the “Actions” tab, click “Create”, select the “Run program” action and specify the path to the Throttlestop .exe executable file; We go to the “Conditions” tab, where we need to uncheck the “Conclusion only when powered from the mains” and click OK to complete the setup task.

Your are sure that this is the answer to my question?
 
AI is terrible at answering some questions.

I have never owned a computer with two CPUs so ThrottleStop does not officially support those systems. Some users have had success by creating two separate ThrottleStop folders and running two separate versions of ThrottleStop. You might have to rename ThrottleStop.exe to ThrottleStop1.exe and ThrottleStop2.exe.

If you can find a way to run each version on each CPU, this might work.
 
Back
Top