Most WTF cooler?

[thebluebumblebee]

Friend of mine 10 minutes down the road has one.

As I was reading this, I was expecting you to say that you could hear it from your place.

 

[Athlonite]

It's a real shame this thing never came to much

Or one of these bad boys

 

[The Von Matrices]

It's a real shame this thing never came to much
View attachment 60241

I don't see how the aluminum impeller could simultaneously rotate and maintain enough heat transfer with the baseplate to be effective. If you look at the second picture, it describes an "air gap region," and as we all know air isn't known for its thermal conductivity.

 

[uuuaaaaaa]

I don't see how the aluminum impeller could simultaneously rotate and maintain enough heat transfer with the baseplate to be effective. If you look at the second picture, it describes an "air gap region," and as we all know air isn't known for its thermal conductivity.

It is all about the properties of the boundary layer.

http://www.frostytech.com/articleview.cfm?articleID=2722

 

[HossHuge]

 

[Jetster]

It is all about the properties of the boundary layer.

http://www.frostytech.com/articleview.cfm?articleID=2722

The video is interesting

 

[THE_EGG]

It's a real shame this thing never came to much

View attachment 60241

Or one of these bad boys

View attachment 60242

Interesting concept.

It would suck if a cable/wire somehow found its way near that in the computer...

 

[Jetster]

Interesting concept.

It would suck if a cable/wire somehow found its way near that in the computer...

Or your finger

 

[THE_EGG]

Or your finger

Daaaaamn yeh, although I'd probably keep clear of that like it has a disease if I had to do something inside my computer if it was running.

 

[Aquinus]

Or your finger

Yup. Those fans that do over 5000 RPMs, you don't want you put your finger anywhere near those. I did and was fortunate that it only put a gash in my finger instead of taking the tip of it off.

Pro tip: Don't get distracted while working on active hardware, the consequences can be painful.
More pro tip: Don't work on active hardware.

 

[Athlonite]

On one video about the Sandia I watched them spin it up to 15K rpm just to show how fast it really can go if need be (Most definitely NOT something you'd want to put a finger )

 

[Animalpak]

Ghetto waterblock ?

 

[BiggieShady]

The video is interesting

Too bad it doesn't work mounted vertically ... I'm assuming it needs gravity to be in specific direction for it to work

 

[OneMoar]

Too bad it doesn't work mounted vertically ... I'm assuming it needs gravity to be in specific direction for it to work

doesn't work at all its complete bullshit its why they never went anyware they got de-bunked
years ago ...

 

[Capitan Harlock]

sorry for necro, but wdf, pussy vibrating cooler?

just to let you know is louise from a famos anime and novel series called zero no tsukaima xd is a collector item now xd

 

[uuuaaaaaa]

Too bad it doesn't work mounted vertically ... I'm assuming it needs gravity to be in specific direction for it to work

Mounting vertically wouldn't affect it that much, the hydrodynamic effect would still be there.

 

[Athlonite]

doesn't work at all its complete bullshit its why they never went anyware they got de-bunked
years ago ...

errr no it didn't

read here http://www.frostytech.com/articleview.cfm?articleID=2722

development continues and as for horizontal vs vertical the article states this "According to the developers, the Sandia cooler is in fact orientation agnostic"

 

[OneMoar]

errr no it didn't

read here http://www.frostytech.com/articleview.cfm?articleID=2722

development continues and as for horizontal vs vertical the article states this "According to the developers, the Sandia cooler is in fact orientation agnostic"

they are full of crap end of discussion when they bring a usable product to market then they can talk

 

[natr0n]

 

[Athlonite]

they are full of crap end of discussion when they bring a usable product to market then they can talk

What ever floats ya boat that's your opinion and your entitled to it but just just because they're yet to bring a product to market doesn't mean its been "De-Bunked" as you put it if it has then by all means supply a source that categorically states it's rubbish and will never work or be brought to market

 

[micropage7]

at least it looks like a normal fan

 

[Octopuss]

they are full of crap end of discussion when they bring a usable product to market then they can talk

So are you. I suggest you learn how to type properly and use capitalization and punctuation instead of posting hostile garbage all the time.

 

[Random Murderer]

they are full of crap end of discussion when they bring a usable product to market then they can talk

What ever floats ya boat that's your opinion and your entitled to it but just just because they're yet to bring a product to market doesn't mean its been "De-Bunked" as you put it if it has then by all means supply a source that categorically states it's rubbish and will never work or be brought to market

So are you. I suggest you learn how to type properly and use capitalization and punctuation instead of posting hostile garbage all the time.

Ok guys, calm down. No use in having a senseless argument when we could be posting more WTF coolers.
LESS TALK, MOAR PICS!

Here's one, the T-Shooter:
[url=http://www.frostytech.com/permalinkArch.cfm?NewsID=76891]Frosty-Tech link[/URL]

 

[eidairaman1]

The adapter could of been cut down further lol

 

[Athlonite]

now this is a crazy sized GPU HSF from Colorful

at this size it would make more sense to water cool the damn thing don't you think