I replaced my old 17"CRT monitor with a 22" LCD monitor Belinea B.display 4.1_22 wide. For optimal quality I connected the Belinea monitor via DVI.
My problem :
There is no DVI signal during boot (POST) till Windows starts.
Analog connected (vga) the boot can be followed on the screen.
Because I have to choose between different hardware profiles, I really need to see this boot sequence.
On different forums I read about the existing of this phenomenon, but nowhere have I found a solution.
My system: Dell Dimension 8400 (10/2004)
Graphics card: Radeon X800 SE
Already done :
I loaded the latest computer bios upgrade (A09).
I loaded the latest Catalyst control center and Ati driver version.
In Catalyst, I activated in Digital Panel (DVI) attributes :
- Reduce DVI frequency on high-resolution displays
- Alternate DVI operational mode
Extra information from Catalyst :
Driver Packaging Version 8.471-080225a1-059746C-ATI
Catalyst® Version 08.3
Graphics Card Manufacturer Built by ATI
Was the Radeon X800 SE card made for Dell by ATI, or only the Chip?
Graphics Chipset RADEON X800GT (? Shouldn't this be X800 SE?)
Device ID 554B
Vendor 1002
Subsystem ID 0302
Subsystem Vendor ID 1002
Bus Type PCI Express
Current Bus Setting PCI Express x16
BIOS Version 009.003.001.017
BIOS Part Number 113-A32102-103
BIOS Date 2004/06/11
Memory Size 128 MB
Memory Type DDR1
Core Clock in MHz 425 MHz
Memory Clock in MHz 351 MHz
Primary Display Yes
Has anybody a solution for this problem?
I DVI connected the LCD on another computer with Geforce card and the boot sequence was visible.
Many thanks for your help.
My problem :
There is no DVI signal during boot (POST) till Windows starts.
Analog connected (vga) the boot can be followed on the screen.
Because I have to choose between different hardware profiles, I really need to see this boot sequence.
On different forums I read about the existing of this phenomenon, but nowhere have I found a solution.
My system: Dell Dimension 8400 (10/2004)
Graphics card: Radeon X800 SE
Already done :
I loaded the latest computer bios upgrade (A09).
I loaded the latest Catalyst control center and Ati driver version.
In Catalyst, I activated in Digital Panel (DVI) attributes :
- Reduce DVI frequency on high-resolution displays
- Alternate DVI operational mode
Extra information from Catalyst :
Driver Packaging Version 8.471-080225a1-059746C-ATI
Catalyst® Version 08.3
Graphics Card Manufacturer Built by ATI
Was the Radeon X800 SE card made for Dell by ATI, or only the Chip?
Graphics Chipset RADEON X800GT (? Shouldn't this be X800 SE?)
Device ID 554B
Vendor 1002
Subsystem ID 0302
Subsystem Vendor ID 1002
Bus Type PCI Express
Current Bus Setting PCI Express x16
BIOS Version 009.003.001.017
BIOS Part Number 113-A32102-103
BIOS Date 2004/06/11
Memory Size 128 MB
Memory Type DDR1
Core Clock in MHz 425 MHz
Memory Clock in MHz 351 MHz
Primary Display Yes
Has anybody a solution for this problem?
I DVI connected the LCD on another computer with Geforce card and the boot sequence was visible.
Many thanks for your help.