• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Overclock Feedback

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.66/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
There could be. Try running OCCT (screw linpack btw). Just start it up and run it. OCCT monitors your temps and stresses the CPU. Have any other programs off.

That would be epic self pawnage if this was the case. :laugh:

Can you link me to OCCT?

Edit: Is this the correct one? Link
 
Last edited:

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Whoa dude, 1.48v is way too high for 3.5ghz. You sure lower voltages don't boot?? Anything under 1.55v is not damaging :)

I still don't buy that. 1.55v has degraded every single other AMD chip since the 939 days, and a smaller process makes the chips more sensitive to voltage. I still say 1.45V it is, possibly 1.5V. I have yet to see any proof to suggest that 1.55V is safe.

That would be epic self pawnage if this was the case. :laugh:

Can you link me to OCCT?

Edit: Is this the correct one? Link

Yep, that's the one.
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.66/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
Update:

After 50 BSODs and my fist through a wall I'm at 3.45 stable with 1.44v

Multiplier: 15x
FSB: 230MHz

Now I have a concern. Is 1.44v safe for 24/7 usage?
 
Joined
Dec 27, 2007
Messages
555 (0.09/day)
Location
Indiana
System Name Evil Dragon
Processor AMD FX-8320 Vishera @4.7ghz
Motherboard Asus 970 pro gaming Aura
Cooling Corsair Hydro Series H100i V2(fully Lapped). 4 40mm NB/VRM fans. 6 Thermaltake Riing 12 Series fans
Memory 2X8gig GeIL EVO Veloce Series DDR3 1600 @9.9.9.26
Video Card(s) Powercolor Red Devil RX 480 (1400/2100)
Storage PNY XLR8 480gig SSD. Patriot Pyro SE 60gig SSD.
Display(s) ASUS VP228H LED
Case Thermaltake Core V31
Audio Device(s) Onboard Realtek ALC1150 W/Creative Sound Blaster Cinema 2
Power Supply EVGA 850 BQ 110
Keyboard Roccat Isku FX
Software Win 10 Pro
You have to manually set the voltage. Why are you oc'ing the bus tho? Just use the multi, try 18x multi and a 1.4v CPU Voltage. If it's unstable, raise a voltage a little until it is. Then try for 3.7 and so on.

This. With a BE you should be using the Multi to overclock.

On air I personally wouldnt go over 1.5v on the cpu. Although I have read where people are doing 1.55. I am running 3.5 @ 1.50 24/7 and havent had a problem yet. Max temps with all 4 cores at full load has been 63c.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.18/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
no, thats not where you get OCCT!

you get it here, from the people who made it
http://www.ocbase.com/perestroika_en/index.php?Download

its a newer version too. (i have a thing against guru3D, they stole inf. modded drivers i made years ago, and claimed they made them... despite my name being in the inf file)



Not sure how the linpack test goes on AMD, but on intel its far, FAR more stressful than the others... its native x64 as well, which makes a big difference (tests the entire chip, not just the x86 parts)
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.66/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
no, thats not where you get OCCT!

you get it here, from the people who made it
http://www.ocbase.com/perestroika_en/index.php?Download

its a newer version too. (i have a thing against guru3D, they stole inf. modded drivers i made years ago, and claimed they made them... despite my name being in the inf file)



Not sure how the linpack test goes on AMD, but on intel its far, FAR more stressful than the others... its native x64 as well, which makes a big difference (tests the entire chip, not just the x86 parts)

So can anyone verify 1.44v is safe for 24/7 usage?
 
Joined
Dec 27, 2007
Messages
555 (0.09/day)
Location
Indiana
System Name Evil Dragon
Processor AMD FX-8320 Vishera @4.7ghz
Motherboard Asus 970 pro gaming Aura
Cooling Corsair Hydro Series H100i V2(fully Lapped). 4 40mm NB/VRM fans. 6 Thermaltake Riing 12 Series fans
Memory 2X8gig GeIL EVO Veloce Series DDR3 1600 @9.9.9.26
Video Card(s) Powercolor Red Devil RX 480 (1400/2100)
Storage PNY XLR8 480gig SSD. Patriot Pyro SE 60gig SSD.
Display(s) ASUS VP228H LED
Case Thermaltake Core V31
Audio Device(s) Onboard Realtek ALC1150 W/Creative Sound Blaster Cinema 2
Power Supply EVGA 850 BQ 110
Keyboard Roccat Isku FX
Software Win 10 Pro
I have run different AMD CPUs at 1.5 vcore quite safely. They have survived many hours of OCCT Linpack and standard testing.

I dont think 1.44 is that extreme. Especially if your temps are in a safe area....
 
Top