Overclocked my cpu now my pc is dead

[Qu1cZ]

Np

 

[EarthDog]

First, I mean no disrespect to anyone.
The title of this thread just came across as extremely funny to me.
I sincerely say thank you for the laugh, I hope there is nothing serious wrong and people learn from this.

Learn what? Killing CPUs, even when overclocking, takes some skill? lol

I've overclocked and binned more CPUs than most have seen on store shelves... I killed ONE under LN2. By no means am I great or all knowing. I guess I wouldn't call this a lesson learned either.

 

[TheoneandonlyMrK]

Probably accidentally over volted something , Asus has been consistent IMHO and experience.

Going about voltage adjusting in the wrong way can lead to massive core Volt's, I could if I wanted repeat this and demonstrate it repeatedly.

If you set an offset voltage boot, then set a positive auto voltage then reboot it will be high but not mental but if you then decide you personally want to set a max possible Volt's by offsetting say 0.1 the board adds that to its last booted voltage not a stock voltage leading to 1.6+V on the core , I have experienced upto 1.7 while absent mindedly fiddling.

I have complained to Asus support via there forum with no fix on a crosshair V or VII.

I don't think they are alone but now I realized you have a gigabyte board ignore this

 

[freeagent]

Call me old fashioned but.. I thought gigabyte was just as junky as MSI?

 

[eidairaman1]

Until this guy takes the rig to the shop to verify what parts are bad we are just going in circles here...

He truly needs to get a clue.

 

[trickson]

I read it as his words are written.. he thinks the board the OP is using is a "POS". You called that out and suddenly the message changes??

Respectfully, it's sometimes difficult to follow his posts, lol...maybe it's me. Have fun figuring it out though.

I only say it's a POS because it's broken. Hell every time my POS car break down I call it a POS but I still drive it and fix it because I love it. Gigabyte is a great MB maker nothing wrong with them at all. Some times we do get a POS board or hdd or video card it's just the way it goes RMA it and the POS is NO longer a POS it is a Perfect piece of equipment.

 

[Vayra86]

I only say it's a POS because it's broken. Hell every time my POS car break down I call it a POS but I still drive it and fix it because I love it. Gigabyte is a great MB maker nothing wrong with them at all. Some times we do get a POS board or hdd or video card it's just the way it goes RMA it and the POS is NO longer a POS it is a Perfect piece of equipment.

Perfectly Okay Son

 

[Qu1cZ]

Hello stranger

So in bought a RX 5600 XT because i bricked my RX560 and also my cpu apu and i installed the card and turned on my pc it still is on VGA Red light i need help is it a broken RX 5600 XT wat i got or is my cpu that much damaged it wont even see display

 

[eidairaman1]

Hello stranger

So in bought a RX 5600 XT because i bricked my RX560 and also my cpu apu and i installed the card and turned on my pc it still is on VGA Red light i need help is it a broken RX 5600 XT wat i got or is my cpu that much damaged it wont even see display

Please understand this.

You damaged your cpu or motherboard from overclocking, you couldn't boot from it to begin with.

Take your system to a shop for proper troubleshooting, since they will have cpus, motherboards and gpus, monitors, powersupplies to isolate what exactly broke in your system.

By the way you already have a thread.

Overclocked my cpu now my pc is dead

Hello random stranger So i decided to overclock my cpu and my igpu (AMD Ryzen 3 3200g) after that my screen went black so i looked on my motherboard and there was a red light at VGA i tried to cmos and remove battery and did not work do you have have a solution? I have a : -AMD Ryzen 3 3200g...

www.techpowerup.com

 

[Qu1cZ]

So i need to buy i new cpu u say

 

[eidairaman1]

So i need to buy i new cpu u say

I'm not telling you to buy anything, I am telling you to take your entire computer to a shop to verify what is broken before you waste any more money.

Re-read my last comment.

 

[Qu1cZ]

I see

 

[eidairaman1]

I see

I told you in another thread, now go do it.

 

[Kursah]

Merged threads, let's keep the same topics together moving forward please @Qu1cZ

 

[xtreemchaos]

the elite overclocks fine if you have a fan on the vrm, mines run for 18months @4.2 without any problem good cb scores too. rma the board if you can it could be faulty then if the new one dos the same rma the cpu.

 

[eidairaman1]

the elite overclocks fine if you have a fan on the vrm, mines run for 18months @4.2 without any problem good cb scores too. rma the board if you can it could be faulty then if the new one dos the same rma the cpu.

Its quickest if possible to have a shop test and then do the rma.

The person who came here have no additional parts to test with and buying parts just for them to not work is wasteful.

I kept Many 478s back then along with SkT A chips for a reason, then had mobos to test with.

 

[Qu1cZ]

Idk wat is damaged so i'm going to troubleshoot like u ssid

 

[candle_86]

Stop troubleshooting. Don't touch anything, immediately take it to a shop. You can swap parts all day until you find the problem but that's expensive. Even the best of us have had to go to a shop before. Pay for the $99 diagnostic and then let them fix it.

 

[Qu1cZ]

I'm going to send it back to the shop where i buyed it they will look wats the problem

 

[candle_86]

I'm going to send it back to the shop where i buyed it they will look wats the problem

That's the best decision you can make.

 

[ZenZimZaliben]

I didn't read everything and the thread was confusing because it was merged and also a bunch of removed posts..

Have you actually tried resetting the cmos with the jumper as well as removing the battery. Sometimes just removing the battery isn't good enough. You need to ground out the cmos to clear it fully as well as remove the battery. Let it sit for a few minutes with the jumper on then take jumper off and install battery.

 

[Qu1cZ]

I have tried but still it is dead whit the nieuw gpu

Is it normal when i turn on the computer and the fans stop spinning from my rx 5600 xt

 

[eidairaman1]

I have tried but still it is dead whit the nieuw gpu

Is it normal when i turn on the computer and the fans stop spinning from my rx 5600 xt

Your system is fried, next time if you have a problem, take it to the shop.

 

[Qu1cZ]

They tested it and said it was gpu and motherboard problem

 

[eidairaman1]

They tested it and said it was gpu and motherboard problem

Now stick to brand new parts for your own sanity.