kysg
New Member
- Joined
- Aug 20, 2008
- Messages
- 1,255 (0.22/day)
- Location
- Pacoima, CA
System Name | Workhorse lappy |
---|---|
Processor | AMD A6 3420 |
Memory | 8GB DDR3 1066 |
Video Card(s) | ATI radeon 6520G |
Storage | OCZ Vertex4 128GB SSD SATAIII |
Display(s) | 15inch LCD |
Software | Windows 7 64bit |
Just doing some test runs on a sempron le 1150...practically bottom of barrel, after doing some research most I saw was a 2.8ghz oc.
I'm going to do some base work on it and see how high it can go.
looks like multi is locked up in my bios which really ticks me off, HT at best can go to 1000 if necessary.
using OCZ 1066 4gb of ram,
timings
5 CL
5
5
15
25
2t
as listed in cpu z.
voltage at stock sits default 1.3, can max at 1.4 and can lower all the way to 1.25v
chk overdrive and hmm everything chks out fine. cpu fan is aftermarket pushes about 5500RPM's now.
hmm ever since I changed out to this new DFI board, my temp on vid card has gone down I dunno if my fan speed changed at all
(side note)
temps are low for it about 21-28C at best.
Okay gonna drop the mem down to ddr2 400, and try a base OC of 2.6ghz.
okay restarted and came up good, for 2.6ghz,
ram is at 266 for the speed right now.
No pics for this now, but looks like HT is now 1000
FSB is 260 x 10 = 2600
memory timings remain the same.
upped the volt by .25mv in bios.
cpu temp is 23c-28c fluctuates because of cool and quiet not too too bad.
I need to know whats a good step from here. Try for 3.0ghz and up the voltage?? or work on the memory???
I'm going to do some base work on it and see how high it can go.
looks like multi is locked up in my bios which really ticks me off, HT at best can go to 1000 if necessary.
using OCZ 1066 4gb of ram,
timings
5 CL
5
5
15
25
2t
as listed in cpu z.
voltage at stock sits default 1.3, can max at 1.4 and can lower all the way to 1.25v
chk overdrive and hmm everything chks out fine. cpu fan is aftermarket pushes about 5500RPM's now.
hmm ever since I changed out to this new DFI board, my temp on vid card has gone down I dunno if my fan speed changed at all
(side note)
temps are low for it about 21-28C at best.
Okay gonna drop the mem down to ddr2 400, and try a base OC of 2.6ghz.
okay restarted and came up good, for 2.6ghz,
ram is at 266 for the speed right now.
No pics for this now, but looks like HT is now 1000
FSB is 260 x 10 = 2600
memory timings remain the same.
upped the volt by .25mv in bios.
cpu temp is 23c-28c fluctuates because of cool and quiet not too too bad.
I need to know whats a good step from here. Try for 3.0ghz and up the voltage?? or work on the memory???