Overclocking help

[landstad]

Use HWinfo for monitoring and I don't get the screen-shots all of them are during idle. Post one during load

Okey. I can't cause I get instant blue screen,

See on this picture if my settings are rigth, or i have done something wrong.

EDIT: 1400:

Do the hw info save the monitoring info when the computer goes into bsod ?
Do I have to configure it ?
or do i have to take print screen ?


Sorry if i ask questions I allready have asked and for stupid questions, better safe than sorry

 

[krusha03]

That means your overclock is not stable. Try reducing the clock a bit. Also press on the sensors button to get the actual temperatures and voltages

 

[landstad]

That means your overclock is not stable. Try reducing the clock a bit. Also press on the sensors button to get the actual temperatures and voltages

I'll try 3,8ghz then. Could you tell what is what of those temprature indications

 

[landstad]

Manage'd to get 3,7 ghz once again... 18.5x multiplier 1.408voltage..
Everything else on stock.

If i'm gonna go higher I think i need to read alot more, to get an better understandig of all this so much... Think acctually i have said that before but....

Ran prime95, Small test 20 minutes, second test 20 minutes, blend for an hour.. now i'm gonna test with some gaming, guess it will work out like last time, no bsod what so ever.
vrm heatsink temprature was never over 58c, CPU was stable at 50c

How do i read the CSV file from Sensor monitoring(hwmonitor) ?

Thanks for all help in this thread guys,
appreciate it