• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Pressure washing fitting on watercool loop for temp fix?

shevanel

New Member
Joined
Jul 27, 2009
Messages
3,464 (1.12/day)
Likes
396
Location
Leesburg, FL
#1

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (5.88/day)
Likes
3,682
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
#2
If it didn't cross-thread, and it doesn't leak, it's fine. Just keep an eye out for any signs or corrosion.
 

sneekypeet

Super Moderator
Staff member
Joined
Apr 12, 2006
Messages
24,732 (5.74/day)
Likes
9,520
System Name His
Processor Intel i9 7920X
Motherboard Asus Prime X299 Deluxe
Cooling Corsair H150i PRO RGB
Memory G.Skill TridentZ RGB 32GB @ 3600MHz
Video Card(s) nVidia GTX 1080ti SLI with EVGA Hybrid coolers.
Storage Samsung 960 Pro / Crucial MX300 750GB / Seagate 1TB Spinner
Display(s) Sony 43" 4K 60hz
Case Cooler Master Cosmos C700P (Inverted Layout)
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vega's
Power Supply Thermaltake TPSG 1050W
Mouse Always Changing
Keyboard Always Changing
Software Windows 10 Pro 64
#4
I may be looking at this wrong, but I think that fitting is gonna take a ton of teflon tape to seal (and no washer). Second point is the length of the threads, careful you dont screw it in too far and restrict the flow. As Wile e says IF you can get it not to leak you should be fine.
 
Joined
Oct 30, 2009
Messages
1,362 (0.45/day)
Likes
633
Location
TX
System Name Beast, little beast
Processor Core i7 2600K 4.5GHZ 24/7, Core i7 Xeon6 core 3.6GHZ 24/7
Motherboard Gigabyte Z68X-UD4-B3 1155Sckt, EVGA X58 sckt 1366
Cooling H80, H100
Memory 24 gigs DDR3 1600Mhz Gskill RipJaws,12 gigs DDR3 1600Mhz Gskill Ripjaws
Video Card(s) 1 Nvidia 670 eVGA FTW, 1 Nvidia 580 eVGA
Storage 1- WD Black 640GB, 1X Samsung 1.5TB, 2 X 160 WD Veloc Raptors Raided
Display(s) Hanns-G 28" 1920X1200, Acer 24" 1920X1200
Case rig#1 Dismatech test bench, rig#2 Made By Bill Tech Bench
Audio Device(s) onboard
Power Supply Antec 1000 Watt, PC power&cooling 850 watt
Software both Rig's, Win7 64Bit
Benchmark Scores rig #1 4.8GHZ @ 1.375 Volts. running 4.5GHZ 1.272 Volts 24/7. Rig #2 4.6GHZ @ 1.3 Volts 24/7.
#6
You will be ok.. Just try not to leave it in there to long... it will start to break down from the coolant on the inside of the fitting and get particles in your system or loop. If you are using distilled water that has no impurities in it, the water will actually try to get them from your fitting since its not brass or stainless. It takes awhile to do this but believe me it will do it. :)