• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Prevent damage to electronics from water

Joined
Oct 9, 2010
Messages
1,549 (0.31/day)
Location
Kolkata, India
System Name Coffee | Maximus
Processor Intel Core i7 9700K @ 5.2 GHz with AVX, 4.8 GHz cache clock | i7 9700KF @ 5.0 GHz/4.7 GHz cache
Motherboard ASUS Maximus X Formula | ASUS Maximus VIII Ranger (modded BIOS for Coffee Lake)+TPM2.0 module
Cooling Cooler Master ML240 Illusion | Cooler Master ML120L RGB
Memory 2*16 GB (32 GB) Kingston Fury Beast @3600 MHz CL17 | 4*8 GB (32 GB) HyperX Fury @3200 MHz CL14
Video Card(s) Zotac RTX 3070 8 GB Twin Edge | Galax RTX 2060 Super 8 GB
Storage Samsung PM981a 1TB NVMe+480GB SATA SSD+2 TB HDD | Crucial P5 1TB, Crucial P1 500GB+2.5TB HDDs
Display(s) LG OLED 55 G3, 4K 120 Hz, VRR, ALLM, GSync, FreeSync | Samsung 43AU9070 4K TV, VRR, ALLM
Case Corsair Crystal 460X RGB | Lianli Lancool 215
Audio Device(s) Creative Sound Blaster Z SE | Realtek ALC1150 (Supreme FX)
Power Supply ASUS ROG Strix 750G (80+ Gold) | Cooler Master MWE 650 V2 (80+ Bronze)
Mouse Cooler Master MM731 19000 DPI gaming mouse
Keyboard Cooler Master CK721 65% mechanical gaming keyboard (tactile)
Software Windows 11 Pro x64 |Windows 11 Pro x64
Benchmark Scores Cinebench R20 MT 4200,ST 547 CPU-Z MT 4871, ST 620 | R20 MT - 4158, ST - 534, CPU-Z MT 4798, ST 603
Hi everyone, this is an article to make you aware of what to do if your phone or laptop or any electronic equipment is spilled with water.
The first thing you should do is remove the power source. Remove any battery or adapter and do not attempt to connect it until the set is ABSOLUTELY DRY. Remember water alone never damage electronics. It is water + electricity that damages it. So if you are quick enough to remove the power source of the device and manage to clean it perfectly, there is 99% chance that the electronic part of the device will remain absolutely as it was before the damage.

The thing that may get immediately damaged is the LCD. But if you are careful, there are ways too. There are ways by which you can disassemble the layers of the LCD and wipe them off thus drying them which will make them almost good as new. I will write that tutorial later and images will be shown too.

In the unlikely event that water enters a device and power is still there there is a 50-50 chance of the device being alive or not. Perhaps you notice the spilling 5 minutes after it is done and remove power. After drying the unit, you may find performance degradation, excessive battery drain and malfunction. Well if any major IC is damaged then you are out of luck because the cost for repairing the device will be almost enough to get you a new PCB or motherboard. The thing is sometimes, ICs remain intact. The thing which happens is sediments and minerals from water leave a residue on electrolysis not to mention oxidizes the metal also. For the oxidizing part, nothing needs to be done. But for the sediment and mineral part- If you ask me, they are enough to cause malfunction as they are fair conductors.

Example of damage-


As you can see in the perimeter of the connector, some white stuff is there. Those are nothing but sediments and minerals of water that are enough to cause short circuits.

So the thing is clean the PCB with IsoPropyl alcohol and preferably have it reheated by a hot air gun(a local repair shop can do this for you).

Hope this may be of some help.
All the best. :)
 
Last edited:
Joined
Mar 12, 2009
Messages
1,075 (0.20/day)
Location
SCOTLAND!
System Name Machine XV
Processor Dual Xeon E5 2670 V3 Turbo unlocked
Motherboard Kllisre X99 Dual
Cooling 120mm heatsink
Memory 64gb DDR4 ECC
Video Card(s) RX 480 4Gb
Storage 1Tb NVME SSD
Display(s) 19" + 23" + 17"
Case ATX
Audio Device(s) XFi xtreme USB
Power Supply 800W
Software Windows 10
I run some Rc boats and we eventually got sick of the electronics getting damp and flakin out so I ended up coating all the pcb's with epoxy so that the water can never touch any of the IC's

Why can't they do this with phones?


But for your every day electronics that take a swim.
Time is against you because electrolysis starts the moment It gets wet and gradually corrodes away the metal so the faster you dry it the less chance of damage.

1. take the battery out !!! People with iPhones should go to a repair shop immediately as you cannot remove the battery without specialist tools.


2. If you can strip it down open it up and dry it out properly before you put the battery back in and power it on. If you cannot strip it down take it to your local phone repair shop they should strip it down and dry it before they put the battery back
 
Last edited:

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
18,851 (3.08/day)
Location
UK\USA
Processor AMD 3900X \ AMD 7700X
Motherboard ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling D15
Memory Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s) eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s) Samsung 1080P \ LG 43UN700
Case Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s) Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard Logitech K120 \ Wooting Two HE
Benchmark Scores Meh benchmarks.
you could be prepared and get some Gardner Bender LTB-400 which drys like a rubber coating over the electronics.


I run some Rc boats and we eventually got sick of the electronics getting damp and flakin out so I ended up coating all the pcb's with epoxy so that the water can never touch any of the IC's

Why can't they do this with phones?


But for your every day electronics that take a swim.
Time is against you because electrolysis starts the moment It gets wet and gradually corrodes away the metal so the faster you dry it the less chance of damage.

1. take the battery out !!! People with iPhones should go to a repair shop immediately as you cannot remove the battery without specialist tools.


2. If you can strip it down open it up and dry it out properly before you put the battery back in and power it on. If you cannot strip it down take it to your local phone repair shop they should strip it down and dry it before they put the battery back

Yeah i use the above for RC cars same kinda rules really and you need to be careful what you cover as you need to allow some parts to keep cool.
 

qubit

Overclocked quantum bit
Joined
Dec 6, 2007
Messages
17,866 (3.00/day)
Location
Quantum Well UK
System Name Quantumville™
Processor Intel Core i7-2700K @ 4GHz
Motherboard Asus P8Z68-V PRO/GEN3
Cooling Noctua NH-D14
Memory 16GB (2 x 8GB Corsair Vengeance Black DDR3 PC3-12800 C9 1600MHz)
Video Card(s) MSI RTX 2080 SUPER Gaming X Trio
Storage Samsung 850 Pro 256GB | WD Black 4TB | WD Blue 6TB
Display(s) ASUS ROG Strix XG27UQR (4K, 144Hz, G-SYNC compatible) | Asus MG28UQ (4K, 60Hz, FreeSync compatible)
Case Cooler Master HAF 922
Audio Device(s) Creative Sound Blaster X-Fi Fatal1ty PCIe
Power Supply Corsair AX1600i
Mouse Microsoft Intellimouse Pro - Black Shadow
Keyboard Yes
Software Windows 10 Pro 64-bit
The first thing you should do is remove the power source.

Exactly. I've seen someone drop their phone into a puddle, pull it out, give it a shake, see it's still working and look at me like I'm nuts when I said he should remove the battery and thoroughly dry it out. Moron.

It's also one of the many reasons why I despise Apple for intentionally limiting their products in so many ways. No easy way to remove that battery in the case of liquid spill, is there? By the time you've done it, the phone will be ruined from the electrolysis and also likely by your frantic efforts to pull it apart.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.61/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
peh ive taken iphones apart completely and put them back together no issue


I run some Rc boats and we eventually got sick of the electronics getting damp and flakin out so I ended up coating all the pcb's with epoxy so that the water can never touch any of the IC's

Why can't they do this with phones?


But for your every day electronics that take a swim.
Time is against you because electrolysis starts the moment It gets wet and gradually corrodes away the metal so the faster you dry it the less chance of damage.

1. take the battery out !!! People with iPhones should go to a repair shop immediately as you cannot remove the battery without specialist tools.


2. If you can strip it down open it up and dry it out properly before you put the battery back in and power it on. If you cannot strip it down take it to your local phone repair shop they should strip it down and dry it before they put the battery back
 

qubit

Overclocked quantum bit
Joined
Dec 6, 2007
Messages
17,866 (3.00/day)
Location
Quantum Well UK
System Name Quantumville™
Processor Intel Core i7-2700K @ 4GHz
Motherboard Asus P8Z68-V PRO/GEN3
Cooling Noctua NH-D14
Memory 16GB (2 x 8GB Corsair Vengeance Black DDR3 PC3-12800 C9 1600MHz)
Video Card(s) MSI RTX 2080 SUPER Gaming X Trio
Storage Samsung 850 Pro 256GB | WD Black 4TB | WD Blue 6TB
Display(s) ASUS ROG Strix XG27UQR (4K, 144Hz, G-SYNC compatible) | Asus MG28UQ (4K, 60Hz, FreeSync compatible)
Case Cooler Master HAF 922
Audio Device(s) Creative Sound Blaster X-Fi Fatal1ty PCIe
Power Supply Corsair AX1600i
Mouse Microsoft Intellimouse Pro - Black Shadow
Keyboard Yes
Software Windows 10 Pro 64-bit
But the battery was soldered in and glued down, no? That's not trivial.
 
Joined
Mar 12, 2009
Messages
1,075 (0.20/day)
Location
SCOTLAND!
System Name Machine XV
Processor Dual Xeon E5 2670 V3 Turbo unlocked
Motherboard Kllisre X99 Dual
Cooling 120mm heatsink
Memory 64gb DDR4 ECC
Video Card(s) RX 480 4Gb
Storage 1Tb NVME SSD
Display(s) 19" + 23" + 17"
Case ATX
Audio Device(s) XFi xtreme USB
Power Supply 800W
Software Windows 10
Exactly. I've seen someone drop their phone into a puddle, pull it out, give it a shake, see it's still working and look at me like I'm nuts when I said he should remove the battery and thoroughly dry it out. Moron.

It's also one of the many reasons why I despise Apple for intentionally limiting their products in so many ways. No easy way to remove that battery in the case of liquid spill, is there? By the time you've done it, the phone will be ruined from the electrolysis and also likely by your frantic efforts to pull it apart.


Yea the amount of people I meet that drop their phones down the toilet, stick it in a bag of rice for a few hours then when it doesn't come on right away they plug the charger in over night thinking the battery Has went flat.

Then when that doesn't work they bring it to the shop where we remove the back and let the water pour out.
 

de.das.dude

Pro Indian Modder
Joined
Jun 13, 2010
Messages
8,754 (1.74/day)
Location
Stuck in a PC. halp.
System Name Monke | Work Thinkpad| Old Monke
Processor Ryzen 5600X | Ryzen 5500U | FX8320
Motherboard ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4
Cooling 240mm Rad | Not needed | hyper 212 EVO
Memory 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600
Video Card(s) Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB
Storage Samsung 980 nvme (Primary) | some samsung SSD
Display(s) Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L
Case Ant Esports Tempered case | Thinkpad | Antec
Audio Device(s) Logitech Z333 | Jabra corpo stuff
Power Supply Corsair RM750e | not needed | Corsair GS 600
Mouse Logitech G400 | nipple
Keyboard Logitech G213 | stock kb is awesome | Logitech K230
VR HMD ;_;
Software Windows 10 Professional x3
Benchmark Scores There are no marks on my bench
if your stuff gets wet, get some distilled water and wash it throughly. then place it in a rice bag to dry. good as new.

the distilled water will dilute away the salts.

simple.

Or just coat your stuff with a nice layer of enamel clear coat beforehand XD
 
Top