beachbum86
New Member
- Joined
- Sep 29, 2006
- Messages
- 102 (0.02/day)
- Location
- Oh no, last time i listed this a dude showed up at
Processor | P4 3.2ghz pressy |
---|---|
Motherboard | Abit ic7 max-3 |
Cooling | All PolarFlo TT series w/ some DD maze4 blocks too |
Memory | 2x 512mb G-skill pc4400 TCCD |
Video Card(s) | X850XT PE |
Storage | 2x 300gb sATA maxtor |
Display(s) | CTX 17" lcd |
Case | Custome modded Koolance pc2-650 |
Audio Device(s) | standard sound blaster |
Power Supply | kingwin ABT-600cw |
Software | XP pro, Macromedia 8 suite, SwishMax, PS CS2....etc..etc |
Hiya mates, I'm new to this forum and would like to share some of my latest work. this mod started about the middle of last year and has been an on and off project. Recently i tried to finish everything to enter in a mod contest at PDXLAN (largest lan on the west coast) but was unable to do to parts not ariving in time. Since the worklog is is over 300 posts I'll do a flash foward on the progress. The case started as a stock GlobalWin ycc 61f1 server case, very roomy and feature rich aluminum case.
A review of the case HERE.
then after a lil elbow grease i now have this-
If you are interested in the entire worklog and if its ok from the mods/admins here you can visit it here. Its on my website too but i havnt updated that in a while. Any questions and/or critisizm is more than welcome I will try and keep this as up to date as i have time for, right now the case is about 90% finished...
then after a lil elbow grease i now have this-
If you are interested in the entire worklog and if its ok from the mods/admins here you can visit it here. Its on my website too but i havnt updated that in a while. Any questions and/or critisizm is more than welcome I will try and keep this as up to date as i have time for, right now the case is about 90% finished...