Qiyida x99 M9 motherboard does not recognize my rx570

[Silencio]

Hi all and thanks for accepting me to the forum, I have a Qiyida x99 M9 motherboard but not recognize my rx 570 video card. Any help to solve this problem?
With a gt710 works well


Thanks.

All the best.

 

[Bill_Bright]

Please fill out your TPU System Specs so we know what hardware we are talking about - to include the power supply (are you sure you connected all the required power connections?).

 

[kilo]

Full system specs please. Include Bios revision.

 

[Silencio]

motherboard: Qiyida x99 M9
processor: xeon 2630 v4
ram: 16GB 2400mhz
m2 ssd and 3 hard disks
Bios version I don't know
OS: Windows 10 updated.
power supply: EVGA 750

 

[FreedomEclipse]

Found your thread on LTT. Put it down to the 570 not being compatible with the chinesium bios. Other people have had issues running the same card on older more legacy non-uefi setups.

I found this short guide on reddit. Might not fix your problem given the chinesium bios but its probably your best chance at getting the 570 working. If it doesnt work then all i can do is suggest you find an older card that was released in the X99 era or one that still has a legacy bios installed.

Not a whole lot you can do otherwise. You have a chinesium product. They are going to have issues.

 

[Silencio]

I have CSM disabled, secure boot enabled and fast boot enabled. When attach the rx570 the motherboard makes a sound, 5 beeps and another sound.

 

[K7SEM]

- Perform Clear CMOS or just remove the battery about a minute
- Insert GPU until fully reseated with a screw and screwdrivers and tighten enough
- Repeat those steps until monitor get a signal

 

[micropage7]

you put review on this one?
here

could be some incompatibility, and you may not find any bios update to fix that

 

[Speedyblupi]

If you need to flash the BIOS, I'd recommend looking at Miyconst's database. I can't say for sure, but there is a good chance that it includes the BIOS file you need. The M9 is not included in the list, but most Chinese X99 motherboards are sold under multiple different names, and there may be a BIOS for the same motherboard with a different name which would work.

Mi899/src/Mi899.Data at master · miyconst/Mi899

Tool set for Chinese X99 motherboards. Contribute to miyconst/Mi899 development by creating an account on GitHub.

github.com

Flashing the BIOS might not be necessary though, if you're able to go into the BIOS (using your GT 710) and find a setting to enable UEFI boot mode. You may need to reinstall Windows for UEFI to work after doing this.

 

[Silencio]

If you need to flash the BIOS, I'd recommend looking at Miyconst's database. I can't say for sure, but there is a good chance that it includes the BIOS file you need. The M9 is not included in the list, but most Chinese X99 motherboards are sold under multiple different names, and there may be a BIOS for the same motherboard with a different name which would work.

Mi899/src/Mi899.Data at master · miyconst/Mi899

Tool set for Chinese X99 motherboards. Contribute to miyconst/Mi899 development by creating an account on GitHub.

github.com

Flashing the BIOS might not be necessary though, if you're able to go into the BIOS (using your GT 710) and find a setting to enable UEFI boot mode. You may need to reinstall Windows for UEFI to work after doing this.

Thanks, flashed the bios and still have the problem: https://github.com/miyconst/Mi899/issues/117

The original bios are x99-D4

have CSM disabled, secure boot enabled and fast boot enabled

I think this is UEFI mode but not works.

 

[FreedomEclipse]

Thanks, flashed the bios and still have the problem: https://github.com/miyconst/Mi899/issues/117

The original bios are x99-D4


I think this is UEFI mode but not works.

Probably not but is there an option to switch to legacy mode in your x99 bios?

Like I said. Chinesium product. Youre going to have to work around it to make it work or buy a board made by a more mainstream/reputable company if you really want to use your 570.

Its one or the other, you cant have both unless there is big community support behind it making custom bioses.

 

[VuurVOS]

@Silencio
Which brand RX570 do you have? Maybe a different vbios can solve your problem?

 

[Silencio]

@Silencio
Which brand RX570 do you have? Maybe a different vbios can solve your problem?

I have a msi 570 8gb armor oc.

 

[VuurVOS]

I have a msi 570 8gb armor oc.

Can you see the part number on the memory? Can you share it with us?

 

[Silencio]

I flashed the bios again and put in CSM UEFI mode, now with my gt710 I can't see the post/bot sequence. But the rx570 still no works.

well, I will be use it with the gt710
Thanks to all.

I bought a Jxz Radeon Rx580 (2048sp) hope this card works well.

All the best.

 

[VuurVOS]

I bought a Jxz Radeon Rx580 (2048sp) hope this card works well.

Can you make a picture of the PCB of the graphics card?

 

[Silencio]

Can you make a picture of the PCB of the graphics card?

When the new gpu arrive to my home.
Thanks.
All the best.

 

[VuurVOS]

When the new gpu arrive to my home.
Thanks.
All the best.

Sorry, I misunderstood

 

[Silencio]

Finally, I put for sale the Chinese motherboard, the new graphics card not work with the board. I back to my Athlon build and everything works good.

Can you make a picture of the PCB of the graphics card?

I found this topic, but I don't understand how to modify correctly the bios.

How to disable UEFI for legacy only boot on recent AMD Radeon GPUs

Hello, Recent AMD GPUs have a hybrid ROM which contains two images: A legacy video BIOS (vBIOS) image and a compressed graphics output protocol (GOP) driver image. In theory this allows the card to work well on both legacy systems (which will use the vBIOS image) and more modern systems with a...

winraid.level1techs.com

This is the original bios of the 580

 

[VuurVOS]

Finally, I put for sale the Chinese motherboard, the new graphics card not work with the board. I back to my Athlon build and everything works good.


View attachment 343361

View attachment 343374View attachment 343375View attachment 343376View attachment 343377View attachment 343378

I found this topic, but I don't understand how to modify correctly the bios.

This is the original bios of the 580

This bios has no uefi support. Try at own risk:

AMD RX 580 VBIOS

8 GB GDDR5, 1244 MHz GPU, 1750 MHz Memory

www.techpowerup.com

 

[Silencio]

This bios has no uefi support. Try at own risk:

AMD RX 580 VBIOS

8 GB GDDR5, 1244 MHz GPU, 1750 MHz Memory

www.techpowerup.com

 

[Keullo-e]

You need to force flash it most likely.

 

[Silencio]

Successfully flashed, now I will test with the Chinese board.


Back to the original saved bios because the Chinese motherboard not recognize the video card.

Well, thanks to all.


All the best.