• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Radeon X1300 Voltmods

W1zzard

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
28,753 (3.75/day)
System Specs
Processor Ryzen 7 5700X
Memory 48 GB
Video Card(s) RTX 4080
Storage 2x HDD RAID 1, 3x M.2 NVMe
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 10 64-bit
Last edited:
Hi,

First post here...
We have a thread over at XS about v-modding the X1300 (and 1600 on same PCB)....a couple of us have been testing out these cards with varying amount of Vgpu for a couple weeks now. With the PRO version of the X1300, I believe it will be better to use a 5K pot.

Jay

EDIT: Well maybe not any better...but at 5 K you get hardly any increase to stock Vgpu.


also, PRO cards have two RT9232A ICs. It has been pointed out to me that it differs from the RT9232.
 
Last edited:
nice cam
 
is there any difference in the mods for those 9232a ics ? You think 5k is better? I can update the article, np

ya the images turned out pretty nice, also it shows how much of a quality difference is between shooting RAW and JPG on my cam (Canon Powershot Pro1). the VDCC pics were shot in RAW, the MVDDC pics in JPG.. difference light night and day I would say.
 
Last edited:
LOL, No I suppose the 5K isn't really any better. If someone has the pro model with stock measurements of 1.315Vgpu and approx. 151 Ohms across res or from pins 5 to 7......might be a good idea to pre-set the 10K pot to approx. 5 K Ohms beforehand. Use whatever is handy. :toast:

EDIT: W1zzard, Were those pics of a pro card? If so, what model? Just curious because the Sapphire brand has a RT9232A IC for both Vgpu and Vdd.

Thanks,

Jay
 
i would say canon's DSLR like
 
Hello, this is my first post, sorry my bad english.
Hello Everybody.... I'm reading this forums a lot of time ago..

I'm writing you now because I've got a dude..

I'm watching this mod for X1600pro in a sapphire card,
but I don't know if I mod I have to make both mods,
i'm saying--> to Volt mod my vga-card i have to make pencil and potentiometers mod.
I have to make just one type of mod to "volt-mod" my vga?...
please tell me something about.

Thanks.
 
kapps said:
Hello, this is my first post, sorry my bad english.
Hello Everybody.... I'm reading this forums a lot of time ago..

I'm writing you now because I've got a dude..

I'm watching this mod for X1600pro in a sapphire card,
but I don't know if I mod I have to make both mods,
i'm saying--> to Volt mod my vga-card i have to make pencil and potentiometers mod.
I have to make just one type of mod to "volt-mod" my vga?...
please tell me something about.

Thanks.
Click to expand...
Me too want to ask the same question. Should we do both potensio and pencil mod? Or just do potensio mod and forget about pencil mode, or vice versa?

Another question, does pencil mod will degrade/not accurate time after time?

Thanks!

Regards,
Arto.
 
I <3 my canon DSLR. Digital rebel XT. nice pics of those resistors and such.

Im getting an X1300 for my sisters computer, but its AGP, is there any similarity in voltmods on this card? or are they different?
 
Now this should sound a bit funny but I have a X1300 pro, what exactly is this mod useful for? Over clocking stability?
 
You must log in or register to reply here.
Back
Top