• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Rf-fulltwr

cdawall

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,683 (4.02/day)
Location
Houston
System Specs
System Name Moving into the mobile space
Processor 7940HS
Motherboard HP trash
Cooling HP trash
Memory 2x8GB
Video Card(s) 4070 mobile
Storage 512GB+2TB NVME
Display(s) some 165hz thing that isn't as nice as it sounded
Well I figured it is time to make a new thread for my age old rocketfish Lian Li full tower case. I found my ancient (848 day since last post) original build of it, but felt it simpler and cleaner to start a new thread off and link in pics.

cdawall said:
list of watercooling parts
  • DTek Fuzion V1 (i want one of fits tops for it)
  • 1/2 ID x 5/8 OD black tubing
  • laing D5 vario (MCP655v)
  • laing D4 (MCP650)
  • 3x DD maze 4 GPU
  • 14x Yateloon High speed 120mm fans
  • MCR420
  • MCR320
  • bitspower 3.5" drivebay res.
  • DD brass fill/drain port


PICS

http://img.techpowerup.org/100615/DSCF3098.jpg
http://img.techpowerup.org/100616/DSCF3099.jpg

before i did anything to it

http://img.techpowerup.org/100616/DSCF3100.jpg
http://img.techpowerup.org/100616/DSCF3101.jpg

MCR420

http://img.techpowerup.org/100616/DSCF3102.jpg
http://img.techpowerup.org/100616/DSCF3103.jpg


top of the case marked up to be dremel'd out

http://img.techpowerup.org/100616/DSCF3104.jpg
http://img.techpowerup.org/100616/DSCF3105.jpg

looks pretty :)

http://img.techpowerup.org/100616/DSCF3106.jpg
http://img.techpowerup.org/100616/DSCF3108.jpg
http://img.techpowerup.org/100616/DSCF3109.jpg
http://img.techpowerup.org/100616/DSCF3110.jpg

marking/installing for the fill/drain port

http://img.techpowerup.org/100616/DSCF3107.jpg
http://img.techpowerup.org/100616/DSCF3112.jpg

PSU is mounted sideways to fit the MCR320 :D

http://img.techpowerup.org/100617/DSCF3133.jpg

The original loop

http://img.techpowerup.org/100617/DSCF3135.jpg

http://img.techpowerup.org/100617/DSCF3136.jpg

http://img.techpowerup.org/100617/DSCF3137.jpg

http://img.techpowerup.org/100617/DSCF3138.jpg

http://img.techpowerup.org/100617/DSCF3139.jpg

~

http://img.techpowerup.org/100617/DSCF3140.jpg

http://img.techpowerup.org/100617/DSCF3141.jpg

http://img.techpowerup.org/100617/DSCF3142.jpg

http://img.techpowerup.org/100617/DSCF3144.jpg

http://img.techpowerup.org/100617/DSCF3143.jpg

http://img.techpowerup.org/100617/DSCF3145.jpg

http://img.techpowerup.org/100618/DSCF3149.jpg

~~

http://img.techpowerup.org/100619/DSCF3160.jpg

http://img.techpowerup.org/100619/DSCF3161.jpg

http://img.techpowerup.org/100619/DSCF3162.jpg

http://img.techpowerup.org/100619/DSCF3163.jpg

http://img.techpowerup.org/100619/DSCF3164.jpg

http://img.techpowerup.org/100619/DSCF3165.jpg

http://img.techpowerup.org/100619/DSCF3166.jpg

http://img.techpowerup.org/100619/DSCF3167.jpg

ITERATION 2 of the loop

list of watercooling parts
  • DTek Fuzion V1 medium quad core insert
  • 1/2 ID x 3/4 Double wall braided tubing
  • laing D5 vario (MCP655v)
  • laing D4 (MCP650)
  • MCR420QP+MCR220QP-STACK
  • MCR320QP
  • bitspower 3.5" drivebay res.
  • DD brass fill/drain port

http://img.techpowerup.org/110125/2011-01-25_18-38-43_886.jpg

http://img.techpowerup.org/110125/2011-01-25_18-38-24_519.jpg

New fans for the loop 255CFM Nidec's and Delta's

http://img.techpowerup.org/110207/2011-02-07_16-24-53_636.jpg

http://img.techpowerup.org/110207/2011-02-07_16-25-08_753.jpg

http://img.techpowerup.org/110207/2011-02-07_16-25-20_901.jpg
Click to expand...

Finally were it sits now

20121012_134039.jpg


20121012_134042.jpg


20121012_131854.jpg


20121014_123641.jpg


20121014_123701.jpg


list of watercooling parts
  • DTek Fuzion V1 medium quad core insert
  • 2xDD-GTX470 blocks
  • 1/2 ID x 3/4 PrimoChill PrimoFlex Red tubing<--Need to order
  • laing D5 vario (MCP655v)
  • laing D4 (MCP650)
  • MCR420QP+MCR220QP-STACK
  • 2x120x38mm Ultra Kaze's+4x120x38mm Nidec Beta V's+4x120x25mm Yate Loon High's
  • MCR320QP
  • 6x120x25mm Yate Loon High's
  • XSPC Dual Laing D5 Dual Bay res <--Need to order
  • DD brass fill/drain port
 
Nice, hopefully someday I will learn how to watercool, until then, my Noctua beast will have to do.
 
Oh and to put my highend Nidec's into perspective static pressure is 35.88 mmH2O, a Swiftech Helix is 2.29 mmH20 and an Ultra Kaze 3K is 6.05 mmH2O...
 
Looking at some dualie boards from AMD as well for the refresh of this particular rig...

Asus KGPE-D16 ~$380

2xOpty 6128 (8 core) $110ea

~$600
 
cdawall said:
Looking at some dualie boards from AMD as well for the refresh of this particular rig...

Asus KGPE-D16 ~$380

2xOpty 6128 (8 core) $110ea

~$600
Click to expand...

Nice :D

Any particular reason, or just because you can? :D
 
Righto so ended up ordering a CHVF from the egg open box. Ended up being DOA. No big deal since the egg was out of them board is getting RMA'd through Asus. Until then I wanted to go ahead and get all of the watercooling parts, fans and cable management hashed out.

The big rad. Swifty MCR420QP+MCR220QP-STACK, using the clear fan housings as a shroud they are hollowed. The fans used for the push/pull of the stacked rads are Nidec Beta V VA450DC 3.3A models and will be used at 7V.

20121117_015632.jpg


20121117_015643.jpg


Installed in the case with plenty of room for a single 5.25" ODD and possible a fan controller or pair of temp sensors undecided at this point

20121117_030358.jpg


20121117_030514.jpg


20121117_030708.jpg


2x Skythe Ultra Kaze 3000RPM

20121117_030717.jpg


Found out that in between the front case panel and case I could fit a 120x25mm fan. Installed a red LED Coolermaster SickleFlow as an intake.

20121117_024811.jpg


Very unobtrusive red glow from them.

20121117_025126.jpg


20121117_025150.jpg


Dual Laing D4/D5 pumps installed in series

20121117_025140.jpg


3.5" white acetal bay res

20121117_030611.jpg


D-Tek Fuzion V1 block with a medium insert.

20121117_030730.jpg


Full assembly luckily no PCB sag out of these cards. Ram is installed to test height issues will be using 4x4GB of Wintec ONE instead of the 2x2GB kit of G.Skill shown.

20121117_030542.jpg


That is another Skythe Ultra Kaze 3000RPM this one as an intake. With as high CFM as the exhaust through the top is had to make everything else an intake or I start to starve the case for air.

20121117_030551.jpg


I will be removing the top layer of 120x25mm case fans from my case top (not pictured) to swap with a simple 480 radiator grill. Plenty of CFM pushing through them from inside the case no need to blemish the lid.

Aquacomputer

Phobya Bricky

Phobya Stripes

Phobya Hex
 
Last edited:
That is one epic rig cdawall great job :rockout:

dem rads :twitch:, btw i liked the Hex phobya one
 
Doc41 said:
That is one epic rig cdawall great job :rockout:

dem rads :twitch:, btw i liked the Hex phobya one
Click to expand...

Thanks I found the Hex one on ebay so hopefully I can snag a good price on it.
 
Last edited:
subd.
 
20121203_181801[1].jpg
 
Looks nice :toast:
hows it goin so far
 
Doc41 said:
Looks nice :toast:
hows it goin so far
Click to expand...

Just waiting on my CHVF to show back up to get everything installed and temps. :laugh:
 
You must log in or register to reply here.
Back
Top