- Joined
- Aug 18, 2007
- Messages
- 1,037 (0.17/day)
System Name | mine |
---|---|
Processor | 2600k@5.2ghz 1.41 vcore |
Motherboard | asrock z77 OC Formula |
Cooling | pa120.3, apogee HD, mcp655 pump |
Memory | 16gigs ddr3 1600mhz sammy's @ 1886 |
Video Card(s) | evga gtx470 under water on a seperate loop |
Storage | Crucial M4 128gig SSD |
Display(s) | HP 2511x 25inch led |
Case | none ATM |
Audio Device(s) | onboard |
Power Supply | PC Power & Cooling 750watt seasonic x-1250watt(dead) |
Software | win 8 pro 64bit |
i bought a swiftech h20-220 ultra kit, to cool my q6600. installed it tonight, pretty straight forward install. nothing too complicated, except. if you guy's think the antech 900 sucks for wire management. try hose management. i did eventually get it all hooked up.
i plugged the pump into an open molex on my secondary pc next to my main pc. just letting it run now and checking for leaks. 2.5 hours so far so good. altho with the hoses so hard to slide on to the barbs. i dont see how it could leak.
i got my quad up to 3.9 on air, but the temps were running almost 70c on full load. i really hope to break 4.0 or at least get it close for 24/7 use. no real reason just bragging rights i suppose.
wish me luck. i'll update you all tomorrow after turkey dinner.
i plugged the pump into an open molex on my secondary pc next to my main pc. just letting it run now and checking for leaks. 2.5 hours so far so good. altho with the hoses so hard to slide on to the barbs. i dont see how it could leak.
i got my quad up to 3.9 on air, but the temps were running almost 70c on full load. i really hope to break 4.0 or at least get it close for 24/7 use. no real reason just bragging rights i suppose.
wish me luck. i'll update you all tomorrow after turkey dinner.