• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Share your AIDA 64 cache and memory benchmark here

67200MB/s max memory throughput (that's based on math from 4200MHz effective, 128-bit bus and dividing by 8 to get bytes instead of bits).
AIDA64 scores : 70781MB/s read, 65559MB/s write and 71049MB/s of memory copy speed :D
Aida64 is not quite accurate there, Intel MLC is more precise on bandwidth, there I have 66500mb isj "Bandwidth" 38-41ns.
 
aida1.png
 
67200MB/s max memory throughput (that's based on math from 4200MHz effective, 128-bit bus and dividing by 8 to get bytes instead of bits).
AIDA64 scores : 70781MB/s read, 65559MB/s write and 71049MB/s of memory copy speed :D
1684539547944.png


1684540566326.png
 
16nm 1z dual rank 8 GB density DJR performs well on just XMP profile.. TRC is default to JEDEC profile (83). TRFC also default 350ns.

Wonder if TRFC will match 17nm 1y DJR. This is a newer Kingston bin replacing the older 17nm chips.


cachemem.png



Will OC later, but I'm surprised copy speed is this high via XMP.
 
Last edited:
Dropped my X3D back in so I could bring the rainbow back :D

Screenshot 2023-05-22 225953.png
 
4000hz dual rank b die
16-16-16-28
Trfc 320
Trefi 64k
Tightish 2nd and thirds
FA6F0C7C-3527-4547-BF3D-C83A4F9FC8A6.jpeg
 

Attachments

  • B7A855E7-01CD-4F1D-AF2A-7040124BDD1F.jpeg
    B7A855E7-01CD-4F1D-AF2A-7040124BDD1F.jpeg
    5.6 MB · Views: 222
What's with safe mode?

And why are guys only running the memory side?
 
mine is 24/7 settings
Yep, mine is 24/7 settings, new Profile Ram OC 102 FSB, kept for new GPU installed yesterday, pretty rock stable!
 

Attachments

  • R3700X_RTX4070 Phoenix.png
    R3700X_RTX4070 Phoenix.png
    1.2 MB · Views: 154
  • DLSS3 Performance+RT On.png
    DLSS3 Performance+RT On.png
    7.5 MB · Views: 149
Last edited:
Can't boot at 133 FSB or 400+ CPU. Unable to overcome this with voltage adjustments because there is no voltage control through jumpers or BIOS.
AIDA64 version 5.99 because the most recent version can't install, and I read that 5.99 is one of the last 98-compatible versions.
1685422682653.png
 
Don't use .exe installer for AIDA64 on Win98.
Just download .zip, unpack on main PC, copy files, and it should work.
 
Last edited:
Don't use .exe installer for AIDA64 on Win98.
Just download .zip, unpack on main PC, copy files, and it should work.
Thanks for the tip! I encountered issues installing a few other pieces of software that are supposedly 98-compatible, so maybe this trick will work for those too.
 
Hello from Spain.

I recently bought an HP workstation on ebay and I did the Benchmarking tests with Passmark Cpu Performance. The memory results were disastrous and barely reached 34% score in overall comparison with the rest of users.

In the CPU tests the results were good, but in the 2D, Memory and HD sections they were nowhere near what was expected,

One of the obvious problems I have seen, is that neither Passmark, nor CPU-Z are able to read the SPD information from the memory sticks (8 x 32GB ECC Registered DDR4 2666 + 4 x 8GB ECC Registered DDR4 2666= 288 GB in total).

Yesterday I bought the Aida64 license and now everything has changed radically and I think the results are abnormally exaggerated compared to other users.

I would like to get your help to know if I am doing something wrong.

Thank you very much in advance for your help.

Best regards, Javier G.

AIDA 64 BENCHMARK(1).jpg
AIDA64 CPU PHOTOWORXX(1).jpg
 
Here's mine. GPU is a Sapphire NITRO+ AMD Radeon™ RX 7900 XTX Vapor-X


Aida64 CacheMemory.jpg


Aida64 GPGPU.jpg


Aida64 CPUID.jpg
 
Intel i5 12600K - Gigabyte z690M AORUS ELITE AX DDR4 (Rev1.0) - 2x8GB SingleRank B-Die Patriot Viper 4400c19


16-16-16-32@4000 Gear1 CommandRate1T


1686796124701.png
 
Im sorry if this is the wrong place to ask, but what does Raptor lake SA voltage default too when running 5600 DDR5 spec? just curious
 
I'm messing around with some old stuff this week.

FX-8120 seemed to have descent IMC, able to run 4x4GB DDR3-2400CL9. But CPU-NB freq could not go past 2600MHz, so disappointment there. That horrendous AM3+ L3 latency was one of the biggest drawbacks.
 

Attachments

  • aida1.jpg
    aida1.jpg
    108.2 KB · Views: 163
Back
Top