- Joined
- Mar 7, 2007
- Messages
- 3,842 (0.61/day)
- Location
- Maryland
System Name | HAL |
---|---|
Processor | Core i9 13900k @5.8-6.1 |
Motherboard | Z790 Arous master |
Cooling | EKWB Quantum Velocity V2 & (2) 360 Corsair XR7 Rads push/pull |
Memory | 2x 32GB (64GB) Gskill trident 6000 CL30 @28 1T |
Video Card(s) | RTX 4090 Gigagbyte gaming OC @ +200/1300 |
Storage | (M2's) 2x Samsung 980 pro 2TB, 1xWD Black 2TB, 1x SK Hynix Platinum P41 2TB |
Display(s) | 65" LG OLED 120HZ |
Case | Lian Li dyanmic Evo11 with distro plate |
Power Supply | Thermaltake 1350 |
Software | Microsoft Windows 11 x64 |
I reinstalled my os with AHCI enabled everywhere in bios "1st".
When I boot up I keep getting an extremely fast message about the "mode not supported".
I think bios might cause that problem.. Using the system in my specs.. Got my mobo a year or so ago..
Also I have noticed recently that my ssd seems like maybe it's going into hibernate?
Idk. Seems like when it idles a little bit and I go to click on something, I get a pause. Then I hear a rather obvious clicking noise "The SSD starting back up?"
Sounds exactly like my external 1 tb HD that's not hooked up, when I plug it in and it starts up.
Maybe, I was thinking, it was my other 1 tb hd that stays connected, starting back up. But why would that cause a delay in the programs response? The programs is installed on the SSD, not the 1TB..
Maybe it's a power saving option.. idk.. Any idea what bios version I should be using?
Ideas on what might cause that?
Thank yas..
When I boot up I keep getting an extremely fast message about the "mode not supported".
I think bios might cause that problem.. Using the system in my specs.. Got my mobo a year or so ago..
Also I have noticed recently that my ssd seems like maybe it's going into hibernate?
Idk. Seems like when it idles a little bit and I go to click on something, I get a pause. Then I hear a rather obvious clicking noise "The SSD starting back up?"
Sounds exactly like my external 1 tb HD that's not hooked up, when I plug it in and it starts up.
Maybe, I was thinking, it was my other 1 tb hd that stays connected, starting back up. But why would that cause a delay in the programs response? The programs is installed on the SSD, not the 1TB..
Maybe it's a power saving option.. idk.. Any idea what bios version I should be using?
Ideas on what might cause that?
Thank yas..
Attachments
Last edited: