STAR CITIZEN - RSI POLARIS Project

[kmp.cooling]

 

[Vayra86]

Awesome, obligatory remark: will you finish it though?

 

[AsRock]

Awesome, obligatory remark: will you finish it though?

Not until the original game is ?, you know how they change some thing and it breaks mods.

 

[kmp.cooling]

The ASUS STRIX OC 4090 I bought for this mod has finally arrived! I’m excited to share some photos with you while I get ready to start working on it! Here are the shots! Customization work will begin soon!

 

[Athlonite]

You might want to have a word with your delivery driver about dropping stuff that box looks like it went 3 round with Mike Tyson

 

[kmp.cooling]

You might want to have a word with your delivery driver about dropping stuff that box looks like it went 3 round with Mike Tyson

Good thing it’s toughly packed! Wouldn't want it to lose the fight!

 

[kmp.cooling]

Hi everyone!
I’m thrilled to introduce the latest addition to my Star Citizen-themed modding project: the powerful ASUS RTX 4090 STRIX OC!

In this stage of the project, I began by disassembling the stock cooler to apply liquid metal, ensuring even better heat dissipation and allowing the card to maintain optimal temperatures under load.

After preparing the card with liquid metal, I installed a BYKSKI water block, integrating it into the PC’s custom loop for silent and highly efficient cooling. This setup lets me push the card to its limits while maintaining the sleek, customized look of the project.

Stay tuned for the next steps, and feel free to share any feedback or suggestions to further enhance the build. Thanks for your support!

 

[kmp.cooling]

I’m excited to share another major step forward in my Star Citizen-themed mod. Today, I’m introducing the new SSDs that will become an integral part of the project: two T-Force Vulcan Z 1TB, which will be fully customized, and the high-performance Samsung 990 Pro 2TB, which will remain in its original configuration to ensure maximum performance.

---

T-Force Vulcan Z 1TB​

• Interface: SATA III, 2.5" form factor.
• Transfer Speeds:
  • Sequential Read: Up to 550 MB/s.
  • Sequential Write: Up to 500 MB/s.
• Capacity: 1 TB per unit.

These two SSDs will undergo a complete aesthetic transformation to fit perfectly into the mod's theme. The minimalistic design of the Vulcan Z provides the perfect foundation for a custom look that echoes the futuristic and technological atmosphere of Star Citizen. The customization will focus on details that combine art and technology while preserving their excellent performance.

---

Samsung 990 Pro 2TB​

• Interface: PCIe 4.0 NVMe, M.2 form factor.
• Transfer Speeds:
  • Sequential Read: Up to 7,450 MB/s.
  • Sequential Write: Up to 6,900 MB/s.
• Capacity: 2 TB.

This SSD represents cutting-edge speed and capacity, making it ideal for high-performance applications. It will remain in its original configuration to ensure flawless functionality and support the mod’s most demanding tasks.

---

The customization of the T-Force Vulcan Z SSDs will go beyond aesthetics, aiming for a seamless integration into the system to ensure that the design and performance work in harmony, providing a superior user experience.
Stay tuned for further updates on the customization process and the evolution of the project. Every component is carefully chosen to elevate the overall quality of the mod, both technically and aesthetically.
I welcome any feedback or suggestions from the community. Your input is invaluable for the ongoing improvement of this project.
#StarCitizenMod #PCModding #CustomSSD #HighPerformanceStorage #TechArtistry

 

[Space Lynx]

liquid metal on your custom loop 4090, not going to lie, that is pretty damn amazing.

I know liquid metal never needs changed, but hopefully the card will still be relevant when Star Citizen releases (sorry, I had to)

 

[dgianstefani]

You should cover the exposed surface mount components on GPU with nail varnish or some other insulating material, I also have LM on GPU.

 

[kmp.cooling]

liquid metal on your custom loop 4090, not going to lie, that is pretty damn amazing.

I know liquid metal never needs changed, but hopefully the card will still be relevant when Star Citizen releases (sorry, I had to)

Haha, thank you! The liquid metal was definitely a bold move—gotta keep those temps in check while navigating the ‘verse, right?

And hey, I see what you did there with the Star Citizen release timeline! Touché. Let's just hope both the card and the game make it to the finish line together. Until then, this 4090 is ready for anything, even if it ends up running "Star Citizen 2: The Remake"!

You should cover the exposed surface mount components on GPU with nail varnish or some other insulating material, I also have LM on GPU.

You're absolutely right, and thanks for pointing that out! I’ve been using liquid metal for years, so I’ve developed a routine to ensure everything is done safely. Before applying it, I did coat the exposed surface mount components with a conformal coating to insulate them properly. However, I don’t leave those protective layers on after applying the LM—I prefer to keep things clean and precise.

That said, it’s always good to share tips like this because liquid metal can be risky if not handled correctly. Do you have any specific methods or tricks from your own experience? It’s always great to exchange ideas and learn something new from others in the community!

 

[kmp.cooling]

Hi everyone,
I’m excited to share an important update about my Star Citizen-themed modding project. I’ve decided to take things to the next level and try something new: airbrushing!
Until now, I’ve always used spray paint cans, but this time I want to push myself further and experiment with more precise and detailed techniques.

With the arrival of a Sagud compressor and a set of precision airbrushes, I can finally start working on gradients and details that were hard to achieve before. This is a completely new world for me, so any advice or tips from those of you who have experience with airbrushing would be invaluable!

Here are some photos of the new setup:

The idea is to create textures and effects that evoke the futuristic universe of Star Citizen, while keeping the style elegant and consistent.
Have you ever used an airbrush for your projects?
Any tips or mistakes to avoid?

I’m open to any suggestions and can’t wait to connect with others who share this passion. Stay tuned: I’ll soon share my first experiments and updates on the project!

 

[kmp.cooling]

Hello Citizens!
While I’m deep into the aesthetic details of my Star Citizen mod, I’m pushing the limits of my plotter’s capabilities. Spoiler: I’m trying to create insanely tiny details… it’s a real challenge, but that’s the fun part, right?

Meanwhile, Star Citizen dropped a new video that I couldn’t pass up. It’s all about the RSI Polaris, one of the most iconic and awaited capital ships, unveiled at the recent CitizenCon and now part of the latest patch!

For those unfamiliar, the Polaris is a multi-role ship that blends power, elegance, and versatility. It’s ideal for escort missions, tactical raids, and with its hangar, light fighter support. Truly a beast of the stars! ️

To see it in all its glory, check out this official video:

Now my question to you:
If you were the commander of a Polaris, how would you use it?
Would it be your flagship for galactic exploration or a strategic weapon for epic battles and raids?

Let me know your thoughts in the comments below—I’m curious to hear your take!

 

[kmp.cooling]

New materials for my Star Citizen mod!

Hey everyone! Today, I got some new materials to continue working on the mod, and I wanted to share the latest arrivals with you:

• Metallic vinyl wrap: I picked four colors – black, blue, silver, and pearl white. I’ll use these to cover some parts of the case and give it a unique touch. The metallic blue and silver are perfect for capturing Star Citizen’s futuristic vibe.
• A new cable tool: Finally! With this tool, I can work on the PSU cables with precision – cutting, stripping, and organizing them. I want the cable management to be spotless and tidy, no messy wires.
• LEDs for the liquid cooling loop: These are awesome. I’ll install them on the tubes to create stunning lighting effects, something that mirrors the spaceship lights in the game.

All of this was bought with my own money (no sponsors yet, but I’m working on it). I’m really excited to see how these details will fit into the final build.

Let me know what you think or if you have any suggestions!

 

[kmp.cooling]

New Materials for My Star Citizen Mod!​

Hey everyone!

I know I’ve been absent for a while, but I’ve been busy with home renovations—extra expenses and various projects taking up my time. In the meantime, some materials I ordered for the mod have finally arrived, and I wanted to share the latest updates with you!

Secondary Monitor for Sensor Panel​

I’ve purchased an ultrawide secondary display, which will be used as a sensor panel inside the case. The goal is to create an HUD-style interface inspired by Star Citizen, displaying real-time system data such as temperatures, GPU/CPU usage, fan speeds, and other metrics. This will be integrated using AIDA64 and Rainmeter, designed to match the game’s futuristic aesthetics.

Bitspower Hard Tube Bending Kit​

To build the custom liquid cooling loop, I’ve invested in a Bitspower tube bending kit. This will allow me to achieve precise and clean bends without relying on less accurate tools. The kit includes:

• Various angle templates (45°, 90°, 180°) for precise bends
• Tube cutter and finishing tools
• Guides to keep the tube stable during bending

Looking forward to getting back to work on the mod soon. Stay tuned!

 

[kmp.cooling]

Hey everyone!
Here are the three Bykski 360mm radiators that will enhance the liquid cooling system for this mod.

Unboxing & First Impressions
The build quality is excellent, with a solid structure and well-optimized fin density for efficient heat dissipation. One of the standout features is the transparent section on the side, giving the radiators a futuristic and high-tech look. This detail perfectly matches the Star Citizen aesthetic, adding a sleek, spaceship-inspired vibe to the setup.

Customization Incoming!
These radiators won’t stay stock—I’ll be customizing them with a Star Citizen-themed design to fully integrate them into the build. I already have some ideas for finishes and aesthetic details, so expect some updates soon!

For now, here are some unboxing photos.

 

[kmp.cooling]

New Arrivals: Pump, Flow Meter, ROG Controller & Loop Tester​

Hey everyone!
New batch of components just landed for the Star Citizen-themed build, and I had to share the latest additions with you!

---

Granzon DDC Pump + Touch Display​

The Granzon DDC pump with integrated touch display is here—a sleek and powerful unit that blends functionality and aesthetics.

• Real-time readout of RPM, flow rate, temp
• Cockpit-style interface, a perfect match for the Star Citizen theme
• Compact and clean design, ready for custom visuals

---

Bykski Flow Meter B-TFC-CS-X​

A must-have addition for the loop: the digital flow meter by Bykski.

• Shows temperature, flow (L/min), and rotational speed (r/sec)
• Minimalist and modern look, with a built-in display
• Will integrate seamlessly next to the secondary monitor HUD

---

ASUS ROG Fan & ARGB Hub​

This hub will handle fan and RGB strip management across the build.

• Aura Sync compatible
• Plenty of ports for clean and centralized cable routing

---

Electronic Pressure Tester​

Also added an electronic pressure tester for the loop.

• Essential for leak testing before powering on the system
• Helps ensure maximum safety and peace of mind during the first fill

---

Sharing some pics of the new gear!
As always, each piece will be integrated with care and style to reflect the Star Citizen universe, both visually and functionally. Some will even be customized with unique graphics—more updates coming soon!

 

[kmp.cooling]

Granzon Fittings Have Arrived​

Hey everyone!
Time for another update: I’ve purchased the Granzon fittings for the custom loop, and the first batch has arrived!

All the fittings you see in the group photo are the same model: these are 14mm hard tube compression fittings, with standard G1/4 threading.
I chose them for their sharp, clean design, which fits perfectly with the technical and futuristic look I’m aiming for in this Star Citizen-themed build.

I’ve included a few close-up shots to show the details: glossy black finish, engraved logo, and a very solid construction.
First impressions are great—precise threading, a secure grip on the locking ring, and a generally high-quality feel overall.

Other types of fittings have also arrived, but I’ll be showcasing them in future updates, along with some photos of how they’ll be used in the system.
Soon, I’ll start working on the tube bending and fitting layout, where these will really begin to shine.

One step at a time, we’re building the heart of this spaceship.

 

[kmp.cooling]

Hey everyone!
As promised, here’s another batch of Bykski accessories that will enrich the custom liquid cooling loop of my Star Citizen build.

These are G1/4 extenders of various sizes, including adjustable telescopic models, perfect for bridging precise gaps between components—especially useful in more complex layouts.

The black extenders have a clean, technical look, while the chrome shut-off valve adds a nice touch of contrast.
I’ve also received a set of end plugs with the Bykski logo, always handy and visually consistent.

️ On the customization front, I’ve started airbrush painting tests, experimenting with finishes and textures inspired by the Star Citizen universe.
I’m also working in CAD to create custom stencils and graphic details that will be applied to visible components later on.

Here are a few pics—and more accessories are still to be shown in the next updates, along with some previews of the visual customization work.

All items shown were personally purchased, allowing me to maintain full creative and technical control over the build.

 

[kmp.cooling]

More updates incoming for my build – today I'm showcasing a fresh batch of special fittings that will further enhance the project.

Granzon G1/4" Multi-Directional Rotary Elbows
These articulated fittings offer maximum flexibility for tube routing – ideal for creative loops and tight spaces.

• Model GD-X (Matte Black):
  Compact and aggressive design, they remind me of mechanical joints straight out of a spaceship.
• Model GD-SK (Polished Silver):
  Same function, but chosen in silver for a deliberate contrast, as if representing different modules or compartments of the hull.

All the visual choices are inspired by the aesthetics of the Star Citizen universe.
️ Meanwhile, airbrush tests are progressing better than expected, and I’m currently working in CAD to design custom stencils and patterns to give each part a unique Star Citizen look.

Check out some photos below! More components have arrived, and I’ll be sharing them with you soon in detail… stay tuned!

 

[Ferather]

Interesting project, will follow this thread. RSI Constellation Andromeda myself.

 

[Dicfylac]

I'm curious to see how will be your implementation of Grazon case.

Btw, keep up the good work.