the extreme oc clubhouse.

[regan1985]

had some time to play again, best i can do for now will have a go at getting 3380, which it did boot 1 day but this will do for now as it puts me in the lead come on tatty show me what u got

 

[Tatty_Two]

Shit voltage at 1.7......I could get 4Gig outta that!!!! Am not resetting the machine until between Christmas and New Year but will have a go early next week, apart from that you deserve at least a little time on the top....enjoy whilst you can

 

[regan1985]

hehe good luck this will be a close call, i seem to have a nice little chip here running cool and high! going to use the ram out of my friends system to get more i rekon i can hit 3.4 lets see what u can get 1st how much r u going to put in2 your cpu thats the question!

 

[xman2007]

can i get in with the highest software oc on a x2 3800+ got it at 2.53, lowered mem in systool to 266ddr and then bumped up voltage to 1.4 and fsb to 250 cpuz and systool screenie below, cant go anyfurther with software/oc as htt hits 1000 and no options in bios for lowering or oc'ing

 

[overclocker]

I got my 2X 4400+ to 2600mhz em i in ? LMAO

 

[xman2007]

sarcasm wot is it agin lowest form of humour ?

 

[Tatty_Two]

hehe good luck this will be a close call, i seem to have a nice little chip here running cool and high! going to use the ram out of my friends system to get more i rekon i can hit 3.4 lets see what u can get 1st how much r u going to put in2 your cpu thats the question!

But thats cheating! you are sposed to do this on your kit, not borrow other peoples, thats like me using the next door neighbours C2D extreme on 4.4Gig with memory running at 1275Mhz to win the SM2 competition!

 

[cdawall]

But thats cheating! you are sposed to do this on your kit, not borrow other peoples, thats like me using the next door neighbours C2D extreme on 4.4Gig with memory running at 1275Mhz to win the SM2 competition!

your neighbor has a C2D extreme at 4.4ghz

 

[regan1985]

well its my old ram as i am upgrading to a duo very soon so i started selling party of my computer so yeh it does count! anyway u still havent got near my score yet so i dont need to change my ram yet

 

[Tatty_Two]

your neighbor has a C2D extreme at 4.4ghz

Sorry got that slightly wrong.....4.2 Gig

 

[Tatty_Two]

well its my old ram as i am upgrading to a duo very soon so i started selling party of my computer so yeh it does count! anyway u still havent got near my score yet so i dont need to change my ram yet

Thats cause I have not tried!, as I said, will do it sometime during the holidays, expecting a few games for Christmas so dont wanna keep re-jigging the rig.

 

[Ketxxx]

had some time to play again, best i can do for now will have a go at getting 3380, which it did boot 1 day but this will do for now as it puts me in the lead come on tatty show me what u got

that chip will fry regardless of how cool it is. it wasnt designed to take that sort of vcore, and in fact that voltage is above and beyond its threshold. the chips can handle 1.65v MAX, and thats pushing it. let alone 1.7v.

 

[regan1985]

keeping it for about a month till i get a 165 that why i dont mind pushing it

 

[regan1985]

ohh yeh tatty dont push it 2 far make sure u have plated ur games u got for crimbo im gonna be playing my ceasar on stock lol jst incase

 

[Tatty_Two]

ohh yeh tatty dont push it 2 far make sure u have plated ur games u got for crimbo im gonna be playing my ceasar on stock lol jst incase

Got Battlefield 2142
Medieval 2 Total War
GRAW


Normally run day to day at 3.1Gig on 1.375-1.4 depending on how fineky she feels!

 

[regan1985]

i got Medieval 2 Total War aswell and ceasar 4 both great games would recomend, my rig is running at 3ghz just to give it a rest at 1.56v nice n cool aswell

shame i have to send my graphics card off to get modded soon

 

[curt]

hey

amd 64 s939 3800+ venice 512kb cash 1.656v fsb250.95 x12 3011 will post pic

amd 3800+ temp was 25c at 3gh


buddys p4 2.8 1mb cash [prescot i think] made it up to 1.6c 180sumthin fsb 3907mh stable will get pic if i can

temp was about 45c stock cooler being feed chilled air

damit ill get thows pics

ok i got a soket a rekered maby

the one in the pic is a xp3000+ barton socket A runnen a voltige of 2.10 and crashed at 45c putting out 138w of heat acording to cpubid cooled by a chilled water/antyfreez system

 

[Tatty_Two]

amd 64 s939 3800+ venice 512kb cash 1.656v fsb250.95 x12 3011 will post pic

amd 3800+ temp was 25c at 3gh


buddys p4 2.8 1mb cash [prescot i think] made it up to 1.6c 180sumthin fsb 3907mh stable will get pic if i can

temp was about 45c stock cooler being feed chilled air

damit ill get thows pics

ok i got a soket a rekered maby

the one in the pic is a xp3000+ barton socket A runnen a voltige of 2.10 and crashed at 45c putting out 138w of heat acording to cpubid cooled by a chilled water/antyfreez system

Nice but those voltages are too high for a Venice, should NEVER go above 1.6V and preferably no higher than 1.55V for prolonged periods, it's not just temps, it's also about stress on the CPU. The San Diego core is a little more hardy although I get 3.2Gig on 1.525V.

 

[curt]

hey

that depends on who u ask if my old xp3000 can take from 1.6v to 2.1 im shure this p.o.s 3800+ can take 1.8 maby more if only fryed 1 cpu by ocing so far it was a [celiron 1000 1.7v stock] fryed it trying to do 1500 with a voltige of 3.2v lol booted at 2.3v runnen 1400 that was before i tryed 3.2v of corse

plus i buy parts knowing im o.c the livin shit outa it so evin if i do lose a cpu no big deal i work at a comp store so not like its hard for me to get a nuther

and as for stress my ols xp3000 still runes just fine an i had it a 2.6gh at 2.10v for more then a year

 

[dominick32]

E6700 @ 4.80 GHz
81% Overclock

 

[Tatty_Two]

that depends on who u ask if my old xp3000 can take from 1.6v to 2.1 im shure this p.o.s 3800+ can take 1.8 maby more if only fryed 1 cpu by ocing so far it was a [celiron 1000 1.7v stock] fryed it trying to do 1500 with a voltige of 3.2v lol booted at 2.3v runnen 1400 that was before i tryed 3.2v of corse

plus i buy parts knowing im o.c the livin shit outa it so evin if i do lose a cpu no big deal i work at a comp store so not like its hard for me to get a nuther

and as for stress my ols xp3000 still runes just fine an i had it a 2.6gh at 2.10v for more then a year

Well firstly dont compare an Athlon XP with the Venice core....different processes meaning the XP was fed at stock a lot more than the 1.4-1.45V Venice stock, and it does not really depend on who you ask, just rely on AMD's word for it, in their forums they strongly recommend against ever going higher than .15 above stock voltage, but hey it's your chip so you can do what you want.

 

[curt]

hey

yeah its alot more wink wink nuge nuge lol my xp3000.s stock voltige is 1.600 or 1.650 cant remember but its off by 0.2 i dont consider that alot

considering it took 3.2v to fry a 1.7 volt celiron

 

[Deleted member 24505]

added-

curt in skt a
dominick32 in skt 775

sig post no.19(i think)

 

[curt]

hey

thank u for putting up my cpu mark but arnt bartons 130nm

 

[ace80]

My mate just swapped me his p4 631 for my p4 630, coz it wouldnt run in his machine, and i'm now a very happy man!

voltage in bios set at 1.385v - (1.45v idle/1.39v load)

Do i qualify?