• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

The Ultimate Realtek HD Audio Driver Mod for Windows 10

@Virion you must run bat file or first install product settings then install appx
But Remember that dts headphone x, nahimic, dolby atmos are enhancers for stereo channel configuration i thing that nahimic can work in multichannel configuration but affects only front speakers
 
Last edited:
Dj Urko said:
@Virion you must run bat file or first install product settings then install appx
But Remember that dts headphone x, nahimic, dolby atmos are enhancers for stereo channel configuration i thing that nahimic can work in multichannel configuration but affects only front speakers
Click to expand...
For Dolby atmos I think you have to first enable 5.1 processing by editing system32\dolbyaposvc\default.xml first. It is configured for 2 channels on stock settings.
 
@CityCultivator yes you can modified the xml but is remember that this is not surround sound upmixer like dolby home theatre v4

@OMER sure its better you can also see the functionality what like extra dolby home theater v4 have and what another plugins does not have but new ui and design
 
Last edited:
Dj Urko said:
@Virion you must run bat file or first install product settings then install appx
But Remember that dts headphone x, nahimic, dolby atmos are enhancers for stereo channel configuration i thing that nahimic can work in multichannel configuration but affects only front speakers
Click to expand...
basically for headphone user Gameing and Movies.
 
Dj Urko said:
@CityCultivator yes you can modified the xml but is remember that this is not surround sound upmixer like dolby home theatre v4

@OMER sure its better you can also see the functionality what like extra dolby home theater v4 have and what another plugins does not have but new ui and design
Click to expand...
OMER said:
So that means older dolby home theatre v4 is better than all latest dolby uwp drivers
Click to expand...


Does Dolby Digital Home Theater v4 do surround-up mixing?
 
Dj Urko said:
@CityCultivator yes you can modified the xml but is remember that this is not surround sound upmixer like dolby home theatre v4

@OMER sure its better you can also see the functionality what like extra dolby home theater v4 have and what another plugins does not have but new ui and design
Click to expand...

Can you combine dolby atmos gaming uwp+dolby pcee4 in to one just like dldolby.blogspot's.com, Nghĩa Đinh, he combined dolby atmos gaming uwp+dolby pcee3, here is the link take a look

https://dldolby.blogspot.com/2019/02/realtek-high-definition-audio.html
 
@OMER in my mod all these plugins work together over speakers analog only dolby home thater v4 and dolby digital plus work on spdif
You must set all plugins to music and only one to movie and you can also disable someone who dont need to use
 
Last edited:
Multiple audio enhancers combined, how all it work actually simultaneously, i tried it, it distortes audio, crackling audio, it conflicts with each other
 
Dj Urko said:
@OMER in my mod all these plugins work together over speakers analog only dolby home thater v4 and dolby digital plus work on spdif
You must set all plugins to music and only one to movie and you can also disable someone who dont need to use
Click to expand...

UWP Sonic Studio 3 & Alienware Sound Centre, this are specific hardware supported, can you unlock this two audio enhancers to work on my gigabyte motherboard
 
Can someone make Sound Blaster series ( X720, Cinema 1,2,3, X-Fi MB 2,3,5 ) + Dolby Atmos gaming UWP + Realtek UWP .inf file ?


It will be a legend file of this forum. !! pls !

Basic Sound Blaster Sound Effects + Dolby Post-Processing + The latest Realtek UWP platform.
It will be absolutely fabulous !
 
Last edited:
@Dj Urko It is surround sound upmixer; properly configured it upmixes audio to all channels, including side/rear channels. I use it for upscaling stereo-5.1 on my audio system.
check those settings:
For 5.1
Code: 
<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="6" front_count="3" side_count="2" height_count="0" has_subwoofer="1">
Also check this:
Code: 
<surround-decoder-enable value="1"/>
All previous settings such as headphone surround virtualiser, dialog enhancer, volume leveler, graphic equaliser is present in xml.
Only missing is three additional Intelligent Equaliser presets.
I stopped using PCEE4 for audio processing because is has a defect that I cannot personally accept: It cannot handle float audio data properly; audio samples louder than 0dBFS clips with PCEE4. This bug was removed in all later versions of Dolby software.
@ReconNyko All Dolby software does upmixing. PCEE3 and earlier uses Dolby ProLogic. PCEE4 and later versions use Dolby Next Gen surround Decoder. This decoder is the basis for current atmos upmixing on receivers.
 
Last edited:
CityCultivator said:
@Dj Urko It is surround sound upmixer; properly configured it upmixes audio to all channels, including side/rear channels. I use it for upscaling stereo-5.1 on my audio system.
check those settings:
For 5.1
Code: 
<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="6" front_count="3" side_count="2" height_count="0" has_subwoofer="1">
Also check this:
Code: 
<surround-decoder-enable value="1"/>
All previous settings such as headphone surround virtualiser, dialog enhancer, volume leveler, graphic equaliser is present in xml.
Only missing is three additional Intelligent Equaliser presets.
I stopped using PCEE4 for audio processing because is has a defect that I cannot personally accept: It cannot handle float audio data properly; audio samples louder than 0dBFS clips with PCEE4. This bug was removed in all later versions od Dolby software.
Click to expand...


Shouldn't 5.1 speakers be 3 fronts because a left, Center, Right. 2 sides/rear: left rear and right rear. 1 sub

Instead of what @alanfox2000 said on pg 30 on making a enhancers thread, which is 5.1 speakers: total_count="5" front_count="2" side_count="2" height_count="0" has_subwoofer="1"

?
 
Jayce said:
Shouldn't 5.1 speakers be 3 fronts because a left, Center, Right. 2 sides/rear: left rear and right rear. 1 sub

Instead of what @alanfox2000 said on pg 30 on making a enhancers thread, which is 5.1 speakers: total_count="5" front_count="2" side_count="2" height_count="0" has_subwoofer="1"

?
Click to expand...
Center speaker is in front, thus it is considered as a special front speaker.
Alanfox2000 also approve.
 
Last edited:
Jayce said:
So 6 chn count instead of 5 chn count in the XML preset?
Click to expand...
You see the math. Total count=6.
Dolby considers the 5.1 to be a 6 channel system, just one channel limited to low frequency.
 
CityCultivator said:
You see the math. Total count=6.
Dolby considers the 5.1 to be a 6 channel system, just one channel limited to low frequency.
Click to expand...
i see. i don't know why @alanfox2000 said at #692 post on making-audio-enhancers-work-on-windows pg 29

For 5.1 or 7.1 speakers - Dolby DAX API Service 3.xxxxx.yyy.z
change from total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0" to
5.1 speakers: total_count="5" front_count="2" side_count="2" height_count="0" has_subwoofer="1"
7.1 speakers: total_count="7" front_count="2" side_count="2" height_count="2" has_subwoofer="1"

when i all i heard and read that 5.1 is 6 channel system.
 
Jayce said:
i see. i don't know why @alanfox2000 said at #692 post on making-audio-enhancers-work-on-windows pg 29

For 5.1 or 7.1 speakers - Dolby DAX API Service 3.xxxxx.yyy.z
change from total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0" to
5.1 speakers: total_count="5" front_count="2" side_count="2" height_count="0" has_subwoofer="1"
7.1 speakers: total_count="7" front_count="2" side_count="2" height_count="2" has_subwoofer="1"

when i all i heard and read that 5.1 is 6 channel system.
Click to expand...
This is old debate. We had a discusssion afterward, and though if I recall properly alanfox did not confirm my response explictly, the configuration for Dolby Atmos by him/her was changed.
 
Jayce said:
Okay, as long as he changed then it is confirmed for dolby uwp apps. I knew 5.1 was 6 channels. But didn't know that the configuration changed on Alanfox's page.

I wonder if using a channel less made a difference in sound.
Click to expand...
Not sure. Have to listen to see.
Windows do have a way to tell APOs upstream that the next filter down has a specific speaker configuration. Dolby Digital Plus, PCEE4 uses that; SRS Premium Sound uses that. This is why DDL works. The DDL APO sets a new speaker configuration for APOs upstream to use.
Why this xml setting is beyond me.
 
CityCultivator said:
Not sure. Have to listen to see.
Windows do have a way to tell APOs upstream that the next filter down has a specific speaker configuration. Dolby Digital Plus, PCEE4 uses that; SRS Premium Sound uses that. This is why DDL works. The DDL APO sets a new speaker configuration for APOs upstream to use.
Why this xml setting is beyond me.
Click to expand...
Thing that bothers me is that the configuration is set when downloading the original presets on puresoftapps. Like for 2.1
It supposed to be this 2.1 speakers: total_count="4" front_count="3" side_count="0" height_count="0" has_subwoofer="1"


But in preset 2.1 is total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0">
 
Jayce said:
Thing that bothers me is that the configuration is set when downloading the original presets on puresoftapps. Like for 2.1
It supposed to be this 2.1 speakers: total_count="4" front_count="3" side_count="0" height_count="0" has_subwoofer="1"


But in preset 2.1 is total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0">
Click to expand...
Most 2.1 plugs with a single 3.5mm wire. They are essentially 2.0 system with a central sub. For these systems, 2.0 stock settings must be used.
 
CityCultivator said:
Most 2.1 plugs with a single 3.5mm wire. They are essentially 2.0 system with a central sub. For these systems, 2.0 stock settings must be used.
Click to expand...
I was wondering, not that the 2.1 configuration matters to me, since I have 5.1 surround sound with Logitech z506.
 
Jayce said:
I was wondering, not that the 2.1 configuration matters to me, since I have 5.1 surround sound with Logitech z506.
Click to expand...
Probably the settings are still not updated.
 
You must log in or register to reply here.
Back
Top