• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

TPU's Core i7 Overclocking and Feedback

nicely done asylum, nicely done :rockout:
 
first try, im a little worried my ram v is a bit high. 1.76 first run.JPG
 
if you would have answered the phone when i called you that wouldn't have happened
 
oh, okay. you get a
0808_Free_pass.jpg
[
 
whats is a good timing at that speed? 9-9-9-15?
 
2nd run. 2nd run.JPG
 
Is the 223 bclk wall with Ht, on the ud5 ?
 
222 is pretty hard to get past unless you know how and what the mobo/cpu/mem wants.

some of us are skilled enough to figure it out and others figure it out by mistake.

the rest are probably stuck behind the "WALL" and unfortunately there's not alot that can be done to circumvent the "WALL"
 
well Im not skilled to hit past 3.6 without it bsod on me. i suck at i7 overclocking.
 
i'd say so... you can get 4.2ghz on auto settings so if you cant get anything past 3.6ghz stable you're def. doing it wrong.
 
yeah :( tell me about it.

I do not understand all the voltages vtt and gpi

I see most people with d0's are doing 4.2 on about 1.3 v and for my 3.6 im doing 1.39gpi and 1.4v
 
freaksavior said:
yeah :( tell me about it.

I do not understand all the voltages vtt and gpi

I see most people with d0's are doing 4.2 on about 1.3 v and for my 3.6 im doing 1.39gpi and 1.4v
Click to expand...

Don't say most. I've had eleven DO chips. The last 4 or five I've had from newer batches needed 1.35-1.37v to hit 4.0ghz. However, you are most certainly doing something wrong if you can't get past 3.6 on 1.4v.
 
you are needing high vcore to counter the off settings of the other voltages/settings
 
either one of you wanna come over and oc my ud5? ;)

I think binge has given up helping me since he has tried so many times :laugh:
 
ud5 is so damn easy to OC.

you basically turn the knob
 
:twitch: it has a knob?
 
When I touched its knob I felt a powerful but feminine excitement.
 
freaksavior said:
either one of you wanna come over and oc my ud5? ;)

I think binge has given up helping me since he has tried so many times :laugh:
Click to expand...

First thing would be to set your memory controller to 2:8 and timings to 9-9-9-24-74 to start with.(you can tighten these later.)
Then set your uncore to x17= 3400 and something i believe.
Dont have a gigabyte board but ill post what i can think of.
Start out with these and tweek lower or higher as you go.
vcore 1.4
vtt 1.3
pll 1.2
qpi 1.3
Just off the top of my head...Im at work right now.
 
changing pll doesn't do anything for such a low OC.
 
pll is not something that needs changing until 4.8ghz/230bclk and beyond
 
just leave Pl on auto as well.

Freak u got pm
 
You must log in or register to reply here.
Back
Top