TPU's Rosetta Milestones and Daily Pie Thread

[Arjai]

I am having issues with the box running Rosetta. Sometime next week I will get it sorted and be back. No time for it and work, I'm toward the end of a 12 day run at work. It eases up next week.

 

[Toothless]

I didn't notice til yesterday I got jobs again. oop

 

[phill]

Well here we are again for the Rosetta Pie Stats update for the 12th December 2021....

And now for the milestones and stoners for the day......

@ TPU!!!!!
@weekendgeek !!

Well what a day today, a great milestone for @weekendgeek and then an even bigger one for TPU!! Hats off you to all, brilliant and impressive work everyone!! What a milestone!! 25,000,000 points already, wow!!
Well best I move on before I do anything stupid Take care everyone, hope to see you again tomorrow....

 

[mstenholm]

Hi and Welcome Zeke. I don't know if you know how to navigate in Rosettas homepage but just in case you don't this is your last three results. What it shows is that you have some serious CPU intensive background tasks running. The last job lasted for 18910 seconds but it only used 4618 seconds actually working on the job, that is 75% of the time lost to whatever other tasks you have running. It could be something useful and then forget that I mentioned it.

 

[phill]

Here we go for the Rosetta Pie Stats for the 13th December 2021!!....

And now for the milestones and stoners for the day.....

Sadly no one today, but hopefully tomorrow I hope everyone is doing well and is alright?? Amazing work everyone, your contributions are legandary!!

 

[phill]

And here we go for the 14th December 2021 for Rosetta Pie Stats....

And now for the milestones and stoners for the day....

@weekendgeek !!
@Zeke ??!!

Great work again everyone and well done for the great contributions guys!! I hope everyone is doing well and is ok??
Also massive welcome to @Zeke who has put some points on the table as well, amazing stuff!! Hope to see you back again very soon!!

 

[phill]

Here we go guys and gals... Rosetta Pie Stats for the 15th December 2021!!......

And now for the milestones and stoners for the day.....

@weekendgeek !!
@Zeke ??!!

Great work everyone, 6 members today contributing to the team, I think that's the highest yet?! More great contributions to the team as well, outstanding day everyone!! Great work everyone, hopefully get to catch up again tomorrow for the next update Until then!! .....

 

[phill]

And here we are back in the Rosetta Pie Stats for the 16th December 2021, how did we get on??....

And now for the milestones and stoners for the day.......

@weekendgeek !!

Great work from our lone stoner today, nice one @weekendgeek !! Some very nice contributions to the team as well, amazing efforts guys, brilliant work!! I hope everyone is doing well and ok... Hope to catch up with you all again soon!!

 

[phill]

Here we are with an update for the Rosetta Pie Stats for the 17th December 2021......

And now for the milestones and stoners for the day.....

@weekendgeek !!

Great work from our stoner today for hitting their next milestone!! Congrats!!
Hope everyone is doing well and is ok today? Hope to catch you all again for the next update, hope to see you all again soon!!

 

[phill]

And here we are with another update for the 18th December 2021 for Rosetta Pie Stats....

And here we are again for the next update with the Milestones and Stoners for the day....

@mstenholm !!
@Toothless !!
@weekendgeek !!

Well what a day!! More contributions and a load of stoners and milestones as well!! Outstanding!! Great work to our three stoners as well today, great work indeed!! Another brilliant day as always, so many points its unreal! So well done and thank you for the amazing support. Hope to see you all again tomorrow for the next update!! Take care and hope your all, alright

 

[phill]

Well here we are with a some what broken Rosetta Pie Stats update for the 19th December 2021.....

And now for today's milestones and stoners for the day.....

Sadly no one today but here's hoping.....

Not sure what is going on with Free-DC as grabbing the data earlier on crashed Excel because the site was down and then dopey me with part of the data already grabbed, lost all that so had to do it again lol Well that'll teach me!!

Still more so, I hope everyone is doing alright and is ok?? Looking forward to the next update..... Hope to see you there

 

[phill]

Well here we are again for a Rosetta Pie Stats update for the 20th December 2021....

With Free-DC currently not accessible, I sadly don't have much more to post up... I don't think any milestones have been surpassed but I will need to have a look into the way its reported on the Boinc stats, I hope to find out where the milestone data is so I can report back for us all

I hope that everyone is doing well and is alright?? Some great contributions going on today!! @mstenholm and @weekendgeek couldn't have got much closer if they had tried!! Amazing efforts there guys!! @Toothless being 3rd with a very impressive contribution for the day!! Well done guys, that's amazing!!

Hope to catch up with you all tomorrow for another update!!

 

[Deleted member 202104]

Just a heads-up - My Rosetta jobs dried up at about 1:00am today my local time (GMT -8:00) and haven't been back since. Found the dedicated machine down to 4 threads out of 32 this morning.

 

[mstenholm]

Just a heads-up - My Rosetta jobs dried up at about 1:00am today my local time (GMT -8:00) and haven't been back since. Found the dedicated machine down to 4 threads out of 32 this morning.

Yes I found out 18 hours ago. It has happened to often lately. My 2700Xs still have half a day worth of work left each. My 3900X defaulted to WCG so I’m 9K down now.

 

[phill]

Well here we are again for another Rosetta Pie Stats update for the 21st December 2021.....

Well done everyone, I am impressed to see such great scores... Cause it would help if I had known if the damn PC had loaded into the OS rather than stuck at a setup screen.... Still, never mind Hopefully today will help a little more with it actually loading in!!

Great scores guys, great support as always Hopefully we won't have too many issues with the lack of work units coming through again but I noticed my 2700 rig was empty this evening... Here's hoping we'll get a few more by the morning

Take it easy guys and I hope everyone is well and ok

 

[Peter1986C]

In case of those having dried up haven't looked into this: the new Python-based WUs need like 7 GB or so of RAM per WU plus Virtualbox (and an increased storage limit set in your BOINC client). It works on my daily driver, but one WU at a time. Please look at my system specs if you want to know why.

 

[mstenholm]

In case of those having dried up haven't looked into this: the new Python-based WUs need like 7 GB or so of RAM per WU plus Virtualbox (and an increased storage limit set in your BOINC client). It works on my daily driver, but one WU at a time. Please look at my system specs if you want to know why.

The past 50 posts in the the support forum is about the problems with Python-based units. I think that I pass
WCG is fine as a back-up project.

 

[phill]

Well everyone, I hope that you're all doing well and ok?? Here we go for a Rosetta Pie Stats update for the 22nd December 2021......

And here we are for the milestones and stoners for the day ........

@weekendgeek !!

Great work to our lone stoner for the day.. @weekendgeek great work man!! Some very nice scores there, but I think that's two days in one, since Free-DC had the crash/issue a day or two ago.... I've just used the Free-DC stats for today as it's easier and neater, the Boinc site stats do cause a bit of a headache since they are not as clear and nice to just copy and paste Still, I hope no one minds about that

Hopefully, we'll get back to normal soon enough, a sigh of relief cast over me when I saw data going into the tables on Free-DC so I'm glad it's back up and running Here's hoping to see you all back again tomorrow for another update and catch up!! All the best everyone!! Stay safe!

 

[phill]

Well here we are with the Rosetta Pie Stats update for the 23rd December 2021.....

And now for the milestones and stoners for the day.....

@Zeke ??!!

Well done to our stoner for the day today, sadly I couldn't find them in our forum name list so if the real Zeke could please stand come, come forward or post a hello(!!) we'd be grateful and then I can tag you in whatever you manage in the team
Great to have you on board, so we all look forward to seeing you again soon

I'm not sure if there's any movement with the Rosetta issues, I had 2 work units on each machine today whilst they where on, so nothing massive or major at all which is a bit of a shame I feel... Feel free to report back anything in the thread if you experience something different with the crunching Hope to see you tomorrow again for another update. Take care and stay safe!!

 

[phill]

Well hello great people of TPU, here we are at the Rosetta Pie Stats update for the 24th December 2021.... I hope everyone is doing well and ok??

And now for the milestones and stoners for the day....

Sadly no milestones or stoners today but hey, its Christmas hols... Time for a break anyways Plus I think Rosetta servers are still having a funny 5 minutes, so we can give them a break and go do some WCG instead

Glad I finished off the last few work units I had in the PCs, just waiting for some new ones to download now... Nice work everyone, some points on the board is better than no points at all in my eyes Hopefully they'll get that sorted out soon and things will be back to normal. Not sure how fast they will being Christmas weekend and all but still Never mind!! More important things a foot at the moment!!

Hope everyone is having a good time and is alright, take care everyone!!

 

[mstenholm]

@phill you will like the next pie I think that you were the lucky one this time around. Your 6700K picked 12 WUs up, the speciel rb_12_25 (the date the WU was created). My 3900X got 6 that I will take in two batches. These rb units are not high memory units but for some reason they manage to slow down my CPU. 24 times WCG is 230 W, 20 WCG and 4 rb units is 215 W and 2 degree temperature drop (60.5°C to 58.5°C). Clock is untouched 4165 MHz.

The normal Rosetta units doesn't affect clock and energy consumption. Well it's a slow day so I had time to investigate a bit

 

[phill]

How are we doing everyone?? All well and OK I hope? Here we go for the Rosetta Pie Stats for the 25th December 2021......

And now for the milestones and stoners for the day.....

Well sadly no milestones today but then I'm not sure if we could manage one with not quite 1000 points being produced today... Shame the servers are having issues.... @mstenholm I'm not liking this pie, you aren't in it!!

Take care everyone, I hope you have had a great Christmas and are all well and turkey stuffed!! Hope to see you all tomorrow for another update, take care and hope to see you there

 

[phill]

Here we go for the Rosetta Pie Stats update for the 26th December 2021....

And now for the milestones and stoners for the day......

Sadly no one today, but there we go It's Christmas, I'm not counting!!
Nice work from @mstenholm for kicking Rosetta arse today, hopefully the rest of the team will be able to get some work units soon!! Hope everyone is doing well and is ok??

 

[phill]

And here we are again for the Rosetta Pie Stats update for the 27th December 2021.....

And now for the milestones and stoners for the day....

Sadly no stoners today, but Christmas, still not counting!!
Seriously though, with the problems that Rosetta have been having of late, I'm very pleased and proud to have members still standing by the project. The problems being faced by the team just limit the 'ass kicking' we can give it sadly So, massive congrats to those contributing to our team, couldn't be happier!!

 

[phill]

And here we are for the last update for Rosetta Pie Stats for now, the 28th December 2021 stats ......

And now for the milestones and stoners of the day....

Sadly no one today but with only one other member and myself being able to contribute, I'm not expecting it

I have been able to try this Virtuabox out with the newer Rosetta work units, so far, they use next to nothing on the CPU and they certainly don't use as much RAM as I was expecting them to, so... Not sure how the work units will go.. With 32GB of RAM in the 2700 rig, I was only able to run 11 work units at once and I had 14 being able to run (that's all it had downloaded... after I had given it more space to install/download...) 3 of those 14 units said that it was waiting for memory, not quite sure what was going on there..... I've grabbed some screen shots, I'll try and get them uploaded at some point soon for anyone interested

I hope everyone is alright and well Will make a bit more of a move on and get these updates completed, hopefully not too much longer