Zigg
New Member
- Joined
- Aug 13, 2010
- Messages
- 36 (0.01/day)
System Name | Emachines et1161-07 |
---|---|
Processor | AMD Athlon X2 4050e (2.1GHz, 1024KB L2 cache) |
Motherboard | NVIDIA GeForce 6150SE nForce 430 |
Memory | 3072MB DDR2 dual-channel capable (3 × 1024MB) |
Video Card(s) | NVIDIA® GeForce® 6150SE integrated graphics (Up to 128MB) |
Storage | 320GB SATA II (7200rpm, 8MB cache)1 |
Display(s) | Dell E193FPp [Current Res: 1280 x 1024; 32 bit; 60Hz] |
Audio Device(s) | Realtek Digital Output (Realtek High Definition Audio) |
Power Supply | 250W |
I got my computer built at local shop. I bought nice cpu, ram, motherboard and GPU. Put little thought into other stuff because they chose the rest of the gear (Power supply, networking card, dvd rom, etc.) for me.
Last year I bought a new GPU from walmart becuase I needed a quick sub when my good GPU FAIL. Now I realized the substitute GPU is only PCI not PCI-E. I have been running like this for far too long.
I may need to replace more than just the GPU. I may need to replace any number of components in my PC. Which lead me to the original question...
Do I have to run separate programs to troubleshoot every piece of hardware or Can I run software that scan it all at once?
So plz forgive me if I newb this thread, but I will log on often and do my best to report to results. Thanks in advance for any help or suggestions.
Last year I bought a new GPU from walmart becuase I needed a quick sub when my good GPU FAIL. Now I realized the substitute GPU is only PCI not PCI-E. I have been running like this for far too long.
I may need to replace more than just the GPU. I may need to replace any number of components in my PC. Which lead me to the original question...
Do I have to run separate programs to troubleshoot every piece of hardware or Can I run software that scan it all at once?
So plz forgive me if I newb this thread, but I will log on often and do my best to report to results. Thanks in advance for any help or suggestions.