- Joined
- Oct 17, 2019
- Messages
- 15 (0.01/day)
Processor | Ryzen 5 3600X |
---|---|
Motherboard | ASUS Tuf Gaming X570 Plus Wi-Fi |
Cooling | Stock Wraith Spire Cooler without Mount using a 40x40mm Innovation Cooling Graphite Pad |
Memory | 2x16gb T-force Vulcan DDR4 3200 (32GB) |
Video Card(s) | Stock/Founder Edition's RTX 2070 Super |
Storage | 256GB NvMe ADATA Xgroup M.2 SSD, External 4tb usb 3.0 Western Digital HD |
Display(s) | Acer 22" IPS 4ms 1080p75hz |
Case | DeepCool Matrexx 50 |
Audio Device(s) | Built-in Motherboard sound out to a Tribit MaxSound Plus Bluetooth Speaker through 3.5mm connect |
Power Supply | 650W 80+Gold EVGA GQ2 |
Mouse | Cheap Logitech wired mouse |
Keyboard | Cheap Logitech Wired keyboard |
Software | Win 10 1903 "Education" |
Haven't gotten my new cpu cooler yet but I got the fans. I installed two 140mm fans as exhaust on the top of the case but it didn't make a difference! In fact my cpu is acting just like it did and my gpu is actually idling at 31 to 33 now when it used to idle at 27 to 29.
Also I couldn't install my front case fans because I just cannot remove the front case. I looked up two videos and seen that they put the glass part back on after installing the fans. Is there a way I can get longer screws or something and mount them from the reverse side? Or if I can't should I send back the fans and just get two higher quality 140mm case fans with more airflow, static pressure, etc. And just make the fan closer to the front an intake and leave the one closer to the rear as an exhaust fan?
Thank you very much. I should probably look up how to undervolt my cpu because just running steam and chrome goes up to the low 80s temp wise.
Also I couldn't install my front case fans because I just cannot remove the front case. I looked up two videos and seen that they put the glass part back on after installing the fans. Is there a way I can get longer screws or something and mount them from the reverse side? Or if I can't should I send back the fans and just get two higher quality 140mm case fans with more airflow, static pressure, etc. And just make the fan closer to the front an intake and leave the one closer to the rear as an exhaust fan?
Thank you very much. I should probably look up how to undervolt my cpu because just running steam and chrome goes up to the low 80s temp wise.