cdawall
where the hell are my stars
- Joined
- Jul 23, 2006
- Messages
- 27,680 (4.27/day)
- Location
- Houston
System Name | All the cores |
---|---|
Processor | 2990WX |
Motherboard | Asrock X399M |
Cooling | CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL |
Memory | 4x16GB G.Skill 3600 |
Video Card(s) | (2) EVGA SC BLACK 1080Ti's |
Storage | 2x Samsung SM951 512GB, Samsung PM961 512GB |
Display(s) | Dell UP2414Q 3840X2160@60hz |
Case | Caselabs Mercury S5+pedestal |
Audio Device(s) | Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood |
Power Supply | Seasonic Prime 1200w |
Mouse | Thermaltake Theron, Steam controller |
Keyboard | Keychron K8 |
Software | W10P |
I have finally ordered the waterblocks for my GPU. Have three of the chinesium byski 1080Ti blocks heading this way and already got a pair of the barrow 3*120*60mm rads in as well as another pump res top.
It will be cooling 3 1080Ti's all overclocked all on stockish PCB's (2 EVGA SC blacks on titan XP PCB's and 1 FE), plan is to paint mod these so they can push higher clocks and cooling the beast that is my 2990WX. I am wanting this to be pretty quiet running using decent fans all around, but with the amount of radiator surface area I cannot imagine it will make much difference.
Current loop:
EK pump/res D5 PWM 150mL
XSPC Raystorm Neo WB
Swiftec MCR220-QP
Swiftec MCR220-QP-Stak
Swiftec MCR320-QP
Adding
EK pump/res D5 vario 100mL
3 Byski N-TITAN-PAS-X
2 Barrow Dabel-60A-360 (3*120mm*60mm thick)
HWlabs N160GTX-F2PB (2*80mm*54mm thick)
Now with this I could absolutely run the second batch as its own loop with zero effort or I could make one giant loop, I need to flush the old loop anyway, but what is the thoughts on the best performance, dual loops or single loop?
Couple of lazy pics of what we are dealing with, using the HDD mounts for the caselabs pedestal because that is all that was available. Rest of parts just set in the bottom loosely, for test fitting.
It will be cooling 3 1080Ti's all overclocked all on stockish PCB's (2 EVGA SC blacks on titan XP PCB's and 1 FE), plan is to paint mod these so they can push higher clocks and cooling the beast that is my 2990WX. I am wanting this to be pretty quiet running using decent fans all around, but with the amount of radiator surface area I cannot imagine it will make much difference.
Current loop:
EK pump/res D5 PWM 150mL
XSPC Raystorm Neo WB
Swiftec MCR220-QP
Swiftec MCR220-QP-Stak
Swiftec MCR320-QP
Adding
EK pump/res D5 vario 100mL
3 Byski N-TITAN-PAS-X
2 Barrow Dabel-60A-360 (3*120mm*60mm thick)
HWlabs N160GTX-F2PB (2*80mm*54mm thick)
Now with this I could absolutely run the second batch as its own loop with zero effort or I could make one giant loop, I need to flush the old loop anyway, but what is the thoughts on the best performance, dual loops or single loop?
Couple of lazy pics of what we are dealing with, using the HDD mounts for the caselabs pedestal because that is all that was available. Rest of parts just set in the bottom loosely, for test fitting.