- Joined
- Jun 27, 2011
- Messages
- 6,689 (1.43/day)
Processor | 7800x3d |
---|---|
Motherboard | Gigabyte B650 Auros Elite AX |
Cooling | Custom Water |
Memory | GSKILL 2x16gb 6000mhz Cas 30 with custom timings |
Video Card(s) | MSI RX 6750 XT MECH 2X 12G OC |
Storage | Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games |
Display(s) | HP Omen 27q QHD 165hz |
Case | ThermalTake P3 |
Power Supply | SuperFlower Leadex Titanium |
Software | Windows 11 64 Bit |
Benchmark Scores | CB23: 1811 / 19424 CB24: 1136 / 7687 |
I just upgraded from 4gb to 8 gb of ram. I removed my overclocking before I installed and kept it off. I installed the ram. It booted up. My motherboard recognized I had a change in memory and offered to let me change my settings. My motherboard defaults all ram to 1333mhz, so I went to change that. It is 1600mhz ram. It turned on for a literal second and turned off. Just long enough for the fans to spin up. It rebooted and repeated the process again. So I turned it off and pressed my cmos button. I narrowed down it was the speed of the ram being at 1600mhz not 1333mhz. When I try to boot with 1600mhz, if it boots, I don't get a picture. I have not tried seeing if it is a specific stick yet.
What is the best next step/s in resolving this?
What is the best next step/s in resolving this?
Last edited: