Your PC ATM

[oxrufiioxo]

What is this “Stock” that you speak of

Yessir, always overclocked

How I picture you when you get a new PC

 

[freeagent]

How I picture you when you get a new PC

View attachment 409325

That is awesome man, thank you

 

[jallenlabs]

My first YouTube Short. Here goes...
Ferrari Themed Gaming Set Up

 

[Ruru]

Am I the only TPUer who has cathodes in 2025?

...and I know that the reservoir could use a fill, I'll change things anyway soon (I'll get an EK CPU block from a friend so I need to drain the loop anyway)

 

[lexluthermiester]

Am I the only TPUer who has cathodes in 2025?

You might be! Haven't seen them in a long time.

 

[Frizz]

So I tried removing Hyte Y70's glued on dust filters on the back and top panels and just ended up mangling up the panels entirely, tired of how restrictive it was and the forced vertical GPU mount. Picked up a normalish fish tank NZXT H9 Elite and went for full function.. also skipped sleeving this time around since didnt want to spend that time again.

Resevoir and pump are under my table attached to my MORA IV.

 

[jallenlabs]

So I tried removing Hyte Y70's glued on dust filters on the back and top panels and just ended up mangling up the panels entirely, tired of how restrictive it was and the forced vertical GPU mount. Picked up a normalish fish tank NZXT H9 Elite and went for full function.. also skipped sleeving this time around since didnt want to spend that time again.

Resevoir and pump are under my table attached to my MORA IV.

I love the VGA power connection cooling!

 

[Frizz]

I love the VGA power connection cooling!

lmao thanks it's unfortunately a must for me otherwise can reach 80C during furmark since no airflow from stock cooler anymore.

 

[TommyT]

Wonder if i can call my case. a sleeper case...

 

[esserpain]

No, your eyes unfortunately aren’t deceiving you. I really am lazy enough to not only lie my PC down like a bootleg test bench, but also leave the SATA SSD hanging like that.

My alibi is that I don’t feel like screwing the mobo back in, but that’s not a good enough excuse when dust is already caking everything, lmao. Yes, I take horrible care of my tech - what about it?

So I tried removing Hyte Y70's glued on dust filters on the back and top panels and just ended up mangling up the panels entirely, tired of how restrictive it was and the forced vertical GPU mount. Picked up a normalish fish tank NZXT H9 Elite and went for full function.. also skipped sleeving this time around since didnt want to spend that time again.

Resevoir and pump are under my table attached to my MORA IV.

View attachment 409631View attachment 409630

This reminds me that a green version of HYTE’s Y70 now exists and that I can’t afford it. Maybe once I have a job again… Everything must be Anaxa-themed, after all.

 

[CarolinaKSU]

My poor naked and half put together 9950X3D build as it stands in limbo right now.

I spent the better part of a couple hours trying to troubleshoot the rats nest of PWM and ARGB cables between the built-in fan hub that came with the case and the secondary hub that came with my CPU cooler and have it pulled apart everywhere trying to make sense of what is happening. It's my first build in 14ish years and never had to deal with ARGB before. Feel like a complete idiot that I wasted all of that time to only find out that the Antec Flux Pro case's fans don't have ARGB at all, just that the hub is ARGB "ready."

Stupes.

 

[Fokker]

My poor naked and half put together 9950X3D build as it stands in limbo right now.

I spent the better part of a couple hours trying to troubleshoot the rats nest of PWM and ARGB cables between the built-in fan hub that came with the case and the secondary hub that came with my CPU cooler and have it pulled apart everywhere trying to make sense of what is happening. It's my first build in 14ish years and never had to deal with ARGB before. Feel like a complete idiot that I wasted all of that time to only find out that the Antec Flux Pro case's fans don't have ARGB at all, just that the hub is ARGB "ready."

Stupes.

View attachment 409839View attachment 409838

I'm doing similar except I have too much cables because my custom power are overly long for the new case. I'm having to really compress things down in the cable management so I can close this door in the back.

 

[Thimblewad]

I finally got 3 extra TL-P12W-S fans to put on my AIO Never enough fans!

 

[freeagent]

The OCD in me spotted the front center fan is not matching the others.. tsk tsk.

I would rotate it to appease the gods.

Looks good! I should have gotten the bigger screen.. dammit.

 

[Thimblewad]

The OCD in me spotted the front center fan is not matching the others.. tsk tsk.

I would rotate it to appease the gods.

Looks good! I should have gotten the bigger screen.. dammit.

I already turned it around, noticed it after taking the picture and it instantly triggered me

 

[freeagent]

and it instantly triggered me

Its the little things.. funny how something like that can trigger a community

 

[Thimblewad]

Its the little things.. funny how something like that can trigger a community

I have a total "wreckfest" of a case, totally mixed colors and I love the way it looks, but if ONE fan is not in the right orientation.... You're right, interesting

 

[freeagent]

Currently.. nothing has changed

Tried to get a decent shot but my knee hurts.

Its a bit dusty.. but still a pig.

 

[malons]

Enjoying summer with water...

 

[Thimblewad]

Added some red lighting, cause team red