Key features
The build
Did a little more wire sleeving and took some better
pics.
System specs
- CPU
- Intel Core i7 930 @ 4.0 GHz
- Motherboard
- ASUS P6X58D Premium
- RAM
- 12 GB Corsair DDR3 1600 MHz
- GPU
- Sapphire Radeon HD 5850 Toxic 2 GB
- PSU
- Thermaltake Toughpower 700 W
- Case
- Corsair Obsidian 800D
- Monitor
- Hanns-G HG281 28' LCD
- Sound Card
- HT Omega Striker 7.1
Performed mods
Did all of the wire sheathing and the custom liquid cooling unit.









31 Comments on The Beast
Waiting the 30min to vote !
What are your temp with "only" 1x120mm for the I7 at 4ghz ?
Run ~10pass LinX with MAX mem used.
Monitor with Coretemp on each 4 core.
Check here for looks
and maybe reroute the tubing and put in a fill and drain port.
Rate mine if you get the chance.
www.techpowerup.com/gallery/2608.html
TY for your Vote! What a beautyfull licquid cooled Obsidian. And verry nice sleeving!
only sleeves
I really like this case, the thing that stands out most to me is the color of the liquid. What is this?? Also, for everybody that is oohing and ahhing over the wire sleeving. Those are extensions that you can buy from frozencpu.com. They are pre-made and you just plug them up in between the board and the actual connector.
And for your information I sleeved every wire myself. You don't have to ooh and ahh
at it but it's a fact. I wouldn't have that cheap ass looking shit from frozencpu.
Also I have bought a new Silverstone Strider 1000 watt full modular psu. I have sleeved
the entire thing in black and UV green. Also put UV green fluid in the cooling system, and
added UV lights. I will be posting pics as soon as I am completely done.
24 pin it was too short for my case. So I did put all new black wires and recripmed them all
and then sleeved it. Takes some patience but it goes fast once you get the hang of it. Here
are the tools I used.
en.mdpc-x.com/mdpc-sleeve/sleeve-kits-+-tools/sleeve-tools.htm
Got the sleeve from the same place in Germany. I have never seen this good of quality
anywhere in the states.
en.mdpc-x.com/mdpc-crimping/mdpc-crimping-tool.htm
They have the crimper and the contacts. If you order from them I would suggest getting
plenty of everything because the shipping ain't cheap.
ever so slightly a little at a time until it fits flush. That is the only flaw with this
case.
knew that people would be packing that area with lots of wires.