Enermax at the 2026 Computex showed off its latest cooling, casing, and power supply innovations. The most interesting exhibit is its PFA (pump-free AIO) liquid CPU cooler. This closed-loop liquid CPU cooler uses Daikin's DAISAVE SF-49, a coolant that vaporizes at 49°C, and uses vapor pressure to circulate itself within the loop, all the way from the block to the radiator, where it's condensed, and returned to the block. A PFA with 360 mm radiator is capable of handling thermal loads of up to 900 W TDP, Enermax claims.

Enermax also demonstrated Daikin's DAISAVE SF-49 in a sealed, liquid-immersion case called Cirrus Mk II. The non-conductive liquid is seen bubbling into vapor since the components are hotter than 49°C. The vapors then make their way to a heatsink that transfers heat to air via ventilation. The condensate then makes its way back down. Sticking with cooling products, Enermax unveiled its PF-II series 120 mm fan. This 28 mm-thick fan offers industrial-grade performance, and is recommended for radiator applications. It uses a liquid-crystal polymer impeller, a 6-pole motor, and hydro dynamic bearings. The frames of these fans are made of an aluminium alloy.

ENERMAX, an industry-leading force dedicated to designing high-performance power supply and cooling solutions, proudly announces the launch of the new EB Bronze Series Power Supply, offering exceptional stability, efficiency, and quiet operation for mainstream PC builds. The series is available in 550 W and 650 W models globally, both compliant with the latest Intel ATX 3.1 standard, while a 450 W model (ATX 2.52) will be available in selected regions.

Efficient and Reliable Power Delivery
EB Bronze Series is 80 Plus Bronze certified, ensuring up to 88% efficiency under typical loads and helping users keep energy use low while maintaining reliable performance. Built with 100% industrial-grade Japanese capacitors, EB Bronze Series guarantees long-term durability and consistent output even under continuous operation. Each unit is equipped with an ultra-quiet 120 mm hydraulic bearing fan for superior cooling performance with minimal noise, making it ideal for users who seek silent operation without sacrificing thermal stability. The single +12V rail and DC-to-DC design further enhance voltage regulation and overall system reliability.

ENERMAX, an industry-leading force dedicated designing high-performance computer hardware and cooling solutions, proudly announces the launch of the REVOLUTION III S 1000 W, a premium fully modular power supply designed to meet the latest standards in performance, reliability, and aesthetics. Available in both black and white, the REVOLUTION III S 1000 W offers enthusiasts and professionals the flexibility to build powerful systems without compromise. The REVOLUTION III S comes with a 13-year warranty that highlights ENERMAX's confidence in the product's reliability and long-term durability.

The newest addition to the REVOLUTION line is 80 Plus, Cybenetics, and PPLP Platinum certified, ensuring outstanding efficiency and reduced power consumption. Fully compliant with the Intel ATX 3.1 standard, the REVOLUTION III S guarantees stable and reliable power delivery for not only the latest generation of high-performance graphics cards and CPUs, but also the upcoming generations too. Equipped with one 12V-2x6 interface, the REVOLUTION III S 1000 W can deliver up to 600 W of dedicated power to the latest GPU, making it future-ready for enthusiast builds.

Enermax, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, Enermax, a leading manufacturer of high-performance PC hardware, proudly announces the launch of its latest flagship power supply, PlatimaxII 1200DF 1200 W ATX 3.1 power supply, available in black and white. Designed for enthusiasts, gamers, and professionals, PlatimaxII 1200DF combines cutting-edge efficiency, stability, and aesthetics to meet the demands of next-generation systems. PlatimaxII 1200DF comes with a 13-year warranty that highlights Enermax's confidence in the product's reliability and long-term durability.

Power Refined for the Next Generation
Fully compliant with Intel ATX 3.1 and certified by both 80 Plus and Cybenetics Platinum, PlatimaxII 1200DF delivers exceptional energy efficiency and consistent power output. Its native 12V-2x6 cable supports up to 600 W power delivery to the GPU, ensuring seamless compatibility with the latest and future high-end graphics cards.

Enermax at the 2025 Computex showed us several of its latest innovations with PC and workstation cases. We begin our tour with an attraction in the Enermax booth—a fluorinated liquid immersed workstation that implements a copper foam-lattice heatsink that dissipates heat from a Ryzen Threadripper PRO 7000 processor and as many as four high-end GPUs, to the immersion fluid. Next up, is the Studio-G, a production eGPU enclosure Enermax co-designed with Sparkle. The enclosure features an 850 W ATX 3.1 power supply that can feed a graphics card with a 600 W 12V-2x6 connector or 3x 8-pin PCIe power, while the PCI-Express 4.0 x16 slot (electrical x4) puts out an additional 96 W. The enclosure features a bridge chip that converts the PCI-Express 4.0 x4 to a Thunderbolt 5 interface, which includes support for 120 Gbps host-to-GPU and 40 Gbps GPU-to-host asymmetric bandwidth boost. The demo unit was shown featuring a PowerColor RX 9070 XT Red Devil with 3x 8-pin PCIe power.

On our way to the company's main case stand, we also spotted the Enermax Open Frame system, targeting enthusiasts and overclockers. It suppors motherboards as large as E-ATX, and was demoed with a Xeon W-3595X based workstation build with an RTX 5090. The EL 501A Air and EL 600A Scenic are ATX mid-tower cases. The Scenic comes with tempered glass front panel that curves along the edges, while the Air comes with a mesh intake. The Scenic comes with up to 9 fan mounts, while the Air comes with 12. Both cases offer up to 43 cm of clearance for graphics cards, and up to 16.5 cm clearance for CPU coolers. You get a spacious crawlspace behind the motherboard tray for better cable management, and modern front-panel features such as USB 3.2 type-C. Both cases come in white and black trims.

Enermax CPU and case cooling product lineup shown at Computex 2025 is led by the Aquasoar series. The Aquasoar 360 is the company's premium AIO CLC featuring a pump-block with not one, but two displays. The larger 3.5-inch main display is along the top of the pump-block, while the smaller 2.4-inch one moves on a hinge—you can have it face the top, or the side. Each of the three 120 mm radiator fans comes in a uniquely designed fan frame, and implements daisy-chaining to reduce cable clutter.

The Aquasoar ACS 360 is a step up from the Aquasoar 360, with three exclusive features—its cold plate implements AeroCore Structure (ACS), which extends the copper cold-plate with an extruded aluminium heatsink. A 70 mm fan sits on top of this heatsink, airflow from this fan not just dissipates heat from this heatsink, but also cools the VRM area. The third exclusive feature is its 360 mm x 120 mm compound fan replacing the daisy-chained 3x 120 mm, which further reduces the cable clutter. Each impeller can push up to 82 CFM of airflow.

Enermax at the 2025 Computex showed us their latest PSU products, led by the Platimax II series, which meets ATX 3.1 and PCIe 5.1 specs, and offering 80 Plus Platinum switching efficiency. The series is led by the Platimax II 2400DF, a 2400 W PSU designed for workstations that have up to four high-end GPUs for AI inferencing. The PSU puts out four 600 W rated 12V-2x6 power connectors, and uses what looks like a dual +12 V rail design. It uses a 140 mm double ball-bearing fan to keep cool, and includes a fanless mode up to a certain load percentage.

Positioned just a notch below this is the Platimax II 1600DF, a 1600 W PSU that puts out two 600 W rated 12V-2x6 connections, and comes in the same 18 cm-long body as the 2400DF, using a 140 mm double ball-bearing fan, and including a fanless mode. Below the 2400DF and 1600DF are a trio of performance-segment variants, which include the 850DF, the 1000DF, and the 1200DF. These three come in a smaller 15 cm-long body, use 135 mm double ball-bearing fan, and each of the three puts out a single 600 W rated 12V-2x6.

ENERMAX has silently launched the ETS-T41 tower CPU cooler series composed of 3 slightly distinct versions: ETS-T41 Digital ARGB, ETS-T41 Digital and ETS-T41. All 3 CPU coolers have the same base specifications with the main differences in the cooling fans, the exterior coating and the additional digital display panel. Measuring 157 mm in height, they feature four Ø6 mm copper direct contact heat pipes, two 120 mm fans and an aluminium fins radiator capable of achieving up to 250 W TDP.

As mentioned, one of the features that differentiate the 3 versions is the fans. The Digital ARGB and Digital versions use Fluid Dynamic Bearing (FDB) fans, while the basic model uses Hydro Dynamic Bearing (HDB) fans. Moreover, the two 120 mm fans have slightly different characteristics in the "Digital" versions: one has 600-1600 RPM speed with up to 69.63 CFM and a maximum noise of 25 dB(A), while the second fan has a speed of 600-1400 RPM with up to 56.53 CFM and 23.5 dBA (Max). The ETS-T41 uses the more economical option with two identical 120 mm fans at 600~1600 RPM speed with up to 69.63 CFM and a maximum noise of 25 dB(A). Another feature is the digital panel that monitors and displays CPU and GPU temperatures or fan speeds.

ENERMAX is proud to be launching its new workstation-level CPU AIO cooler: LIQTECH XTR. Specifically designed for the AMD Ryzen Threadripper and Intel Xeon W series processors with a cooling capacity of over 550 W. LIQTECH XTR AIO cooler debuted at Computex 2024 with a live demo, achieving a cooling capacity of over 550 W. The LIQTECH XTR 360 mm CPU cooler features an enlarged cold plate design on its water block, fully covering the IHS area of both AMD Threadripper and Intel Xeon W series processors. Thanks to ENERMAX's high-efficient EP1 pump with a 450L/h flow rate and 3000 RPM radiator fans, LIQTECH XTR can provide more than 550 W cooling capacity on both AMD and Intel platforms.

LIQTECH XTR AIO cooler is also the first ENERMAX CPU cooler to implement the magnetic, fully rotatable, real-time status digital display. Users can manually adjust the LED screen on the water block to set their preferred digital direction. The additional software, ENERMAX's tuner, can further provide a real-time data showing on the water block. ENERMAX's LIQTECH XTR AIO cooler is the perfect cooling solution for workstations that need to perform heavy duty tasks such as 3D rendering, product visualization & simulation, artificial intelligence (AI), and machine learning acceleration. It fully supports AMD socket sTR5/SP6/sWRX8/sTRX4/TR4/SP3 and Intel socket LGA 4677.

ENERMAX, an industry-leading force dedicated to design high-performance computer hardware and cooling solutions, announces its new 80 Plus Gold power supplies: REVOLUTION III and CyberG II series. Integrated with Intel ATX 3.1 and offering a max. 600 W 12V-2x6 cable, the new PSUs deliver competitive price-to-performance ratio to mainstream gamers. The REVOLUTION III series offers a fully modular design with premium individually mesh-sleeved cables and cable combs for effortless cable management. The 120 mm Fluid Dynamic Bearing (FDB) fan ensures quiet operation, while the 100% Japanese capacitors guarantee long-lasting durability. The series is available with 650/750/850 W models.

The CyberG II series provides a non-modular solution with a sleek all-black flat cable design for easy installation. It is equipped with 100% Japanese capacitors and a 600 W 12V-2x6 cable for 750/850 W models while maintaining the trusted ENERMAX quality.

You've seen Splave on top of overclocking leaderboards, get ready to see him on PC hardware store shelves. The professional overclocker now has a line of high-end PC memory kits and power supplies in partnership with G.Skill and Enermax. The new Enermax Revolution DFX Pro 1350 W Splave Edition (the show demo was a different model as proof of concept) has a few features custom designed by him. The first one is a button that flushes all capacitors to make sure there's no residual power left in it when the AC input is switched off. Overclockers tend to need this between resets, and even waste a few seconds waiting on their PSUs to drain, or getting their motherboards to do that job (not recommended). The PSU has individually sleeved cables that are designed to not get in the way, and make them easier to manage; and the fan is configured to turn backwards for 20 seconds, blowing air out, each time the PSU is sent an ACPI shutdown command.

ENERMAX, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, announced that its CPU cooler product line now supports the new generation Intel processor socket, LGA1851. The new generation of Intel CPUs utilizes the LGA1851 socket, which is compatible with existing LGA1700 CPU coolers. Therefore, users with ENERMAX CPU coolers can directly upgrade to the new generation Intel platform.

ENERMAX provides a comprehensive range of CPU cooling solutions with a maximum thermal design power (TDP) of up to 420 W, successfully unleashing CPU performance and enabling fast processing capabilities during multitasking.

In addition to the new PC cases and PSUs, ENERMAX also unveiled a couple of new and interesting AIO CPU coolers and fans at the Computex 2024 show, including the LIQTECH XTR AiO which can handle quite a high thermal load, the new AQUACore concept, which is actually a compact CPU cooler that integrates the pump and the radiator into a compact solution, and new Montage Flow fans with magnetic daisy-chaining.

The one that piqued our interest is definitely the LIQTECH XTR AIO liquid CPU cooler series, which can handle some impressive thermal loads. To be available in 240 mm, 280 mm, and 360 mm radiator sizes, the LIQTECH XTR can easily AMD Threadripper and Intel Xeon processors, offering 100 percent coverage and uses a powerful EF1 pump in combination with patented shunt-channel technology. According to Enermax and what we saw at the show, the smaller 240 mm can handle well over 500 W of thermal load, while the 360 mm one goes well over 900 W. The LIQTECH XTR also includes a digital built-in display on the pump/block unit, which shows CPU and GPU temperature, or fan RPM data.

ENERMAX unveiled a couple of new PC cases at the Computex 2024 show, including the Air240 mid-tower case, the Pano270 and the Pano D58. The new cases feature enhanced cooling performance, modular internal structure for easier installation and cable management, as well as support for motherboards with back connectors.

The new ENERMAX Air240 is a mid-tower case supporting up to ATX motherboards, and featuring standard three-side mesh panel design, which should enhance overall cooling performance, according to ENERMAX. The Air240 is pretty much a standard PC case, but it does have a unique feature which allows the PSU compartment baffle to be redirected in order to provide more airflow to the graphics card. The new ENERMAX Pano270 and Pano D58 PC cases certainly attracted a lot of attention as these are following the current design trend with a 270-degree curved glass panel, which provides a panoramic view of key hardware. The Pano270 supports motherboards with backside connectors, and while it is a smaller case that supports up to a Micro-ATX motherboards, it still supports up to 360 mm AIO coolers and up to nine fans. It also has 37 mm of cable management space, and can support up to 170 mm tall CPU air coolers. The Pano D58 is a slightly different and bigger counterpart and while it has the same panoramic glass, it isn't a curved one. Of course, since it is bigger, it supports ATX motherboards, up to 360 mm AIO coolers on the side and top, and up to nine fans. It supports up to 250 mm long PSUs, up to 420 mm long GPUs, and up to 180 mm tall CPU coolers. All three CPU cases should be available soon.

ENERMAX showcased several new power supply units at the Computex 2024 show, all including ATX 3.1 standard with a 600 W 12V-2x6 cable and capable of handling up to 235% power excursion. The new PSUs will come in 80 Plus Titanium, Platinum, and Gold certifications, and various power outputs, reaching an impressive 2,400 W. Of course, ENERMAX was keen to outline the collaboration with overclocker, Splave, with the new REVOLUTION D.F. X PRO Splave edition power supply that comes with 5VSB Discharging Function.

The stars of the show are definitely the new MaxTytan Digital 1650 W 80 Plus Titanium and the new Platimax 2400 W 80 Plus Platinum PSUs. The MaxTytan Digital 1650 W 80 Plus Titanium features ATX 3.1 standard and uses a semi-fanless design, which means it does not spin up the fan under 60 percent load. It also comes with a built-in wattage display on the rear side, and a fully modular design. According to ENERMAX, the MaxTytan Digital delivers 1650 W at 80 Plus Titanium efficiency and can reach up to 2000 W at 80 Plus Gold efficiency (230 V only). In addition, the new Platimax 2400 W 80 Plus Platinum PSU delivers 2,400 W of continuous power, and does so with maintaining standard 18 cm depth, allowing to fit into mid-tower cases. It also has a fully modular design, offering more PCIe, 12V-2x6, and other connectors than most motherboards on the market. It also features ENERMAX semi-fanless design, keeping the fan off under 60 percent load.

ENERMAX today announced the showcase of a new series of ATX 3.1 power supplies at Computex Taipei. The lineup features efficiency levels spanning 80 Plus Titanium, Platinum, and Gold, with wattage reaching up to an impressive 2400 W. Additionally, ENERMAX will demonstrate the LIQTECH XTR, a workstation-grade CPU cooler, and unveil an innovative new CPU cooling concept that combines the benefits of both AIO and air cooling solutions. Furthermore, ENERMAX is excited to announce a collaboration with the world's top overclocker, Splave, to launch the REVOLUTION D.F. X PRO Splave edition power supply, with an exclusive 5VSB Discharging Function.

Continuing its pursuit of excellence and innovation, ENERMAX introduces the MaxTytan Digital 1650 W 80 Plus Titanium power supply at Computex 2024 Taipei. This power supply adheres to the ATX 3.1 standard and incorporates an intelligent semi-fanless design where the fan remains static until the power supply operates at 60% load, optimizing both performance and acoustics. Additionally, the power supply is equipped with a built-in wattage display on the rear side, allowing users to obtain real-time output wattage information without the need for additional software. The MaxTytan Digital delivers 1650 W at 80 Plus Titanium efficiency and can reach up to 2000 W at 80 Plus Gold efficiency (230 V only).

ENERMAX, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, introduces its latest mid-tower ATX PC case series, ENERMAXK8, boasting a sleek and sophisticated design. Featuring a sophisticated front panel design and robust construction, the ENERMAXK8 exudes a contemporary aesthetic with its tempered glass front and side panels, offering a sleek showcase for the internal components of your build. Equipped with three pre-installed ARGB PWM fans and a built-in 6-port control hub, users can seamlessly synchronize their ARGB components with the system lighting effects using either motherboard ARGB software or the 21 built-in lighting presets.

ENERMAXK8 incorporates clever design elements for convenient system assembly. It features a built-in fan bracket within the front panel, allowing users to effortlessly install three 120 mm fans on one side of the bracket and a 360 mm radiator for an AIO cooler on the opposite side. The included thumb screws can further simplify the installation process. Front panel connectivity options are one USB 3.2 Gen 2 Type C port and one USB 3.2 Gen 1 Type A port.

ENERMAX, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, announces its latest power supply and the PCMag CES 2024 Best Power Product award winner, the PlatiGemini 1200 W, is now available. The PlatiGemini sets a new standard as the only 80 Plus Platinum power supply that supports both Intel ATX 3.1 and ATX12VO standards. Designed for system integrators and professionals working on mission-critical projects, this revolutionary 12VO power supply, which removes the 3.3 V and 5 V lines, will reduce losses from energy conversion and align your workstation with stricter environmental standards.

World's First Dual-Standard 12VO Power Supply
The PlatiGemini, as the world's first dual-standard power supply, supports both 24-pin mainstream motherboards and 10-pin energy-saving 12VO motherboards, offering versatility for current and future technological requirements. By supplying only 12 volts to the system components, the power supply eliminates the need for conversion to other voltage levels, reducing energy loss and improving overall energy efficiency. And with the support of the 24-pin mainstream motherboards, it ensures adaptability to any current or future tech needs, bridging the gap between different specifications, and being ready for sustainable computing.

ENERMAX, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, launches its latest power supply series, the REVOLUTION D.F. 12, the world's smallest ATX 3.1 power supply with only 122 mm in-depth. This design maximizes space for airflow within PC cases while delivering robust power in line with the ATX 3.1 specifications, including up to a 235% power excursion. Equipped with a 600 W 12V-2x6 cable, the REVOLUTION D.F. 12 ensures uncompromised performance for high-end graphics cards and cutting-edge AI computing. The REVOLUTION D.F. 12 also fits seamlessly into micro ATX cases, providing ample room for efficient cable management.

Committed to sustainable computing, REVOLUTION D.F. 12 offers a highly technical power solution aimed at enhancing power conversion efficiency and reducing carbon emissions. This commitment to sustainability is further demonstrated in the product's shipping and packaging innovations. The REVOLUTION D.F. 12 features an innovative 115 mm dual-ball bearing fan with ENERMAX's patented Dust-free Rotation (D.F.R.) technology, providing a self-cleaning function and an activated switch button to enhance system longevity by minimizing dust accumulation inside the power supply. The power supply operates in fanless mode when under 50% load, ensuring complete silence at low and medium workloads. Additionally, users will be able to manually activate the D.F.R. function using the D.F.R. switch button, which can also serve as a power-on indicator.

ENERMAX, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, today announced the launch of the ENERPAZO EP237 mini-tower PC case. This new offering provides efficient cooling support and expandability. It is compatible with an ATX motherboard and allows for the installation of an AIO cooler with a radiator measuring up to 360 mm in length and 38 mm in thickness. The ENERPAZO EP237 comes equipped with one ARGB fan, seven reusable PCIe slots, and a magnetic transparent full-view tempered glass side panel equipped with a convenient handle pull ring for easy access. These features make the ENERPAZO EP237 an ideal computer case for PC DIY newcomers.

Key features and benefits of the ENERPAZO EP237 include:

• Compact Chassis Design: The ENERPAZO EP237 is a mini-tower case with dimensions of 410 mm (D) x 210 mm (W) x 450 mm (H)
• Advanced Cooling Support: It supports a 360 mm AIO CPU cooler with a 38 mm thick radiator and up to eight fans, including one pre-installed ARGB fan for enhanced airflow.
• Superior Expandability: Accommodates ATX motherboards and up to four drive installations, along with seven reusable PCIe slots for extensive customization.
• User-Friendly Features: Features include a handle pull ring on the magnetic transparent tempered glass side panel, ENERMAX cable ties for organized cable management, and dust filters on the top panel for maintenance ease.
• Broad Compatibility: Supports graphics cards up to 365 mm in length (without radiator) and CPU air coolers up to 162 mm in height, ensuring compatibility with a wide range of components.

Cooler Master has sued SilverStone, Enermax, and their common OEM, the Guangdong China-based Apaltek, for patent infringement of designs of their all-in-one, closed-loop liquid CPU coolers. The company has moved the United States District Court in the Central District of California, against the three companies for alleged IP violation in the design of its AIO CLCs. Cooler Master alleges that the three companies violate U.S. Patent numbers 10,509,446; 11,061,450; and D856,941 held by it. The infringing products referenced in the Lawsuit are SilverStone IceMyst 240, PF240, PF240W, IceGem 360, VIDA 240 Slim, and RGB Controller, and the Enermax Aquafusion ADV, Liqmax III ARGB, Liqtech 360 TR4 II Slim, and RGB Controller. Apaltek doesn't have any products in the retail channel under its own brand, but is being sued as the original technology supplier for SilverStone and Enermax.

Specifically, the Cooler Master suit alleges that the pump-inside-radiator design choice is a Cooler Master invention; as is the ARGB mini-controller. It also alleges infringement in the essential design of the coolers. It seeks damages and legal costs in Relief. One of the three defendants has reached out to TechPowerUp with a comment, in which it says that it finds it interesting that Cooler Master, which itself defended a similar patent infringement lawsuit against Asetek in 2016-17 would go on to allege patent infringement with smaller competitors such as Enermax and SilverStone, while leaving out certain other customers of Apaltek, such as MSI. They stated that they intend to defend their designs in the Court. This defendant termed Cooler Master's behavior as being that of a "bully."All pages from the Cooler Master lawsuit follow.

In addition to the new AIO coolers and PSUs, ENERMAX brought a full lineup of new PC cases to the CES 2024 show, including the new ENERPAZO lineup, the new EK98, and the SK30 V2 PC cases. The ENERPAZO lineup with the ENERPAZO EP33 mid-tower and the ENERPAZO EP23 mini-tower PC cases, and the EK98 mid-tower PC case, all come with built-in USB 3.2 Gen 1 and USB 3.2 Gen 2 Type C ports and reusable PCIe slots, as well as feature recognizable ENERMAX design with grill front and glass side panel.

The ENERPAZO EP33 supports up to an E-ATX motherboards, has support for a 420 mm AIO liquid CPU cooler and up to 11 fans, while the ENERPAZO EP23, as mini-tower PC case, supports up to a micro-ATX motherboard and a 360 mm AIO liquid CPU cooler and up to 8 fans. The EK98 supports up to a 360 mm AIO liquid CPU cooler and up to 9 fans, as well as comes with vertical GPU installation support with rotatable PCIe slots and pre-installed 4 ARGB PWM fans. ENERMAX also showcased the new SK30 V2 PC case mid-tower PC case which also comes with USB 3.2 Type-C ports, supports up to 360 mm AIO liquid CPU cooler ass well as comes with the same vertical GPU installation support and couple of pre-installed ARGB PWM fans.

ENERMAX has showcased its new power supply lineup at the CES 2024 show in Las Vegas, including the new PlatiGemini and REVOLUTION D.F. 12 PSU series. The new PlatiGemini series is certified with Intel ATX 3.1 and ATX12VO compliance and features 80 Plus Platinum efficiency. What makes it special is the fact that it comes with both 24-pin ATX and 10-pin 12VO connectors, ensuring support for both current and future updates as well as bridging the gap between specifications. The ENERMAX PlatiGemini is a full modular PSU that comes will initially be available with 1200 W power output, uses 135 mm dual-ball bearing fan with patented Dust-free Rotation (D.F.R.) function, and comes with individually sleeved cables.

In addition to the new PlatiGemini PSU series, ENERMAX new REVOLUTION D.F 12 series which has been announced at CES 2024 show is one of the smallest ATX 3.1 power supply units on the market, where the 750 W version measures just 122 mm in depth. This means that it can also be installed in a Mini-ITX case without an additional SFX to ATX mounting bracket. As said, the REVOLUTION D.F 12 series meets Intel's ATX 3.1 standard, has 80 Plus Gold efficiency, and comes with native 600 W 12VHPWR connector. It uses a 115 mm dual-ball bearing fan with the same Dust-free Rotation (D.F.R.) function, features a silent mode where the fan is switched off below 50 percent power load.

At the CES 2024 international show, Taiwanese company ENERMAX unveiled new all-in-one (AIO) CPU liquid coolers targeting both mainstream and high-end markets. First in line is the AQUAFLO LCD, which features a removable 5-inch 800x480 resolution magnetic LCD display, allowing monitoring of temperatures, fan speeds, and pump RPM, with the ability to stick on cases or use it as a desktop display. Supporting up to 400 Watt TDPs, the dual-chamber pump design provides flow rates up to 450 liters per hour. The 240 mm and 360 mm radiators use flat 20 mm-thick cooling tubes and ENERMAX Shunt Channel cooling technology for efficient heat transfer. This enables handling the latest overclocked gaming CPUs.

For professional workstations and servers, the LIQTECH XTR 280 and 360 models offer full coverage and 500 Watt+ TDP capacity for the latest AMD Threadripper Pro and Intel Xeon CPUs using larger CPU sockets. An integrated 2.4-inch digital OLED screen directly on the block reports real-time core temperature readings and warnings. A ceramic bearing pump design also pushes 450 liters per hour for cooling under heavy rendering or data center workloads. The LIQTECH XTR ensures professionals can rely on enhanced durability for mission-critical hardware. The new AIO coolers will be available in Q2 2024 through major retailers.

ENERMAX, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, today announced the new StarryKnight SK30 (SK30 V2) mid-tower PC case, a follow-up and upgrade of its last-generation SK30 PC case.

The SK30 V2 comes with three pre-installed 140 mm and one 120 mm ENERMAX SquA RGB ADV fans with PWM function. The SquA RGB ADV fan, as one of ENERMAX's most powerful ARGB fans, delivers 40% stronger airflow than other regular-case fans with an enlarged blade surface. The combination of air-inlet and vortex-frame design will not only bring in more air but also direct and concentrate airflow across the system's components.