News Posts matching #GitLab

Return to Keyword Browsing

Valve Publishes Steam Frame CAD Files for DIY Accessories and Tweaks

Valve has finally released the CAD files for its Steam Frame VR headset and VR controllers, officially allowing modders and creators to create and publish their own Steam Frame accessories—as long as they're published under the correct Creative Commons Attribution Non-Commercial Share Alike 4.0 International license. The CAD files are published on GitLab, and they include both 3D models and technical drawings and documentation for reference when designing accessories.

The CAD files also include documentation on the electronics of the Steam Frame, including an example project documenting a USB 3.0 expansion port that could be adapted for other electronics projects. While Valve hasn't granted a sweeping explicit license to create commercial projects for the Steam Frame, it notes on the Frame's GitLab repo that "if you wish to pursue a commercial license please reach out to us at steamframecompatible at valvesoftware com," ostensibly opening the door for licensing partnerships.

Devs Port Open-Source Linux AMD Graphics Driver to Windows

The AMD RADV driver is an open-source driver in the Mesa 3D graphics library optimized for running Vulkan games and software. RADV is the default Linux graphics driver on many AMD-powered Linux systems. Until now, Windows has had no open-source drivers for any GPU maker, but Valve is apparently looking to change that by funding development of the AMD RADV driver for Windows.

The actual driver porting is being done by Collabora, who often works with Valve on low-level software development, but Valve has sponsored the first phase of the project, according to a recent blog post by Collabora. The development outfit explains that it has managed to run Counter-Strike 2 on the new driver, but that there are still challenges that need to be solved. One of those challenges holding development back.

Valve Dev Launches DIY "Inkterface" Steam Machine E-Ink Front Panel

One of the details that got gamers excited around the time Valve announced the Steam Machine was the inclusion of an e-ink panel that was shown off in the console's announcement video, which we later discovered would not be commercially available. Following the e-ink panel hype and the official launch of the Steam Machine, NaKyle Write, a Valve contractor, has officially published a GitLab page detailing a DIY Inkterface panel, which gives gamers the ability to build the e-ink panel as long as they have access to parts and a soldering iron, and the ability to combine the two. The GitLab post lists all the necessary parts, but it requires some knowledge of the Linux AppImage packaging format and building and flashing firmware for the e-ink panel.

Valve says that it has In total, the BOM cost comes out to around $88.15 using the sources Valve lists in the GitLab instructions, although it's likely that the parts or 1:1 alternatives could be acquired more affordably on sites like AliExpress. The most expensive component is the 5.83-inch e-ink display, at $49.95. The Steam Machine Inkterface panel is technically an independent peripheral in that it does not need the Steam Machine to display an image. As such, it connects to the Steam Machine with a BLE connection, and it is controlled by the Steam Machine using an app, which currently needs to be compiled as an AppImage but will later be shipped on Steam. The Inkterface panel can display a number of system stats or custom layouts and images created in Lunacy, an open-source Figma alternative.
Return to Keyword Browsing
Nov 22nd, 2026 09:37 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts