News Posts matching #Quantum Line

Return to Keyword Browsing

EK Launches a Stand-Alone Momentum Monoblock for MPG Z590 Gaming Carbon

EK, the premium liquid cooling gear manufacturer, releases a stand-alone Momentum Monoblock for the MSI MPG Z590 Gaming Carbon - a motherboard based on the Intel Z590 chipset. The EK-Quantum Momentum MPG Z590 Gaming Carbon monoblock is made available in transparent Plexi version and features addressable D-RGB LEDs compatible with MSI Mystic Light software enabling full lighting customization for every single diode, at any given time. This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Intel Socket 1200 Series Processors. The monoblock covers the entire VRM section of the MSI MPG Z590 Gaming Carbon motherboard. It also has an integrated flow indicator that provides an instant overview of loop operation and coolant flow.

This monoblock boasts the latest generation Velocity cooling engine, used in the EK Quantum Lineup to ensure the best possible CPU and MOSFET cooling without reducing flow to other components. Liquid flows directly over all critical areas providing enthusiasts with an excellent solution for high and stable overclocks. Like every EK monoblock, this one also features a high flow design easily used in systems with weaker water pumps or lower pump speed settings. TIt comes with sophisticated addressable D-RGB lightning, which connects to a standard 3-pin 5 V D-RGB addressable header on the MSI MPG Z590 Gaming Carbon motherboard.

EK-Quantum Velocity² D-RGB - New LGA 1700 CPU Water Block Ready for Alder Lake

After the long reign of the most popular water block on the market, the EK-Quantum Velocity, it's time to push the boundaries yet again and step into the future. Enter the next generation EK Quantum Line water block - the EK-Quantum Velocity². The water block showcases the EK-Matrix7 initiative, a standard where increments of 7 mm manage the height of products and the distance between ports. This product uses a socket-specific cooling engine to ensure the best performance and optimal flow with low restrictions on every platform. Three years after the original Velocity water block launch, EK is officially launching the Velocity² 1700, which is engineered for the Intel LGA 1700 socket and Alder Lake series desktop processors. Other Velocity² CPU water blocks will also follow shortly, tuned specifically for each CPU socket and IHS geometry on the market.

This new water block kept the name "Velocity" because it retained the ability to be responsive and agile in the world of liquid cooling. Embedded in the Velocity² is a next-generation EK CPU water block cooling engine that is socket-specific. A combination of mounting pressure and cold plate geometry, tailored for the IHS and die layout of Intel LGA 1700 socket processors, is used to achieve low hydraulic flow restriction and high performance. Thе lathe-turned cold plate is made with precision to cover the IHS effectively and put optimal pressure on the die area.

EK Launches Quantum Vector Active Backplate Waterblocks for MSI Trio and Suprim RTX 3090/3080 GPUs

EK, the leading computer cooling solutions provider, is introducing another long-awaited addition to the EK Quantum Line. The EK-Quantum Vector TRIO RTX 3080/3090 active backplate is made to complement the existing EK-Quantum Vector TRIO RTX 3080/3090 water blocks and actively cool the backside of MSI TRIO and SUPRIM GeForce RTX 3080 and 3090 GPUs.

EK-Quantum Vector TRIO RTX 3080/3090 Active Backplate links the water block and active backplate with a new terminal, which replaces the stock terminal that comes with your water block. This way, the whole enclosure requires only one inlet and one outlet, removing unnecessary additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks, allowing maximum cooling.

EK Vector FE Special Edition Water Block and Torque Fittings win iF Design Awards

With last year's success of the EK-Quantum Magnitude CPU water block, the EK-Quantum Line has received two new iF DESIGN AWARDS this year. In the Gaming Hardware product category, one was granted to the EK-Quantum Vector FE Special Edition GPU water block. It is the most complex GPU water block enclosure as a cooling solution that EK has developed to date. It was engineered for the latest NVIDIA GeForce RTX 30 series Founders Edition graphics cards and comes with a backplate that makes sure the entire graphics card is enclosed and not visible at all.

Forming a halo product for the Vector family of GPU blocks, the FE Special Edition came with a distinctive set of challenges. Built as an aftermarket product for Founders Edition RTX 3080 and RTX 3090 graphics cards, the block had to negotiate the irregular PCB shapes and unorthodox assembly. However, as a result of these challenges, several design opportunities were leveraged to create a totally unique and unprecedented GPU water block. A solid aluminium exoskeleton forms a cradle in which the cooling and lighting are embedded, revealing only the most beautiful elements to the user.

EK Water Blocks Outs EK Lignum Walnut-covered RTX 30-series Water Blocks

EK, the leading premium liquid cooling gear manufacturer, announces the launch of a new addition to the Signature Edition product portfolio - the EK Lignum. It is inspired by our founder's love for woodwork and modern computer technologies and named after the Latin word for wood. A perfect symbiosis of the oldest natural building material and contemporary high-end cooling solutions. An unparalleled example of how your PC can reflect your lifestyle. The Lignum line and its wooden opulence can bring a feeling of comfort and warmth to your home while keeping your PC cool and silent for its maximum possible performance.

The choice of wood is walnut (Juglans Nigra) because it never fails to surprise with its colors and texture. The connection between the water block and the wood enables wood to shrink and expand, which is one of its most natural predispositions in response to the changes in humidity and temperature. Lignum products were engineered in a way so that the wood does not come into direct contact with water. Every block has a unique pattern of wood, which makes it one of a kind in the world.

EK Launches Active Backplates for ASUS TUF RTX 3080 and 3090 GPUs

EK, the leading computer cooling solutions provider, is introducing another addition to the EK Quantum Line. The EK-Quantum Vector TUF RTX 3080/3090 active backplate is made to complement the existing EK-Quantum Vector TUF RTX 3080/3090 water blocks and actively cool the backside of ASUS TUF GeForce RTX 3080 and 3090 GPUs.

EK-Quantum Vector TUF RTX 3080/3090 Active Backplate links the water block and active backplate with a new terminal, which replaces the stock terminal that comes with your water block. This way, the whole enclosure requires only one inlet and one outlet, removing unnecessary additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks, allowing maximum cooling.

EK Introduces Quantum Convection D5 Covers and DDC Heatsinks

EK, the leading computer cooling solutions provider, is launching its new Quantum Line products for the DDC and D5 pumps, the EK-Quantum Convection D5 and EK-Quantum Convection DDC. These D5 covers and DDC heatsinks are available in three distinct finishes - Silver, Black, and Nickel - to provide users with different aesthetic options.

The market-leading D5 pumps get a CNC-machined aluminium cover, the EK-Quantum Convection D5, which is compatible with EK-Quantum Reflection distribution plates that feature a D5 pump and the D5-based EK-Quantum Kinetic FLT pump-reservoir combos. It is available in three finishes - anodized Silver, Black, and in a Nickel-plated variant. It can be fitted over genuine D5 pumps. It is designed to improve the aesthetics of pumps. A rectangular design with a convenient hole for routing the cable and hiding it as much as possible allows for a cleaner look of the pump.

EK Launches ROG Crosshair VIII Hero Monoblock in Full Nickel Flair

EK, the premium liquid cooling gear manufacturer, is releasing a Full Nickel version of the EK-Quantum Momentum ROG Crosshair VIII Hero monoblock. This monoblock is engineered specifically for the ROG Crosshair VIII Hero and ROG Crosshair VIII Dark Hero motherboards and features a full-metal design that possesses unrivaled durability and a premium finish. This complete all-in-one (CPU and motherboard) liquid cooling solution for Ryzen AMD processors is compatible with the X570-based ROG Crosshair VIII Hero and Dark Hero motherboards.

The monoblock is equipped with the latest-generation EK cooling engine, used in the Quantum Line to ensure the best possible CPU cooling while not reducing the flow to other components. This water block directly cools AM4 socket type CPU as well as the voltage regulation (MOSFET) module. Liquid flows directly over all critical areas, providing enthusiasts with a great solution for high and stable overclocks. Like every EK monoblock, the EK-Quantum Momentum ROG Crosshair VIII Hero D-RGB also features a high flow design and can be easily used with weaker water pumps or lower pump speed settings as well.

EK Launches Active Backplate For Zotac Trinity RTX 3080/3090

EK, the leading computer cooling solutions provider, is introducing another addition to the EK-Quantum Line. EK-Quantum Vector Trinity RTX 3080/3090 active backplate is made to complement the existing EK-Quantum Vector Trinity RTX 3080/3090 water blocks and actively cool the backside of ZOTAC Trinity GeForce RTX 3080 and 3090 GPUs.

EK-Quantum Vector Trinity RTX 3080/3090 active backplate links the water block and active backplate part with a new terminal, which replaces the stock terminal that comes with your water block. This way, the whole enclosure requires only one inlet and one outlet, removing unnecessary additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks, allowing maximum cooling.

(EKWB) New Class of Cooling - Active Backplates for RTX 3080, 3090 Reference GPUs

EK, the leading computer cooling solutions provider, is introducing a cutting-edge addition to the EK-Quantum Line. EK-Quantum Vector RE RTX3080/3090 active backplate is made to complement the existing EK-Quantum Vector RE RTX 3080/3090 water blocks and actively cool the backside of a reference design NVIDIA GeForce RTX 3080 and 3090 GPUs.

EK-Quantum Vector RE RTX 3080/3090 Active Backplates
EK-Quantum Vector RE RTX 3080/3090 active backplate links the water block and active backplate part with a new terminal, which replaces the stock terminal that comes with your water block. This way, the whole enclosure requires only one inlet and one outlet, removing unnecessary additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks, allowing maximum cooling.

EK Launches First Magnitude-Based Multiblock Made for Z490 Aorus Xtreme Motherboard

EK, a premium liquid cooling gear manufacturer, releases a new and different Momentum monoblock - in this case, called multiblock - for Intel Z490 chipset-based Aorus motherboard. This multiblock is named EK-Quantum Momentum Aorus Z490 Xtreme and is specifically engineered for the Z490 Aorus Xtreme motherboard from Gigabyte.

This is a completely new approach to liquid-cool the Intel Socket 1200 Series processors and the entire VRM section of the Aorus Z490 Xtreme motherboard. This is the first EK Momentum series monoblock that utilizes the award-winning EK Magnitude CPU water block cooling engine. This water block directly cools the Intel 1200 socket-type CPU, as well as the power stages, chokes, and 10G LAN controller chip. Liquid flows directly over all critical areas, providing enthusiasts with a great solution for high and stable overclocks. This monoblock also comes with sophisticated addressable D-RGB lighting, which connects to a standard 3-pin 5 V D-RGB addressable header, called D_LED (Addressable LED Strip Header) on the Aorus Z490 Xtreme.

EK Launches New Monoblock for ROG Maximus XII Hero

EK, the premium liquid cooling gear manufacturer, releases a new Momentum Monoblock for ROG Maximus XII Hero - an Intel Z490 chipset-based motherboard. The EK-Quantum Momentum ROG Maximus XII Hero monoblock is made available in Plexi and Acetal versions. The Plexi model is featuring addressable D-RGB LEDs compatible with ASUS AURA Sync software that offers full lighting customization for every single diode, at any given time.

This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Intel Socket 1200 Series Processors. The monoblock is covering the entire VRM section of the ROG Maximus XII Hero motherboard. This monoblock boasts the latest generation Velocity cooling engine, used in the EK Quantum Lineup to ensure the best possible CPU cooling without reducing flow to other components. It cools the CPU, as well as the voltage regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with an excellent solution for high and stable overclocks. Like every EK monoblock, the EK-Quantum Momentum Maximus XII Hero features a high flow design, easily used in systems with weaker water pumps or lower pump speed settings. The Plexi version of this monoblock comes with sophisticated addressable D-RGB lightning, which connects to a standard 3-pin 5 V D-RGB addressable header on the ROG Maximus XII Hero.

EK Expands Flow Indicator Portfolio With Nickel Variants

EK, the premium liquid cooling gear manufacturer from Europe, is releasing another series of flow indicators that belong to the Quantum Line. These Quantum flow indicators visually display the coolant flow rate, which is often hard to see with the naked eye. This allows you to instantly see if your loop operation is nominal or there's trouble with the pump or flow in some other area. It also makes the loop look even cooler! It features addressable RGB illumination where the LEDs are covered with a stylish nickel-plated aluminium piece that hides hotspots. Aside from the standalone version, there are two more that mount directly on the EK-Quantum Vector GPU water blocks. All three come with nickel-plated aluminium cover.

This standalone nickel-plated flow indicator features three female G1/4" ports. It can be mounted in the middle of a tube-run with two fittings or fastened to any G1/4" port on a radiator, pump, or even a block by using a dual male-threaded extender. Any of the ports can be used as either inlet or outlet. It can be installed in a straight flow-through setup, or it can replace a 90° angled fitting or a 90° bend in your loop.

EK Launches One Plexi and One Acetal Monoblock for the GIGABYTE Z490 AORUS Master

EK, the premium liquid cooling gear manufacturer, is releasing its first of many Momentum Monoblocks for Intel Z490 chipset-based motherboards - the EK-Quantum Momentum Aorus Z490 Master. This monoblock is specifically engineered in Plexi and Acetal versions for the Aorus Z490 Master motherboard from Gigabyte. The addressable D-RGB LED in the Plexi monoblock is compatible with Gigabyte RGB Fusion 2.0 control and offers full lighting customization for every single diode at any given time. This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Intel Socket 1200 Series Processors. The monoblock is covering the entire VRM section of the Aorus Z490 Master motherboard.

This monoblock boasts the latest generation Velocity cooling engine, used on the EK Quantum Lineup, to ensure the best possible CPU cooling without reducing flow to other components. It cools the CPU, as well as the voltage regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with an excellent solution for high and stable overclocks. Like with every EK monoblock, the EK-Quantum Momentum Aorus Z490 Master D-RGB features high flow design and can be easily used in systems with weaker water pumps or lower pump speed settings. The Plexi version of this monoblock also comes with sophisticated addressable D-RGB lightning, which connects to a standard 3-pin 5 V D-RGB addressable header which is called D_LED (Addressable LED Strip Headers) on the Aorus Z490 Master.

EK Water Blocks Announces the EK Quantum Flow Indicators

EK, the European premium liquid cooling gear manufacturer, is releasing a series of unique flow indicators that belong to the Quantum Line. These Quantum flow indicators visually represent the coolant flow rate, which is often hard to see with the naked eye. This can be very useful to instantly see if your loop operation is nominal or there's trouble with the pump or flow in some other area as well as looking cool! It also features addressable RGB illumination where the LEDs are covered by a stylish black anodized aluminium cover to hide the hotspots. Aside from the standalone option, there are two more that mount directly on the EK-Quantum Vector GPU water block.

This standalone flow indicator features three G1/4" ports, all of which are female. It can be mounted mid tube run with two fittings or fastened to any G1/4" port on a radiator, pump, or even a block via the use of a dual male-threaded extender. Any of the threads can be used as either inlet or outlet. It can be used in a straight flow-through setup, or it can replace a 90° angled fitting, or a 90° bend in your loop.

EK Water Blocks Announces EK-Quantum Inertia D5 Body D-RGB Pump-Tops

EK, the European premium liquid cooling manufacturer, is launching EK-Quantum Inertia Body standalone pump-tops that are designed for D5 pumps. These standalone tops offer increased hydraulic performance (up to 15%) compared to the original factory top and feature sophisticated D-RGB LED lighting and a design that seamlessly blends with the rest of the EK Quantum Line.

Inertia standalone tops come in two different models, with either a CNC-machined black POM acetal or CNC-machined cast-acrylic. Proper LED illumination without unwanted LED hotspots is achieved with a black cover on the Plexi model and diffused by a milky-white piece on the acetal model. These products are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB (aRGB) header.

EK Quantum Torque Series Fittings Expanded With Static Extenders

EK, the premium water cooling gear manufacturer, is extending the Quantum Line Torque fittings with static extenders. With these premium interconnects, it will become very easy to get the correct positioning of the fitting to lessen any work when tube routing or attach a component directly to another via an M-M static extender. Aesthetically they are a perfect match with the EK-Quantum Torque fittings.

EK Pumpless Quantum TBE DDC Pump-Reservoir Combos Hitting the Market

EK, the premium liquid cooling gear manufacturer based in Europe, is releasing pumpless versions of the Quantum Line pump-reservoir combo units - the EK-Quantum Kinetic TBE 160 DDC Body D-RGB. This means the customer can attach his already owned DDC pump allowing for a more affordable upgrade process from the previous generation of reservoirs. EK-Quantum products come with sophisticated 5V D-RGB addressable LEDs which can be controlled through your motherboard RGB control software.

EK-Quantum Kinetic TBE DDC Body D-RGB is the stand-alone pumpless version of the newly released tubular style Kinetic TBE combo units made for DDC pumps. This means the customer is able to upgrade his old DDC-based combo unit or to utilize any existing previously owned DDC pump. This combo unit is equipped with a total of six G1/4" ports so that users can choose the most optimal setup for their liquid cooling loops.

EK Waterblocks Releases Stand-Alone D5 Pump With Quantum Top

EK Water Blocks, the world-renowned premium liquid cooling manufacturer, is releasing EK-Quantum Inertia D5 PWM D-RGB standalone pump units. These standalone pumps are an evolution of the very popular and successful EK-XTOP Revo D5 PWM pumps, now available with sophisticated D-RGB LED lighting and an updated design aligning with the EK Quantum Line. These units offer increased hydraulic performance (up to 15%) compared to the original factory top.

EK Water Blocks EK-Quantum Power Kits Roll Out

EK Water Blocks, the premium liquid cooling gear manufacturer, is launching the new EK-Quantum Power Kits that are based on EK's successful RGB kits, but this time with complete D-RGB support and all-Quantum Line products, with various added accessories. The Kits are aimed at enthusiasts who have powerful PC hardware and want a very high-end solution for cooling that hardware without having to pick custom loop parts themselves. These Quantum kits will make the loop building experience easier thanks to the extra accessories. Additional benefits also come from D-RGB (addressable RGB), dye pack for creating own coolant color, two 90 degree fittings, reservoir tube clamps for alternative mounting, and more. These kits come in two sizes - 240 and 360 which designate the size of the radiator.

EK Expands on Quantum Kinetic TBE Series Products With DDC-Powered Variants

EK, the premium liquid cooling gear manufacturer from Slovenia, EU, is adding more options to its Quantum Line Kinetic TBE products with DDC pump-based combo units. These new DDC-powered combos offer very high head pressure and good flow rates in a small footprint. This makes them very convenient for smaller cases that house powerful hardware with multiple water blocks. EK-Quantum products come with sophisticated addressable D-RGB 5 V LEDs that can be controlled through your motherboard's RGB control software or EK-Loop Connect controller unit. Besides the upgraded loop routing capabilities of the new small form factor combo units, EK is putting a lot of emphasis on the D-RGB implementation with no visible LED hotspots.

The most popular small form factor cylindrical pump-res combo on the market is redesigned, upgraded, and better in every way. The top is now featuring three G1/4" ports. One of the ports can be used with the included nickel-plated brass internal tube, which helps prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also be used for filling the system or adding additional upcoming accessories (thermal probes, LEDs, etc.) The internal tube can not be used in conjunction with the anti-Vortex insert on 120 models due to height restrictions.

EK Waterblocks Unveils VTX-Powered Kinetic Reservoir+Pump Combo Units

EK, the premium liquid cooling gear manufacturer from Slovenia, EU, is releasing new Quantum Line VTX pump-based combo units. These new VTX pumps feature a DDC-compatible mount, very high head pressure, and good flow rates in a small footprint that is ideal for smaller cases. EK-Quantum products come with sophisticated addressable D-RGB 5 V LEDs that can be controlled through your motherboard's RGB control software or EK-Connect controller unit. Besides the upgraded loop routing capabilities of the new small form factor combo units, EK is putting a lot of emphasis on the D-RGB implementation with no visible LED hot-spots.

The most popular small form factor cylindrical pump-res combo on the market is redesigned, upgraded, and better in every way. The top is now featuring three G1/4" ports. One of the ports can be used with the included nickel-plated brass internal tube, which helps prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also be used for filling the system or adding additional upcoming accessories (thermal probes, LEDs, etc.) The internal tube can not be used in conjunction with the anti-Vortex insert on 120 models due to height restrictions.

Fractal Design Cases Get a D5 Powered EK Distribution Plate

EK, a premium water cooling gear manufacturer, in partnership with the prestigious Swedish case manufacturer Fractal Design, is launching the EK-Quantum Reflection Fractal ATX D5 PWM D-RGB - a custom-designed water cooling reservoir, routing and pump solution made to fit several Fractal Design ATX-size cases. This distro plate is specifically designed to provide an advanced water cooling solution with a market-leading D5 pump for users who are building custom loop liquid cooling in Fractal Design cases.

It is designed to simplify the process for beginner PC builders who are entering the hard tubing custom loop liquid cooling world, as well as to bring the slim-lined EK Quantum aesthetics to an already elegant case.
EK distro plate for Fractal Design cases EK distro plate for Fractal Design cases EK distro plate for Fractal Design cases EK distro plate for Fractal Design cases EK distro plate for Fractal Design cases

EK Announces Quantum Momentum ROG Rampage VI Encore D-RGB Monoblock

EK, the European premium liquid cooling gear manufacturer, is releasing a new Intel X299 socket based monoblock belonging to the Quantum Line of products, the EK-Quantum Momentum ROG Rampage VI Encore D-RGB. This monoblock is engineered specifically for the ASUS ROG Rampage VI Extreme Encore motherboard from ASUS.

EK-Quantum Momentum ROG Rampage VI Encore D-RGB
This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Intel Socket 2066 Core X-Series Processors and the monoblock is covering the entire VRM section of the ASUS ROG Rampage VI Extreme Encore motherboard.

EK Collaborates with In Win for the EK-Quantum 909EK Silver Limited Edition Case

EK, the leader in custom loop liquid cooling is proud to announce the launch of a limited edition product which is a result of a successful collaboration between EK and In Win, the renowned case manufacturer. It started as the "best build of CES" and now it is sold in a limited edition under the name EK-Quantum In Win 909EK - Silver Limited Edition.

The EK-Quantum In Win 909EK case is a unique and heavily modified version of the very popular high-end In Win 909 case. The case itself is wider than a regular In Win 909 case in order to be able to fit two thick 480 mm XE radiators with their fans. It features an integrated distribution plate which acts also as a motherboard tray, and it can support a dual D5 pump setup. This makes it really special as there is no similar case on the market. The EK-Quantum In Win 909EK is a limited edition case and it is limited to only 200 pieces.
Return to Keyword Browsing