Thermalright today introduced the Peerless Assassin 120 MINI series of medium-sized dual fin-stack CPU coolers, which come in two trims—all black and all white. As its name suggests, this is a compacted variant of the Peerless Assassin 120 cooler from 2021. Its design involves not just a smaller heatsink, but also a single fan configuration, with a single 120 mm fan located between the two fin-stacks, pulling air from one of the stacks, and pushing it through the next. With its fan in place, the Peerless Assassin 120 MINI measures 125 mm x 110 mm x 145 mm (WxDxH), with 135 mm height without the fan. For comparison, original Peerless Assassin 120 measures 125 mm x 135 mm x 157 mm, and has a dual 120 mm push-pull fan setup. Including the fan, the Peerless Assassin 120 MINI weighs 820 g.

The design of the Peerless Assassin 120 MINI involves a nickel plated C1100 copper base, through which six 6 mm-thick copper heatpipes pass, with the two aluminium fin-stacks along their two ends. The included Thermalright TL-D12B fan features a fluid dynamic bearing, turns at speeds of up to 1,500 RPM, pushing up to 66.87 CFM of airflow, at 1.53 mm H₂O static pressure, and 25.6 dBA maximum noise. Among the CPU socket types supported by the cooler are LGA1700, AM5, AM4, and LGA1200. The company didn't reveal pricing.

Thermalright today introduced the TL-M12 fan. This conventional thickness 120 mm fan is designed look good as a rear exhaust, or as part of a radiator's ventilation. Thermalright focused on aesthetic touches to the fan frame when viewed from the sides. Two of the frame's sides has an infinite-reflection ARGB LED element. The bore of the frame, and the impeller itself aren't illuminated. The fan comes in two color options—black and white (TL-M12W). It takes a 4-pin PWM input for its main function, and 3-pin addressable RGB for the lighting. The Thermalright TL-M12 features a fluid dynamic bearing. It turns at speeds of up to 1,500 RPM, pushing up to 47.6 CFM of airflow, at 1.31 mm H₂O static pressure; and with a maximum noise output of 23.2 dBA. The company didn't reveal pricing.

Thermalright today introduced the AXP90-X53 Full copper CPU cooler. A variant of the 53 mm-tall AXP90-X53 top-flow air cooler, this one comes with a nearly 100% copper build, with the CPU contact base, heatpipes, and fin-stack made entirely of the red metal. The only bits on the heatsink that aren't made of copper are the steel retention clips. A copper base plate pulls heat from the processor, conveying it to four 6 mm-thick copper heatpipes, which pass through a copper fin-stack. This is ventilated by a 15 mm-tall 92 mm fan. The base may look like it's plain copper, but has C1100 nickel-plating, and can take even those kinds of TIM that would damage copper over time.

The included Thermalright TL-9015R 92 mm fan features an orange impeller with a contrasting red frame. It features a fluid dynamic bearing, and takes in 4-pin PWM input. It turns at speeds of up to 2,700 RPM, pushing up to 42.58 CFM of airflow, at 1.33 mm H₂O static pressure, and 22.4 dBA noise output. With the fan in place, the Thermalright AXP-90-X53 Full copper measures 94.5 mm x 95 mm x 53 mm, weighing around 600 g (including fan). CPU socket types supported include LGA1700, AM5, LGA1200, and AM4. The company didn't release pricing information.

Thermalright has taken yet another low-key approach to announcing new products—the Taiwan hardware cooling specialist has updated its website with Heilos thermal pads. The model name looks to be a typo—should they have used "Helios" instead? A prominent sun graphic is placed on the bottom left of Thermalright's packaging for both of the Intel and AMD variants. It is unfortunate that something got lost in translation, or a spellcheck did not pick up on the small error before going to print/publication. Anyway...Thermalright is offering two sizes, with an identical 0.2 mm thickness—40x40 mm for AMD's AM4/AM5 CPU platforms, and a smaller pad (40x30 mm) for Intel LGA115X/1200/1700 CPUs. Pricing and availability is TBD.

These easy-peel away applicators provide an alternative route for users who fret about the best way to deal with traditional tubes of thermal paste. Tom's Hardware has pored over the Heilos specs—these pads offer thermal conductivity performance (8.5 W/mK) and resistance (0.04°C cm²/W), comparable (in their opinion) to "inexpensive" tubes of Arctic MX-4 and MX-5. The latter ranks at number four on the publication's "list of the best thermal pastes." Older thermal pads from other manufacturers have been criticized for falling short in terms of cooling performance, when cross-referenced against market leading thermal pastes—it is encouraging to see Thermalright addressing these concerns (specs-wise). We hope that evaluation samples have been sent out to review outlets.

Thermalright introduced the Assassin X 120 PLUS V2 tower-type CPU cooler. This is a spruced up version of the company's Assassin X series coolers, featuring a thicker fin-stack compared to the original Assassin X; four nickel-plated copper heatpipes that disperse in a unique "square" pattern through the fin-stack; a fancy die-cast aluminium top-plate for the heatsink; and two included 120 mm fans intended to be installed in a push-pull configuration (most of the Assassin X series coolers include just one).

The cooler uses a nickel-plated copper base, from which four 6 mm-thick copper heatpipes make their way through the aluminium fin-stack. The two included fans are of different types. The TL-C12B V2 fan meant for the "push" arrangement features a fluid-dynamic bearing, takes in 4-pin PWM input, turns at speeds of up to 1,500 RPM, pushing up to 66.17 CFM of airflow, at 1.53 mm H₂O static pressure, and a maximum noise output of 25.6 dBA. The TL-C12RB V2 meant for the "pull" has mostly the same specs, except 58 CFM airflow. With its fans in place, the Thermalright Assassin X 120 PLUS V2 measures 120 mm x 100 mm x 153 mm (WxDxH), weighing 815 g (545 g heatsink + 2x 135 g fans). Among the CPU socket types supported are LGA1700, AM5, AM4, LGA1200, and LGA115x. The company didn't reveal pricing.

Thermalright today introduced the Assassin Spirit 120 V2, a slim, tower-type CPU air cooler. Measuring 120 mm x 48 mm x 154 mm (WxDxH), and weighing in at 500 g, this cooler is designed for thermal loads of up to 235 W, which means it should run even high-end processors at their stock settings, at lower noise levels from the single fan. Its design involves a copper base, from which four 6 mm-thick copper heatpipes make direct contact with the processor, conveying heat through the aluminium fin-stack, which is capped off by a die-cast metal top-plate.

The TC-C12C V2 120 mm fan included with the Thermalright Assassin Spirit 120 V2, features a fluid-dynamic bearing, takes in 4-pin PWM input, turns at speeds of up to 1,500 RPM, pushing up to 66.17 CFM of airflow, at a maximum static-pressure of 1.53 mm H₂O, and noise output of 25.6 dBA. A 2 g syringe of 9.5 W/mK Thermalright TF4 thermal paste comes included with the cooler. Among the CPU socket types supported are LGA1700, AM5, AM4, LGA1200, and LGA115x. The company didn't reveal pricing.

Thermalright has quietly updated its product page this week, and has rolled out another SSD cooler that looks quite familiar. The HR-10 2280 PRO M.2 SSD heatsink is now featured on their website, where it sits close to a similar looking model - the now standard HR-10 2280. This non-PRO version was revealed late last month as a step up from the older HR-09 SSD heatsink. The brand new HR-10 2280 PRO sports a key upgrade over its passively cooled older siblings - a 30 mm 12 V cooling PWM fan has been integrated into the middle of the fin stack's body. Thermalright's latest M.2 heatsink also fully prepared for and compatible with the next generation of SSDs - its revised design will accommodate Gen 5 solid-state drive standards.

The HR-10 Pro is consists of four 5 mm-thick nickel-plated copper heatpipes that make contact with a user appointed M.2-2280 SSD, over a mirror-finish nickel-plated copper base-plate. The heatpipes loop through a dense aluminium fin-stack with slats designed to maximize surface area for highly effective heat dissipation. A die-cast metal top-plate with company branding completes the package. The HR-10 PRO weighs in at 95 g (so 10 g more than the standard HR-10). The heatsink measures 23.7 mm x 90.3 mm x 43.8 mm (WxDxH). Thermalright has not revealed any pricing or stock availability at the time of writing.

Air-based CPU cooling maestros Thermalright are expanding their liquid-based cooler portfolio with the addition of two white color-schemed coolers under the Frozen Prism White series. These include two models based on the radiator size—the Frozen Prism White 360, and the Frozen Prism White 240. Their design sees white cover everything from the radiator frames, to the radiator fins, the fiber sleeving of the coolant tubes, the included fans, their frames and impellers; and of course the pump-block itself.

An illuminated ARGB ornament on top of the pump-block; and the illuminated fans, make up their lighting setup. These use standard 3-pin ARGB headers. Each of the included TL-E12W-S V2 fans turns at speeds of up to 1,850 RPM, pushing up to 70.4 CFM of airflow, at 2.64 mm H₂O static pressure. Among the CPU socket types supported by the Frozen Prism series are Intel Socket LGA1700, LGA1200, LGA2066, and LGA115x; and AMD Socket AM5 and AM4. The company didn't reveal pricing.

Thermalright today rolled out the HR-10 2280, a step up from the company's HR-09 2280 M.2 SSD heatsink from 2022. Like its predecessor, the HR-10 uses two 5 mm-thick nickel-plated copper heatpipes that make contact with an M.2-2280 SSD over a mirror-finish nickel-plated copper base-plate, but the heatpipes loop through a denser aluminium fin-stack with slats that maximize surface area for heat dissipation. There's also a die-cast metal top-plate. The HR-10 is a tiny bit heavier than the HR-09, weighing in at 85 g (versus 80 g, but with a more optimized design). The heatsink measures 23.7 mm x 90.3 mm x 43.8 mm (WxDxH). The company didn't reveal pricing.

Thermalright introduced the Ryzen Mounting System upgrade kit that lends support for Socket AM5 and AM4 to many of its legacy coolers, letting you orient them the correct way. There are two types of these upgrade kits, that support two different kinds of Thermalright's coolers. The TR-AM5-A kit is meant for TRUE Spirit 90 series, Archon IB-E X2 series, Silver Arrow ITX, TRUE Spirit 140 series, and TRUE Spirit 90 series. The TR-AM5-B kit, on the other hand, is meant for the Silver Arrow SB-E series, AXP-200 R, AXP-200 Macho, Archon SB-E, and Silver Arrow ITX-R. These kits aren't free, and when they go on sale later this month, they will be priced around $9.99.

Thermalright today introduced the Assassin X 90 SE, a compact tower-type CPU cooler designed to replace the stock CPU cooling solution with something that's quieter at stock frequencies. The aluminium fin tower-type cooler features a typical design for its kind—four 6 mm-thick nickel-plated copper heat pipes make direct contact with the CPU at an aluminium base; with their ends passing through an aluminium fin-stack that's capped off by a die-case top-plate. This is then ventilated by an included Thermalright TL-G9B 92 mm PWM fan.

The defining feature is the cooler's height of just 118 mm. With its fan in place, the cooler measures 94 mm x 77 mm x 118 mm, weighing 445 g. The included 92 mm fan features fluid dynamic bearing, takes in 4-pin PWM input, turns at speeds of up to 2,400 RPM, pushing up to 43 CFM of airflow at 1.51 mm H₂O pressure, and has a noise output of 27.3 dBA. Among the CPU socket types supported are LGA1700, AM5, AM4, and LGA1200. The company didn't reveal pricing.

Thermalright today introduced the Phantom Spirit 120 SE premium air-type CPU cooler. The cooler features a dual fin-stack (type-D) design. Seven 6 mm-thick nickel-plated copper heatpipes make indirect contact with the CPU through a nickel-plated C1100 mirror-finish copper base, passing through two aluminium fin-stacks. Two 120 mm fans are included, which can be installed that one of them pushes fresh air through the first fin-stack, while the second one acts as a conveyor, and is located between the two fin-stacks (typical type-D cooler arrangement).

Each of the two included TL-C12B V2 fans takes in 4-pin PWM input, turn at speeds of up to 1,500 RPM, pushing up to 66.17 CFM of airflow, at 1.53 mm H₂O static pressure, and a maximum noise output of 25.6 dBA. The fans feature fluid dynamic bearings. With the fans installed, the Thermalright Phantom Spirit 120 SE measures 130 mm x 125 mm x 154 mm (LxWxH), weighing 1.03 kg. Among the CPU socket types supported are LGA1700, AM5, AM4, and LGA1200. The company didn't reveal pricing.

Thermalright today rolled out the SI-100 White ARGB, a low-profile aluminium fin-stack CPU cooler. The cooler features a "C-type" design. An aluminium fin-stack is arranged along the plane of the motherboard, skewered by six 6 mm-thick copper heatpipes, which pull heat from a C1100 pure-copper base. The base and heatpipes are nickel-plated (the heatpipes additionally have the matte-white paintjob); while the aluminium fins are anodized.

The included 120 mm TL-E12W-S fan features addressable RGB lighting, takes in 4-pin PWM for its main function and 3-pin ARGB for the lighting. It turns at speeds of up to 2,000 RPM, pushing up to 72.37 CFM of airflow, at up to 2.87 mm H₂O pressure, and 27.7 dBA maximum noise output. It features a durable fluid-dynamic bearing. With the fan in place, the Thermalright SI-100 White ARGB measures 120 mm x 120 mm x 99.8 mm (WxDxH), weighing 640 g. Among the CPU socket types supported are LGA1700, AM5, AM4, LGA1200, and LGA115x. The company didn't reveal pricing.

Thermalright today introduced the SI-100, a C-type aluminium fin-stack CPU cooler. This appears to have a thicker fin-stack than the company's AXP-100-series coolers. Its design involves a nickel-plated C1100 copper base, from which six 6 mm-thick nickel-plated copper heat pipes emerge, conveying heat through a fin-stack that propagates along the plane of the motherboard. This fin-stack is ventilated by an included 120 mm TL-E12 fan. The fan features fluid-dynamic bearing, and has a top speed of 2,000 RPM, pushing up to 72.37 CFM of airflow, with 2.87 mm H₂O static pressure, and noise output of 27.7 dBA. With its fan in place, the cooler measures 120 mm x 120 mm x 99.8 mm (WxDxH), weighing 640 g. Among the CPU socket types supported are AM5/AM4, LGA1700, and LGA1200/LGA115x. The company didn't reveal pricing.

Thermalright today released the Ultra 120EX Rev. 4, a classic tower-type CPU cooler. The cooler is the fourth revision of the Ultra line of coolers by the company, and offers an updated fin design, as well as a high static-pressure fan. Six 6 mm-thick nickel-plated copper heat-pipes draw heat indirectly through a copper base with the same electroplating (you can pair it with liquid-metal TIM without worrying about corrosion). These heat pipes pass though an aluminium fin-stack with 52 S-shaped fins that are 0.4 mm-thick and spaced 1.6 mm apart. The fin-shape increases turbulence for improved heat-dissipation to the airflow.

The included TL-B12G 120 mm fan turns at speeds of up to 2,150 RPM, pushing up to 69 CFM of airflow, at 2.87 mm H₂O static pressure. The fan features a long-life fluid-dynamic bearing. With its fan in place, the Thermalright Ultra 120EX Rev. 4 measures 132 mm x 89.6 mm x 157 mm (WxDxH), weighing 865 g. Among the CPU socket types supported are AMD Socket AM5, AM4; and Intel LGA1700, and LGA1200. The company didn't reveal pricing.

Thermalright today introduced the AXP90-X53 Full Black, a premium top-flow air-based CPU cooler. The cooler is designed for a Z-height of 53 mm when fully assembled (including fan), making it fit for certain SFF/low-profile use-cases. Its design involves a mirror-finish nickel-plated C1100 copper base, from which four 6 mm-thick heat-pipes of the same material pass through, conveying heat through a stack of 54 dark-tinted aluminium fins.

The fin-stack is ventilated by a 15 mm-thick 92 mm fan. This fan takes in 4-pin PWM input, and features a double ball-bearing setup. It turns at speeds of up to 2,700 RPM, pushing up to 42.58 CFM of airflow, at up to 22.4 dBA of noise output. Among the CPU socket types supported by the Thermalright AXP90-X53 Full Black are LGA1700, LGA1200, and AM4. With its fan in place, the cooler measures 94.5 mm x 95 mm x 53 mm (WxDxH), weighing 540 g. The company didn't reveal pricing.

Taiwanese company Thermalright has recently launched the LGA1700-BCF (Bending Corrector Frame) to mitigate the risk of bending and warping with 12th Generation Intel Alder Lake processors. Intel has previously disclosed that their Alder Lake processors could exhibit mild warping as a result of changes to the integrated heatspreader (IHS) design but that the processors still performed within specification. This new product from Thermalright aims to prevent this warping despite Intel advising that any 3rd party modifications could void the warranty for Alder Lake processors. The Thermalright LGA1700-BCF is now available to purchase for 39 RMB (6 USD) in red and silver color options with support for H610, B660, and Z690 motherboards.

We saw such a contraption taking shape for a while now, as M.2 NVMe SSD transfer-rates increase, and controller thermal-throttling begin to significantly impact performance. The new HR-09 2280 Pro by Thermalright is a humongous heatsink designed for SSDs in the M.2-2280 form-factor. Its design involves a nickel-plated copper base-plate, from which two 6 mm heat pipes convey heat through an aluminium fin-stack that's 74 mm tall. 24 mm wide, and 86 mm in length; weighing 90 g. The heatsink does not appear to have latches for fans, nor are any fan-clips included; but one can improvise clips for a 60 mm fan. The company developed a smaller version of this, called simply the HR-09 2280. This one uses a single 6 mm-thick heat-pipe, and its fin-stack is just 48 mm tall; with a total weight of 80 g. The company didn't reveal pricing.

Thermalright today introduced the AXP120-X67, a premium low-profile, top-flow CPU cooler, with a height of 67 mm with the fan in place. The cooler features a "C-type" aluminium fin-stack heatsink, in which heat is drawn from the C1100-grade nickel-plated copper base, and conveyed to the fin-stack via six 6 mm-thick heat-pipes of the same material. The fin-stack is arranged along the plane of the motherboard, and is ventilated by a 15 mm-thick 120 mm fan in a top-flow fashion.

The included 120 mm Thermalright TL-C12015 fan comes with 15 mm thickness, features a fluid-dynamic bearing, turns at speeds of up to 1,800 RPM, pushing up to 59 CFM of airflow, at a static pressure of 1.36 mm H₂O, and 26.1 dBA maximum noise output. The cooler measures 120 mm x 123.5 mm x 67 mm (WxDxH), weighing 490 g. Among the CPU socket types supported are LGA1700, LGA1200, and AM4. The company didn't reveal pricing.

Thermalright today introduced the Macho MAXX, its latest single-tower type CPU coolers. The Macho line of tower-type coolers see Thermalright's designers choose a single large aluminium fin-stack over a "D-type" dual fin-stack approach. With its fan in place, the cooler measures 140 mm x 124 mm x 158 mm (WxDxH), weighing 780 g.

The design of the Macho MAXX involves a nickel-plated C1100-grade copper base, from which six 6 mm-thick copper heat pipes emerge, conveying heat across the large stack of 31 fins, which is ventilated by a 140 mm TL-D14 fan. This fan turns at speeds of up to 1,500 RPM, pushing up to 77.8 CFM of airflow, at up to 2.09 mm H₂O static pressure, and up to 25.6 dBA noise output. It features a fluid-dynamic bearing. Among the CPU socket types supported are LGA1700, LGA1200, and AM4. The company didn't reveal pricing.

Thermalright today introduced the TA120 EX Mini White, one of the company's more compact tower-type CPU coolers. The cooler is designed with a height of 135 mm, even though it uses a 120 mm fan for ventilation. It features a conventional tower type design, in which five 6 mm-thick copper heat pipes make indirect contact with the CPU at the base (nickel-plated C1100-grade copper with mirror finish), pushing heat through the fin-stack, which is ventilated by a TL-D12 PRO-W fan. It features a fluid-dynamic bearing, and turns at speeds of up to 1,850 RPM, pushing up to 82 CFM of airflow, with 2.1 mm H₂O static pressure, and 29.6 dBA noise output. Among the CPU socket types supported include LGA1700, AM4, and LGA1200. The company didn't reveal pricing.

Thermalright today rolled out the Peerless Assassin 120 SE White ARGB, a variant of the Peerless Assassin 120 cooler that the company originally launched in April 2021. For the most part, the new aluminium dual fin-stack cooler is identical to the original, spare for a few changes. As a "white" trim, the cooler is completely whitewashed in a matte white coating that covers the aluminium fins, the nickel-plated and copper heat pipes. The included TL-C12CW-S ARGB fans are a white variant of the TL-C12C-S, come with white frames, frosty impellers, and ARGB illumination. The original's fans were either all-black or all-white. Thermalright also did away with the decorative top-plate for the two fin-stacks, lowering the Z-height of the cooler to 155 mm, compared to 157 mm on the original. Lastly, the new cooler comes with out-of-the-box support for Intel Socket LGA1700, besides AM4 and LGA1200. The company didn't reveal pricing.

Thermalright today introduced the CFX thermal compound. The compound offers a wide temperature range of -50°C to 150°C, while being electrically non-conductive. Its conductivity is rated at 12 W/m-K, with a thermal impedance of 0.009 °C-cm²/W, and has a specific gravity of 2.3 at 25°C. The company didn't mention the composition or viscosity of the paste. It ships in 2 g syringes and includes a spatula, so it could be more on the viscous side. The company didn't reveal pricing or availability.

Thermalright today introduced the Valor Odin series of thermal pads that you can use to improve the cooling performance of your motherboard's VRM heatsinks, M.2 SSD heatsinks, or your graphics card's coolers (to better pull heat from the memory chips or VRM). The company claims that the pad offers thermal conductivity of 15 W/mK, which is in the league of thermal pastes. The pad uses aluminium nitride as a key ingredient, while maintaining electrical non-conductivity up to 9.8 kV, and has a density of 3.1 g/cc. There are three variants of the Thermalright Valor Odin based on pad thickness—1.0 mm, 1.5 mm, and 2.0 mm, all with the same density and thermal characteristics. Each pack includes a sheet measuring 95 mm x 50 mm, which you cut to size. The company didn't reveal pricing.

Thermalright today introduced the Assassin King 120 Mini WHITE ARGB, an interesting option from the company's fast-growing collection of air-type CPU coolers. The cooler is completely whitewashed—the aluminium fin-stack, the heat-pipes, even most of the base. The included TL-D12W-S 120 mm fan comes with a white frame and impeller, too, although the impeller is frost silicone, and diffuses ARGB illumination from the hub. Five 6 mm-thick copper heat pipes pull heat from a C1100 nickel-plated copper base, conveying heat to an aluminium fin-stack, which is ventilated by a 120 mm fan.

The TL-D12W-S fan features a fluid-dynamic bearing, turns at speeds of up to 1,500 RPM, pushing up to 64.87 CFM of airflow, at 1.53 mm H₂O static pressure, and 25.6 dBA noise output. It takes in 4-pin PWM for its main function, and 3-pin ARGB for the lighting. The Assassin King 120 Mini WHITE ARGB measures 120 mm x 96 mm x 135 mm (WxDxH), weighing 980 g. CPU socket types supported include LGA1200, LGA115x, AM4, and LGA2066. The company didn't reveal pricing.